Wastewater Treatment Software For Water And Wastewater Available In Laos
-
Showcasebased in CANADA
SIMBA#water is a process simulator for modeling, simulation, optimization, and management of wastewater treatment plants and beyond. It provides process simulation capabilities for sewers, wastewater treatment plants, and ...
-
Premiumbased in GERMANY
AQUA DESIGNER is a WWTP software tool for designing the various processes of a wastewater treatment plant, from mechanical treatment to biology and sludge treatment. All common process variants are available for selection with regard to the calculation basis, the process and the design. Planning is supported by many auxiliary functions. As a result, AQUA DESIGNER provides comprehensive ...
-
Premiumbased in USA
Visual Water Designer is an all purpose water software tool providing users with many of the calculations encountered in water and wastewater design and analysis. Visual Water Designer offers a hydraulic analysis section that focuses on hydraulics and pumping system analysis and a section that covers process calculations for almost all of the various treatment processes encountered in ...
-
Premiumbased in CANADA
The current version 5.0 of SIMBA# brings many improvements in the user interface and in the numerical properties of the simulation kernel but above all many model extensions. The most important changes are listed in the release notes. As a highlight we would like to mention here the implementation of the DWA volume T4/2016 "Design of sewage treatment plants in warm and cold climate zones" in the ...
-
Premiumbased in GERMANY
The aeration system is the most important equipment of a wastewater plant. 75% of the energy used for the wastewater treatment is covered by the aeration system. The correct design of the aeration system is the basis for a good operation and the operational costs. As the energy costs are the main cost value of an aeration system, a real comparison of different systems must concern both the ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
AERZEN has the best machine technologies for the job, with Blower, Hybrid and Turbo. AERsmart, the new intelligent machine control, raises their performance even further. AERsmart distributes air flows optimally between the various technologies and their individual efficiency levels. End result: standalone efficiency levels close to the theoretical maximum. Additional savings of up to 15%. ...
-
Premiumbased in USA
Visual Hydraulics is a state of the art, flexible modeling tool. It is used primarily for modeling the hydraulic characteristics of water and wastewater treatment plants, and is capable of analyzing entire hydraulic profiles. The software follows the traditional method for analyzing water surface profiles: a downstream control point is selected, and the hydraulic profile is then determined ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The NIVUS Web Portal is a comprehensive data management system for storage and provision of measured data. Thanks to storage on the web portal there are versatile options available to analyse readings, for system verification, data forwarding and alerting up to the creation of complete ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The level of automation which is brought to Ovivo water treatment systems delivered to customer site allows us to slowly be prepared for the next largest industry change which is Industry 4.0. Most of our systems are connected to long term data storage archives and they collect thousands of process data's which can be utilized for plant optimization and predictive ...
-
by Intelligenbased in USA
EnviroPro Designer is a subset of SuperPro Designer that facilitates modeling, design and optimization of water purification, wastewater treatment and air pollution control processes. EnviroPro Designer is a valuable tool for environmental consulting engineers, process designers, and treatment/disposal plant engineers and managers. It provides under a single umbrella modeling of end-of-pipe ...
-
by Geokon A/Sbased in DENMARK
Recent PPC regulations have substantially increased the burden placed upon local authorities to not only ensure that industrial pollution is reduced, but also to demonstrate that they are implementing the regulations in a transparent and cost-effective ...
-
Manufactured by China National Materials Industry Import & Export Corporationbased in CHINA
We are the biggest manufacturer in China to produce Poly Propylene (PP)hollow fiber UF membrane. Although there are many kinds of membrane in market, but our membrane is top on them with high quality and cost-effective. Our membrane fully remove bacteria, ss, E.coli, macromolecule organics. So it is always used as good pretreatment of RO, and surface water, grond water and after biological ...
-
based in USA
TotalWATER AI for Climate Action: Decarbonizing Water Resource Recovery Facilities. Book your 1:1 N2O impact session and demo to learn about how you can take advantage of our early climate impact pricing and start reducing N2O emissions ...
-
Manufactured by QED Environmental Systemsbased in USA
GAM software for the GA5000, GEM5000 and BIOGAS 5000 portable products enables users to maximise the operation of their gas analyser. It features a simple upload and download facility and is fully compatible with the latest Microsoft™ operating ...
-
based in USA
Solves operational problems and achieves energy savings of up to 25 percent by selecting optimum DO and SRT targets. OPTImaster automatically selects DO and SRT targets, solves operational problems, and achieves energy savings of up to 25 percent. OPTImaster is a software program, which provides daily recommendations for sludge age (SRT), mixed liquor total suspended solids (MLSS) concentration, ...
-
based in CANADA
Managing wastewater data from a variety of different sources and formats is a challenge that utilities, agencies, and industries face. ...
-
by Accuviobased in UNITED KINGDOM
Water, and water treatment reporting is becoming more important as organisations broaden the scope of their Environmental Management practices. Good reporting is just as important as for fossil ...
-
Manufactured by Berghof Membranes Technology (BMT)based in NETHERLANDS
As manufacturing industries grow to meet the demand of an ever-increasing population, the need for quality process water used in manufacturing processes and the high volume wastewater/effluent resulting from these processes have led companies to invest in more efficient wastewater treatment ...
-
based in CANADA
CANWETTM (v 4.2) is a GIS-based software suite designed to inform decision making around river basin and watershed management; water supply and wastewater treatment infrastructure; food security; and, climate change adaptation. Its ability to quickly estimate daily water balance, nutrient, erosion sediment, and bacteria loadings from GIS input data allows CANWETTM to serve as a powerful decision ...
-
based in CANADA
Paper-based reporting is becoming a thing of the past. WaterTrax offers a full spectrum of water compliance reporting that cover everything from utilities submitting reports to their state/province/federal regulator, to permitted industries reporting to utilities. As regulations change, WaterTrax is working with utilities and regulators to develop electronic reporting tools to help report ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you