We couldn't find any wastewater ponds applications suppliers or service providers located in Quebec
Here is a list of applications results with suppliers serving Quebec
Wastewater Ponds Applications available in Quebec
-
Premium
Environmental technology solution for mining industry
Solving challenging design conditions with engineered Geosynthetic Clay Liners. Geosynthetic Clay Liners (GCL) are used in the construction of various mining facilities, including process solution ponds, heap leach pads, tailings storage facilities, stormwater containment, wastewater treatment ponds and closures. The service conditions in these mining applications are among the most demanding. Harsh environmental conditions provide a challenge to engineers designing the projects. In weather-sensitive, remote or ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Geosynthetic Lining for Mining Industry
Geosynthetics are used in construction of various components of modern mining facilities, including process solution ponds, heap leach pads, stormwater containment, wastewater treatment ponds and closures. Harsh environmental conditions provide a challenge to engineers designing the projects. In addition, increasing environmental and cost pressures are requiring lining systems to achieve greater performance levels than ever. GCLs are rapidly becoming a desired component of mining liner systems because of the ...
By CETCO based in New York, NEW YORK (USA).
-
Wastewater systems solutions for wastewater lagoons sector
A good mixing strategy can have a big impact on your entire system. Throughout the US there are tens of thousands of wastewater ponds with intense treatment for small cities and industries (e.g., the food processing industry), and perhaps just as many reactor basins in wastewater plants for large ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
-
Environmental protection solutions for the mining industry
GEOWEB geocells offer a better “solution set” to soil stability challenges for accessing sites over soft ground, controlling and containing stormwater, protecting geomembranes for basins, tailings, and heap leach pads, and reclaiming slopes at the time of closure. Through 3D confinement and strengthening of infill, less material—even on-site waste rock—may be used. GEOWEB solutions offer increased speed of operation, lower maintenance, safer installation, and a lower total cost of ...
By Presto Geosystems based in Appleton, WISCONSIN (USA).
-
Geared, gearless and multistage turbo blowers solutions for aeration for water/wastewater industry
Aeration Blowers for Water and Wastewater Need Energy Efficiency and Reliability. Lone Star offers geared, gearless and multistage turbo technologies to best match each aeration application and environment. Not only can Lone Star offer a blower to meet any specification, our energy efficient solutions will win any lifecycle analysis. Each process has different requirements and not one technology is always the best solution. We can complement our blowers with a complete aeration process control to offer an aeration ...
By Lone Star Blower, Inc. based in Houston, TEXAS (USA).
-
Wastewater treatment ponds
In rural areas, several thousand non-aerated and aerated pond wastewater treatment plants are operated in Germany, and in some regions the share of wastewater treatment plants is still 30% or more. These ponds are mostly designed for sizes of less than 5.000 P.E. and a simple carbon decomposition and do not meet today's inflow loads and outflow requirements. However, by cost-effective retrofitting of aerators and other components and adaptation of the process technology, the existing volumes can usually be ...
By ATB Water GmbH based in Porta Westfalica, GERMANY.
-
Liquid/solid separation solutions for the wastewater treatment ponds
SAF System For Title 22 Wastewater Reclamation / Tertiary Filtration. Heron Innovators manufactures Suspended Air Flotation (SAF) systems for removal of suspended solids from wastewater. SAF solutions are backed up by years of process knowledge and manufacturing ability. This particular project required the removal of specific components – algae and colloidal material – from the pond effluent. The goal was to extend filter cycle times, and achieve <9NTU water clarity prior to filtration for ...
By Heron Innovators based in Rocklin, CALIFORNIA (USA).
-
Water treatment and mixing equipment for Wastewater systems
Let's face it, wastewater is a tough, nearly thankless business. A lot can go wrong and before you know it, you're in violation. Regulations ever increase, compliance becomes more difficult, and odors get the phone ringing. Equipment breaks down. Energy costs go higher & higher. ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
-
Environmental solutions for the stormwater & wastewater industry
Design high-performing, ‘low environmental impact’ GEOWEB channels for stormwater conveyance, as well as for erosion protection of containment facilities. Protect impervious liners in lagoons and detention basins, preventing degradation and contaminant leakage. With the GEOWEB system, channel and basin designs can be customized for each project with vegetation, aggregate or concrete infill, offering more economical solutions than rip-rap, gabions or reinforced concrete systems. The GEOWEB ...
By Presto Geosystems based in Appleton, WISCONSIN (USA).
-
Oil separation and removal systems for Steel industry
From scale pits to cooling water and wastewater treatment areas or final discharge ponds, there are various points where oil is bound to meet and mix with water throughout the steel production ...
By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).
-
Membrane Distillation Unit for Oil & Gas and CTX
Zero liquid discharge (ZLD) in Oil & Gas and Coal-to-chemical (CTX) industries. To reuse every drop of freshwater from high TDS/COD waste ...
By Memsys Water Technologies GmbH based in Schwabmünchen, GERMANY.
-
PCSWMM - Advanced Modeling Software for Water Quality Modeling
Generate accurate non-point source pollutant loadings for TMDL, NPDES, MS4, CMOM and related studies. PCSWMM provide tools that help design control strategies for managing polluted stormwater released to receiving waters – making it easier to design to meet water quality ...
By Computational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA).
-
PCSWMM - Advanced Modeling Software for Detention Pond Design
Easily determine the size and configuration of effective detention ponds and their appurtenances for flood control and water quality protection. Ponds may be arbitrarily shaped and distributed around the catchment – in series, parallel or both – and may be operated according to arbitrary ...
By Computational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA).
-
Water treatment research for mining industry
Securing a reliable supply of water for extraction, handling and transportation is vitally important to mining companies looking to expand their operations. These companies will go to great lengths to meet this need, running pipelines hundreds of miles long from desalination plants on the coast and treating wastewater that is conventional held in tailings ponds. Wastewater treatment technologies can recover saleable metal that might otherwise be lost and prevent environmental contamination from highly acidic ...
By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.
-
Aqua Assist for Wastewater Treatment Facilities
Our product Aqua Assist is tailored to boost your wastewater treatment process to achieve optimum performance while delivering significant cost savings, increased process capacity and reliable operations without capital investments. From domestic and industrial wastewater treatment to sludge ponds, our solution improves the treatment of wastewater wherever in the world they may ...
By Drylet, Inc. based in Houston, TEXAS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you