Wastewater Pipe Equipment For Water And Wastewater Available In Indiana
-
PremiumManufactured by Tecnidro Srlbased in ITALY
Battery controller operated valve. Typical Applications: Irrigation, greenhouses, golf courses, turf, water ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
This cost-effective, industry-leading drone will help you to perform the same confined space inspections for less money. It can be successfully used for visual inspections of tanks, vessels, building structures, large-diameter gas, oil, storm, and wastewater sewer pipes. Built on the trusted DJI platform, the LUMICOPTER provides an unparalleled 150-degree wide-angle view, 4K image resolution, and ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
Hydraulically or Pneumatic operated. Typical Applications: Irrigation, water treatment, animal feeding ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve fully opens or shuts off in response to remote electric signals. Typical Applications: Irrigation, greenhouses, golf courses, turf, water ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
The valve reduces upstream pressure to a pre-set lower and constant downstream pressure value, regardless of fluctuating flow or varying upstream ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Many air sampling procedures call for remote site sampling where the vacuum source (air sampling pump) cannot be conveniently located in the same area where sampling is required. This may be due to a variety of reasons including explosive sampling environments, inaccessibility, and noise level restrictions. For this reason, HI-Q has developed two types of sample retrieval and exhaust ...
-
PremiumManufactured by Fluence Corporationbased in USA
Our Aspiral containerized wastewater treatment solutions come in several configurations to treat from 20 to 350 m3/d (13,000-90,000 GPD) of municipal wastewater. Aspiral L3 model: Treats up to 300 m3/d of raw municipal wastewater Plug-and-play solution equipped with all internal air and wastewater piping 40% of container volume is aerated by fine bubble diffusers for residual BOD removal Arrives ...
-
PremiumManufactured by Tecnidro Srlbased in ITALY
Hydraulically or Pneumatic operated. Typical Applications: Irrigation, water treatment, animal feeding ...
-
Manufactured by Saudi Arabian Amiantit Company Groupbased in SAUDI ARABIA
Amiantit employs Amipox technology to manufacture a range of GRE pipes, fittings, flanges and spools. Lightweight and easy to handle and install, GRE pipes have a smooth internal surface that reduces friction and enables a high pipe flow capacity. The low thermal conductivity of GRE pipes relative to steel (only one percent of steel values) minimises the cost of insulation and heat loss. ...
-
Distributed by Protank Ltdbased in USA
Protank offers the best plastic cone bottom storage tanks available today. All of our plastic tanks are available in 1.5 and 1.9 specific gravity. We can also offer some of our tanks in 2.0 SG. Protank's poly plastic cone bottom tanks are rotationally molded and are available in HDPE (polyethylene) as well as HDXLPE or XLPE (crosslinked polyethylene). Cone Bottom storage tanks are used for bulk ...
-
Manufactured by Chemical Process Piping Pvt. Ltd.based in INDIA
We manufacture GRE Pipes, Fittings, Ducts for Fire Water Service and Oil and Gas Plants, Chemical, Power Plants, Desalination. Sizes range from 15mm(NB) upto 4000mm(NB) and we can design for pressures upto 64 bars. The resin that we use is Epoxy Resin. The benefit of epoxy resin is that they are fire ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Naco’s fabricated C900/905 fittings are designed as a robust and corrosion-resistant alternative to cast iron pressure piping systems. Naco’s fabricated PVC CIOD fittings have a dimensional ratio (DR18 or DR25) equal to or greater than that of the pipe from which they are fabricated. Our fabricated fittings shall be manufactured from segments of PVC pipe bonded together conforming ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
Naco’s fabricated C900/905 fittings are designed as a robust and corrosion-resistant alternative to cast iron pressure piping systems. Naco’s fabricated PVC CIOD fittings have a dimensional ratio (DR18 or DR25) equal to or greater than that of the pipe from which they are fabricated. Our fabricated fittings shall be manufactured from segments of PVC pipe bonded together conforming ...
-
Manufactured by Quapus sa Srlbased in ITALY
Dimensions, sizes and threads are produced according to standards as UNE-EN 1452-3, UNE-EN 1452-3, DIN 8063. DIN 2999 – ISO 7 etc. A limited range of products is also available as ASTM – IPS sizes and NPT ...
-
Manufactured by Xiamen Erikeke Industrial Co.,Ltdbased in CHINA
Water supply and drainage standard UPVC three way equal tee PVC plastic pipe fitting Features: 1) Good chemicals and drugs resistance 2) Good electrical insulation 3) Both outside and idside surface are smooth, so small current resistance. 4) Simple installation 5) Light weight, easy to load and unload Applications: 1. City and town water supply system 2. Sea bed water supply system 3. ...
-
Manufactured by Mehta Metals Groupbased in INDIA
Inconel Alloy 600 Butt weld Pipe Fittings, Inconel 600 Butt weld Pipe Fittings, Inconel WPNC1 Buttweld Fittings, Inconel Alloy 600 Seamless Pipe Fittings, 2.4816, 2.4816 Butt weld Pipe Fittings, Inconel Alloy 600 Weldable Butt weld Fittings, UNS N06600 Buttweld Fittings, Inconel 600 Pipe Fittings, UNS N06600 Pipe Fittings, 600 Inconel Buttweld Fittings, Inconel 600 Butt weld Fittings ...
-
Manufactured by Mehta Metals Groupbased in INDIA
Incoloy 800HT Tubes Exporter, ASME SB 515 Incoloy Alloy 800 Welded Tube, Incoloy Alloy 825 Seamless Tubing, ASTM B407 Alloy 800HT Seamless Pipes Supplier, UNS N08800 Welded Pipes, Incoloy 825 Pipes Manufacturer in India. Incoloy UNS N08825 ERW Tubing Trader, DIN 1.4876 ERW Pipes, UNS N08800 Seamless Tubes Stockists, Incoloy UNS N08811 Welded Pipes Dealer, DIN 2.4858 Tubing, Incoloy Alloy 800 ...
-
Manufactured by Numax Steelsbased in INDIA
Numax Steel is a leading Copper Alloy Pipes & Tubes manufacturer, Copper Alloy Pipes & Tubes exporters & Copper Alloy Pipes & Tubes suppliers. The Copper Pipes and Tubes that Numax Steel manufacture and export are highly appreciated by our clients because of their high strength and corrosion resistant. We provide the best quality of Copper pipes & tubes with high durability. ...
-
Manufactured by Triton Alloys Incbased in INDIA
ASTM A182 Threaded Flanges, ASME B16.5 Threaded Flanges, ASME B16.5 Screwed Flanges, Carbon Steel Threaded Flange, Stainless Steel Threaded Flanges, ASTM A182 Threaded Flanges Suppliers In Mumbai, India. Triton Alloys inc ate similar to slip-on pipe flanges except the bote of Threaded flange has tapered threads. Threaded pipe flanges are used with pipes that have external threads. The benefit of ...
-
Manufactured by Diamond Plastics Corporationbased in USA
Diamond Plastics manufactures 4” through 15” solid-wall PVC sewer pipe in accordance with ASTM D3034, Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you