disc aerator Equipment

78 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Aeration ×

  • Keyword: disc aerator ×

Disc Aerator

by IFO Vattenrening, AB     based in Bromma, SWEDEN

The rubber membrane in IFO´s aerators is fitted with a large number of very small slits. Under working pressure, the rubber membrane expands thereby opening the slits and allowing the air quantity necessary for effective oxygenation to pass through. The smaller the holes the smaller the air bubbles and the better the oxygenationcapacity. ...

Fine Bubble Membrane Disc Aeration System

by Gasvoda & Associates, Inc. (GAI)     based in Calumet City, ILLINOIS (USA)

The Aquarius fine pore aeration system has been developed by our team of engineers with an unparalleled background of experience in the design, application and operation of wastewater treatment aeration systems.  This experience comes with the knowledge that a high performance diffuser requires an equally well engineered piping system to ...

Europelec - Model DISC AIR - Average Bubble Air Diffuser

by EUROPELEC     based in Paris, FRANCE

Treat your greases and aerate your tanks with the DISC'AIR. The EUROPELEC DISC’AIR medium bubble air diffuser has a simple design. It is made of high-performance materials that offer full resistance to corrosion.

Fine Bubble Ceramic Disc Aeration System

by Aquarius Technologies Inc.     based in Port Washington, WISCONSIN (USA)

The Aquarius Fine Bubble Ceramic Disc Aeration System has been developed by our team of engineers with an unparalleled background of experience in the design, application and operation of wastewater treatment aeration systems. This experience comes with the knowledge that a high performance diffuser requires an equally well engineered piping ...

Disc Membrane Aerator

by U&D Environmental Technology Co.,Ltd     based in Guangzhou, CHINA

Membrane: EPDM 3/4'. Diameter: 270mm(Standard 10'). Aerator surface area: 0.0531 m2. Bubble diameter:0.8-1.9mm. Membrane service life: Above 5 years. Standard aeration rate: 4 m3/h. Aeration scope: 1-8 m3/h. Standard oxygen transfer efficiency: ≥38% (6m water depth). Working area: 0.2-1.0 m2/pcs

STM-Aerotor - Biological Nutrient Removal (BNR) System

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

The STM-Aerotor™ Biological Nutrient Removal (BNR) System uses Integrated Fixed Film and Activated Sludge (IFAS) technology as part of a process that provides biological nutrient removal for municipal and industrial wastewater treatment.

Model SSI - Fine Bubble Disc Diffusers

by Entec International B.V     based in POORTUGAAL, NETHERLANDS

SSI manufactures disc diffusers with compression molded membranes. Standard materials are EPDM (pictured at right) and fluoroelastomer layered EPDM. Compression molding ensures a diffuser with even specific gravity and uniform tear resistance. The tear resistance of a compression molded part is multidirectional, which is typically not found in ...

Nafad - Fine Bubble Dilfusers

by Sanitherm, a Division of Peak Energy Services     based in Coquitlam, BRITISH COLUMBIA (CANADA)

Fine bubble dilfusers are mostly used in water re-oxygenation and biological wastewater treatment systems. Particularly, the membrane type tine bubble diffusers are popular because of their low maintenance, non-clogging, and high oxygen transfer efficiency. The fine bubble membranes are slit (1-2 mm) with pattern in order to maximize their ...

Land Pride - Model CA0540 - Core Aerator

by Stewart Martin Equipment     based in Okmulgee, OKLAHOMA (USA)

The CA05 Series Pull-Type Core Aerators are perfect for garden tractors, zero turn mowers and utility vehicles to relieve soil compaction, and allow air circulation in grassy surfaces. They are designed for residential use and other light applications. They utilize replaceable hardened spring steel spoons mounted on rotating discs. These spoons ...

Gandy - Turf Aerators

by General Implement Distributors     based in Salt Lake City, UTAH (USA)

Gaudy offers aerators with cither 3 4' coring spoons or with slicing knives, and in a choice of 34',4. 5.6&8-ft. widths. Independent action of the dual-wheel coring sections or arms is common to all of the models. The larger models feature spoons or knives on paired disks rotating independently, each pair having its own grease lilting to ...

