Conventional Wastewater Treatment (Wastewater Treatment) Equipment Near Arkansas
-
PremiumManufactured by BioMicrobics, Incbased in USA
The BioBarrier is a wastewater treatment system that uses a Membrane Bioreactor (MBR). This technology removes organic pollutants and suspended solids with the use of ultrafiltration membranes. The membrane system replaces the clarifier, sand filter, and disinfection processes used in many conventional wastewater ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
The complete mechanical pre-treatment of wastewater in a municipal or industrial sewage treatment plant, in the form of a single compact headworks in tank design. The Noggerath® Combined Unit TOP replaces the entire headworks of a conventional wastewater treatment plant and includes fine ...
-
Manufactured by Fluence Corporationbased in USA
Upgrade Wastewater Treatment Plants with SUBRE; With increased urbanization, wastewater resource recovery facilities face new challenges. When a conventional activated sludge wastewater treatment facility has reached its limit, Fluence's SUBRE can come to the rescue. Instead of enlarging current ...
-
Manufactured by Orthos Liquid Systems, Inc.based in USA
The Centurion monolithic underdrain delivers to utilities their demands of resiliency, reliability, and permanency with a life cycle cost that cannot be beaten. Our robust, yet flexible, design provides an optimal solution for conventional water treatment, wastewater tertiary filtration, biologically active filtration, GAC adsorption and ...
-
Manufactured by A3-USA, Inc.based in USA
A3-USA designs and manufactures membrane bioreactor (MBR), sequencing batch reactor (SBR), and conventional activated sludge (CAS) wastewater treatment plants. We are the only MBR plant integrator who manufactures the complete plant, including the membrane modules. phosphorous removal, and carbon addition for a secondary anoxic basin. ...
-
based in CANADA
during installation and start-up. MBR (Membrane Bioreactors) is a biological process that combines secondary and tertiary treatment using a membrane filtration process. Comparing with conventional wastewater treatment plants, MBR technology processing water have low turbidity, low bacterial counts, low TSS and NTU, and low ...
-
Manufactured by Kontek Process Water Managementbased in CANADA
DAF is a suitable process when the oil or grease is less dense than water or has neutral buoyancy. Millions of micro-scale bubbles, referred to as “whitewater”, float upwards from the bottom of the tank. Little clumps of the oil or grease, commonly called “flocs”, are pushed to the surface as the micro-bubbles rise. The floating contaminants are mechanically skimmed away, ...
-
Manufactured by Kontek Process Water Managementbased in CANADA
ClayTek powder reactant treatment systems are broad ranging, non-discriminating and flexible. They are ideal for treating low volume, mixed wastewater from a wide variety of sources, including: mop water, wet vac, wash water, and wastewater that contain emulsified oils, coolants, grease, and more. Guarantee environmental compliance while ...
-
Manufactured by Kontek Process Water Managementbased in CANADA
Designed to automatically treat large batch volumes with different wastewater constituents. Treatments contain pre-programmed chemical recipes designed to guarantee that each of your different wastewater sources will receive its specific treatment formula to consistently meet discharge compliance ...
-
Manufactured by Kontek Process Water Managementbased in CANADA
The 1300 is ideal for Greenfield sites and facilities with more floor space and larger entrances. Kontek’s sophisticated continuous precipitation processes are calibrated to deliver optimal results in industrial settings. Efficiently treat your wastewater prior to re-use or safe environmental discharge with durable and long-lasting ...
-
Manufactured by H2Flow Equipment Inc.based in CANADA
The TILT treatment plants are an innovative, radical departure from conventional wastewater treatment plants. Not only do they utilize modular ISO containers as the basis for the treatment plant, but H2FLOW has revolutionized the industry by tilting the containers onto their side, hereby maximizing oxygen ...
-
Manufactured by H2Flow Equipment Inc.based in CANADA
The HILT treatment plants are an innovative, radical departure from conventional wastewater treatment plants. They utilize modular ISO containers as the basis for the treatment plant. HILT MBBR - Moving Bed Bio Reactor: The HILT MBBR is an incredible combination of technology and efficiency. The HILT MBBR system ...
-
Manufactured by Premier Tech Water and Environmentbased in CANADA
Conventional wastewater treatment systems are ageing throughout communities and municipalities and will need to be replaced sooner or later. In parallel, community and commercial development in ecological sensitive areas requires a solution that is adapted to modern lifestyles. Rotofix combines reliability and durability with low system ...
-
Manufactured by Samesa Groupbased in SPAIN
Our experience and level of specialisation allows us to achieve the best analytic values with secondary treatments in conventional wastewater treatment; however, the capacity of the treatment plant to assimilate specific concentration or flow variations must be guaranteed in many ...
-
Manufactured by Hidroambientebased in SPAIN
Our designs range from conventional Wastewater Treatment Plants (WWTPs) to more innovative layouts including SBR, MBR or EDR technologies. We boast many re-vamping references in large WWTPs through the integration of thermal sludge drying systems, large mechanical dewatering processes, auxiliary cogeneration plants, tertiary ...
-
Manufactured by ENVI-PUR, s.r.o.based in CZECH REPUBLIC
A membrane bioreactor (MBR) WWTP combines conventional biological wastewater treatment with membrane technologies. Separation of activated sludge in conventional wastewater treatment plants takes place in settling tanks. This method of separation therefore has its limits in the quality of ...
-
Manufactured by nrw Anlagentechnik GmbHbased in GERMANY
Conventional municipal or industrial wastewater treatment plant, contaminant removal and to protect downstream equipment.Opening 2.0 mm – 4.0 ...
-
Manufactured by Membion GmbHbased in GERMANY
Membrane wastewater treatment plants (MBR) deliver a water quality thousands of times better from a microbial point of view compared to conventional wastewater treatment plants – with a significantly smaller footprint for the overall ...
-
Manufactured by Rotaria Energy and Environmental Engineering GmbHbased in GERMANY
. The CycloSort is a good addition or alternative to conventional sand traps on wastewater treatment plants. With the CycloSort a high degree of sand separation and sand washing in the smallest space is possible. Due to the compact design, the system can also be integrated into existing ...
-
Manufactured by Hofstetter Gastechnik AGbased in SWITZERLAND
Protect the integrity of your ground water. Landfill leachate belongs to the most harmful industrial waste waters. It has particularly high salt, heavy metal and non-biodegradable contents which cannot be sufficiently reduced by conventional wastewater treatment plants and require special ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you