Water Aeration Applications

36 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Aeration ×

Nitrogen generation for the Marine, Oil & Gas industry

by Oxymat A/S     based in Helsinge, DENMARK

Marine conditions pose a number of challenges and issues. Size, weight, rough sea conditions, corrosion, high temperatures, cargo needing protection, just to name a few.Oxymat’s Marine, Oil & Gas division produces nitrogen PSA generator systems to the marine industry with the necessary experience and know-how to address these issues. Compared to a traditional membrane based system, PSA systems significantly decrease redundancy and can cut energy consumption with up to 30%. In addition, a PSA system can produce 5% or lower oxygen levels.With the highest quality in components, PSA systems are extremely reliable with at least 48.000 running hours before CMS replacement is needed.

BREEAM Air Quality

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

The sustainability and environmental impact of a new build house is typically assessed using BREEAM. Part of the BREEAM assessment method is determining the air quality inside the house. Gradko can supply a range of products for qualified BREEAM assessors. We try to work with qualified BREEAM assessors to determine and meet their requirements. The products we normally supply are used for monitoring formaldehye and VOC levels in new build properties.

Air control for wastewater treatment aeration

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

Waste water monitoring solutions for wastewater treatment industry

by Pollution & Process Monitoring Ltd     based in Sevenoaks, UNITED KINGDOM

Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

Final effluent monitoring for wastewater treatment industry

by Pollution & Process Monitoring Ltd     based in Sevenoaks, UNITED KINGDOM

Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent monitoring and perform water analysis for key consent parameters.

Municipal wastewater solutions for biological treatment industry

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

A well-designed wastewater plant starts with your effluent requirements and an energy-efficient biological process. WesTech has multiple biological process options to match your application and preference. From trickling filters to oxidation ditches, WesTech`s biological process equipment will give you the effluent quality you need and the foundation for a successful wastewater plant.

Oxygen Generating Systems for Sewage Treatment

by Oxygen Generating Systems Intl. (OGSI)     based in North Tonawanda, NEW YORK (USA)

Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries

by Oxygen Generating Systems Intl. (OGSI)     based in North Tonawanda, NEW YORK (USA)

Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.

Water Storage for the Wastewater Industry

by Superior Tank Co., Inc.     based in Rancho Cucamonga, CALIFORNIA (USA)

Liquid waste discharged by domestic residences, commercial properties, industry, and/or agriculture. Superior Tank Co., Inc. offers a wide range of products such as Open Tops, Aeration and Trickling Filter tanks. Our engineers can create a wastewater bolted or welded steel storage tank system that will best suit your needs. We are able to package and ship our bolted and welded steel storage tanks internationally.

Wastewater Treament for Distilleries

by B & V Water Treatment     based in Daventry, UNITED KINGDOM

B & V Effluent Services have been successfully helping brewers and distillers throughout the UK with the management of their effluent systems for nearly 30 years. As a result the B & V Effluent Team holds a vast amount of specialist knowledge in regards to the problems faced within the alcohol industry including Copper Removal from discharge water and the management and reduction of pollutant levels in general to meet discharge limits.

Oxygen generation for ozone industry

by Oxymat A/S     based in Helsinge, DENMARK

Ozone is a highly effective method for bacteriological treatment and useful in a variety of everyday situations from removing odor to ensuring clean, high quality drinking water from the tap. But O3 is more than just effective. It is also environmentally safe, which makes it highly suitable for treating water in enormous quantities; both drinking water and industrial waste water, i.e. in industrial slaughterhouses.

Root and Leafy Vegetable Processing Line

by Amisy Machinery     based in Zhengzhou, CHINA

We are devoted to designing and manufacturing turnkey projects for processing various root vegetables and leafy vegetables. The vegetable processing line can be customized according to the process requirement, vegetable types, handling capacity, workshop area, designed equipment varieties and specifications. Engineers are available for on site installation, commissioning and training. Link: http://vegetable-machine.com/project/vegetables-cleaning-processing-line.html Email: info@amisymachine.com

Environmental technology for water treatment industry

by Körting Hannover AG     based in Hannover, GERMANY

In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification.  Further applications are: Diluting and conveying acids and lye during the process of regenerating ion exchangers.

EPR waste minimisation monitoring for wastewater treatment industry

by Pollution & Process Monitoring Ltd     based in Sevenoaks, UNITED KINGDOM

The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

Industrial and commercial water filtration for canal/river/sea water filtration

by Hydro-Gen Engineering Ltd     based in Widnes, UNITED KINGDOM

When considering filtration methods, many industries use alternative water sources such as river, borehole, canal or sea-water extraction as a low cost solution for cooling water and various other operations on-site. Although water extraction is a low cost option the water can be of low quality and can cause problems and damage to the system, meaning more resources, time and expense in fixing the problem.

Industrial and commercial water filtration for bore-hole intake

by Hydro-Gen Engineering Ltd     based in Widnes, UNITED KINGDOM

When considering filtration methods, many industries use alternative water sources such as river, borehole, canal or sea-water extraction as a low cost solution for cooling water and various other operations on-site. Although water extraction is a low cost option the water can be of low quality and can cause problems and damage to the system, meaning more resources, time and expense in fixing the problem.

Odor control

by Geomembrane Technologies Inc. (GTI)     based in Fredericton, NEW BRUNSWICK (CANADA)

Reducing odors is the most common reason clients select GTI covers. Our variety of cover options help industrial food and beverage processors contain odors from primary clarifiers, aeration basins, equalization tanks, and digesters by covering the exposed surfaces.

Enhanced Biosolids and Bio Sludge Dewatering with Wilsa EWC

by Hudson Industries     based in Vienna, OHIO (USA)

IMPROVED BIOSOLIDS/ BIO SLUDGE DEWATERING WITH WILSA® CONDITIONING The WILSA ElectroWave™ effect can be used to condition polar fluids to alter their physical properties, improving several chemical and physical processes. - Reducing surface tension to improve the ability of water to repel solids - break physical / chemical emulsions - Increasing the contact angle of water - improve coalescing of solid particulate toaccelerate phase separation - Lowering the viscosity of water - reduce friction of flocculated solids dropping through less viscous water - Lower viscosity, reduced surface tension and increased contact angle of water - improve aeration of wastewater Installation of WILSA® ElectroWave Conditioner upstream of a belt press at a wastewater treatment plant resulted in polymer usage dropping by >50% while achieving much dryer solids.

Hose pumps for copper mining industry

by Albin Pump SAS     based in Goteborg, SWEDEN

Copper tailings - slurry is very abrasive. Centrifugal pumps with soft packing shaft seals had to be water-flushed to limit wear on the shaft sleeve. Fine until winter froze the water. Solution: a Albin Pump ALHX80, with no seals to wear out. Tailings could be continuously pumped at higher concentrations!, doubling plant efficiency. Downtime: a few minutes every 2,000 hours to change the tube.

Need help finding the right suppliers?

Let the XPRTs do the work for you