Disc Membrane Diffusers

by FLI Water Limited     based in Kempston, UNITED KINGDOM

FLI Water are acknowledged as a leader in developing innovative new water treatment processes and quality products which have been extensively developed and tested. The FLI Water BrightwaterTM B220 range of high efficiency fine bubble diffusers include rubber membrane and ceramic, which along with

ENVICON - Model Type EMS - Membrane Disc Diffuser

by ENVICON GmbH & Co. KG     based in Dinslaken, GERMANY

ENVICON membrane diffusors are high-quality products. In the manufacture of ENVICON diffusors, special attention is devoted to the quality of the EPDM membrane because it is a decisive factor for both the life and the economics of aeration systems.

ABS - Nopon Disc Diffuser System

by Sulzer     based in Winterthur, SWITZERLAND

The reliable ABS Nopon disk diffuser system is one of the world’s most widely-installed fine-bubble aeration systems, available in five alternative diffuser models. Preassembled diffuser elements enable fast and easy installation. Retrofits are available to increase aeration efficiency.

Zenit - Model OXYPLATE 9-12 - Disc-Shaped Air Diffusers

by Zenit Europe S.A.     based in Bascharage, LUXEMBOURG

Disc-shaped diffusers having elastomer membrane with tiny holes for application in water treatment processes in reactors with continuous or intermittent aeration, especially recommended for high-efficiency permanent installations. The quality, design and membrane hole size ensure unbeatable efficiency in terms of the ideal oxygen transfer-pressure ...

Envotech - Aeration Systems and Disc Diffuser

by ENVOTECH LTD     based in Plovdiv, BULGARIA

Oxygen supply and aeration systems are both critical and qualifying points of any civil or industrial aerobic biological waste water treatment.The reliability and the performances of an aeration system are decisive factors affecting the choice and design of the system itself since, for instance, in an activated sludge waste water treatment plant ...

Fine Bubble Diffuser Holder-Membrane Disc

by Aquarius Technologies Inc.     based in Port Washington, WISCONSIN (USA)

The Aquarius membrane disc diffuser holder offers several advantages over alternate designs.  The membrane fine bubble diffuser is mounted in a holder that is sonic and solvent welded in the factory to the crown of the air distribution header.  This sonic and solvent welded bond is actually stronger than the pipe material itself, which ...

DDI SuperFlex - Saddle Mount

by Dorian Drake International     based in White Plains, NEW YORK (USA)

Disc diffusers are constructed of glass-filled UV polypropylene and are suitable for deep tank (high-temperature) applications, as well as robust performance in cold weather. Available for pipe size diameters of 3-inch (91mm), 4-inch diameter (110 mm) for the 9-inch unit only. The 12-inch disc is only available in 3-inch diameter pipe ...

DDI SuperFlex - Threaded Flexible Membrane Fine Bubble Disc Diffuser

by Dorian Drake International     based in White Plains, NEW YORK (USA)

SuperFlex disc diffuser units are available with premium quality EPDM membranes. The diffusers incorporate an external triple-check valve design to prevent intrusion of liquid or solids into the diffuser or air piping under normal on/off operating conditions.

DDI SuperFlex - Model T-Series - Tube Type Diffuser Unit

by Dorian Drake International     based in White Plains, NEW YORK (USA)

The Tube type diffuser unit is a fine pore, flexible membrane diffuser capable of providing a high level of oxygen transfer efficiency with maximum mixing capability. Standard configuration includes 3/4-inch stainless steel nipple installed. The stainless steel nipple can also be shipped loose, or a thru- mount connection can ...

DDI SuperFlex - Universal Diffuser Mount (UDM)

by Dorian Drake International     based in White Plains, NEW YORK (USA)

The Universal Diffuser Mount (UDM) for fine bubble or coarse bubble disc diffusers is designed to accept a 3/4-inch NPT diffuser connection. The UDM is engineered for use with 2.4-inch through 8.6-inch O.D. plastic (PVC) or metal pipe. UDM is available in both vinyl & rubber materials of construction. Vinyl UDM (illustrated in ...

Related Terms for disc aerator

Need help finding the right suppliers?

Let the XPRTs do the work for you