Wastewater Treatment Equipment With Industrial Applications For Water And Wastewater Near Arkansas
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The Hydroflux GT is a unique product that will remove grease, oils and solids from commercial kitchen wastewater to allow discharge of the wastewater to sewer. It offers a lower footprint than traditional DAF systems and utilises almost half the ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The AEROSTRIP Fine Bubble Membrane Diffuser is a strip diffuser, for use in continuous and intermittent biological processes. AEROSTRIP Diffusers by AquaConsult of Austria have been in operation since the early 1990’s and are providing significant benefits to numerous wastewater treatment plants with over 2000 installation worldwide including many industrial and municipal plants throughout ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The HyDAF Dissolved Air Flotation (DAF) system’s simplicity and exceptional performance in industrial applications are just two of the reasons why the HyDAF is the Dissolved Air Flotation system of choice for primary industrial wastewater treatment ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Anaerobic treatment of wastewater is a biological method characterised by the production of methane (CH4) which when further treated can significantly supplement your factory power requirements. Anaerobic processes are ideal for industrial wastewater with high COD and BOD loads and can usually achieve over 80% reduction whilst generating very little sludge and consuming comparatively low levels ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
MENA Water is an engineering and manufacturing company specialising in the field of containerised complete Water and Wastewater treatment systems that offer the advantages of rapid deployment, significant cost savings whilst not compromising on quality, through innovative ready made ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Anaerobic treatment of wastewater is a biological method characterised by the production of methane (CH4) which when further treated can significantly supplement your factory power requirements. Anaerobic processes are ideal for industrial wastewater with high COD and BOD loads and can usually achieve over 80% reduction whilst generating very little sludge and consuming comparatively low levels ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Hydroflux HySmart Sequencing Batch Reactor. SBR’s are renowned as being one of the most robust and reliable biological systems available for Industrial wastewater treatment including: Minimal Footprint. No Clarifier Required. Ability to Cope with Shock Loadings. No Sludge Recycling Necessary. Biological Nutrient Removal (BN.R) ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The HiFlowTM lamella separator is a high rate solids separation process that has 1/10th of the physical footprint as compared to conventional circular clarifiers. It is used in a number of industrial wastewater applications such as anodisers, glass factories, tunnel construction, groundwater treatment, galvanizing plants, general industrial manufacture, steel, precious metal and mining and as a ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The HeadMax hydraulic suction system is designed for sludge removal in activated sludge treatment with partial or complete nitrification processes. It allows for the construction of a flat floor which saves on civil costs associated with the clarifier ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The Hydroflux HyPURE range of brackish water reverse osmosis systems’high efficiency, low energy design and exceptional performance in industrial applications are just some of the reasons why these systems are so popular for industrial water and wastewater ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Currently, less than 1% of all water found on our plant is suitable for human consumption. Through reverse osmosis, humanity have been able secure suitable water for drinking and also for industrial processes from the vast volumes of seawater and brackish groundwater. Hydroflux are a global leader in the supply of seawater desalination ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Removing water from the tunnel sounds simple enough. However, within the tunnel the problem becomes the solids within the water rather than the water ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The use of the correct chemicals and chemical doing equipment is essential to the effective operation of your water or wastewater treatment ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
A Filter Press is most commonly used to dewater sludge generated from industrial wastewater treatment plants. The Hydroflux chamber filter press is a batch system and is ideally suited to small to medium volumes of sludge. One of the key benefits to the filter press is the dry solids concentration that is unmatched by other dewatering ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The CoverSweep launder covers eliminate problems associated with excess algal growth in clarifier launders. The CoverSweep system is a series of interlocking fibreglass or stainless steel hatches allowing access to the entire trough if required, yet all the while blocking 100% of sunlight across the launder trough, effluent weirs and scum baffle. The major benefit of CoverSweep launder covers is ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Hydroflux Industrial not only supply dewatering equipment such as Belt Presses, Screw Presses, Filter Presses and Centrifuges but we have the skills and experience to design and construct an entire dewatering plant. In order to effectively manage and dewater sludge generated form industrial wastewater processes, a number of steps are required. Firstly the sludge must be stored in a suitable ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
A Belt Filter Press is used for industrial wastewater treatment plant sludge dewatering. The belt press often proves to be one of the most cost effective dewatering options and has an advantage of incorporating an integrated thickening process to allow dewatering of very dilute slurries to form a spadable ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Over the past decade, management of contamination in groundwater and surface water supplies has been growing in importance around the globe. Communities are reliant on the quality of these water supplies for drinking water, for irrigation and for industrial uses. Historically, management of ground and surface water for complex contaminents such as organics was challenging and often expensive. ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
One of the significant benefits of FlooBed® MBBR technology for industrial wastewater treatment is that it can be designed for partial or full removal of organics. This is particularly favourable in trade waste or sewer discharge applications where discharge limits for BOD cannot be achieved by primary treatment ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The CleanSweep roller brush combats the Algae problem in clarifier launders head on. The CleanSweep approach divides the launder trough in to five zones with a dedicated roller constantly cleaning each zone. Combining a unique bristle design with a retarding rotational force acting directly on algal growth, Hydroflux Epco have designed a system that keeps operators out of the trough, reduces the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you