Fine Bubble Aeration (Water Aeration) Equipment
-
Manufactured by ELIQUO HYDROKbased in UNITED KINGDOM
Fine bubble aeration is a simple process, but one that consumes 0.481% of the total power generated within the United Kingdom. Therefore any efficiencies that can be found to reduce this demand make sound commercial and environmental sense. ELIQUO HYDROK can provide significant reductions in energy consumption, along with reduced whole life ...
-
Manufactured by Centex Fluid Products LLC ibased in USA
Fine bubble aeration is a subsurface form of diffusion in which air is introduced in the form of very small bubbles in order to enhance the treatment process of wastewater. Air flows through a pipe into diffusers located at the bottom of a tank. These air diffusers have numerous small openings, known as pores, which enable air ...
-
Manufactured by Aquatec-Maxcon Pty Ltdbased in AUSTRALIA
Aquatec Maxcon was responsible for the introduction of membrane type fine bubble aeration diffusers to Australia in 1986. The initial membrane diffusers supplied were of German origin with a hollow tubular construction with an extruded EPDM ...
-
Manufactured by Entec International BVbased in NETHERLANDS
Strongest membrane - Smallest bubble. Optimal aeration with the Entec aeration discs. ENTEC® fine bubble aeration discs consist of an EPDM membrane and a polypropylene housing. Due to their constant development, the ENTEC® aeration membranes have an excellent efficiency ...
-
Manufactured by Nexombased in CANADA
Fine bubble diffuser systems are a key component in controlling operational economics of a wastewater treatment plant. EDI's fine bubble diffuser platforms offer maximum performance and application flexibility for system ...
-
based in IRELAND
Glan Agua Ltd. have designed, installed, commissioned and operated and maintained numerous aeration systems for wastewater applications. Fine bubble Aeration systems; Fine bubble aeration systems involved a grid of disc like membranes which allow fine ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
FlexAir Basic conforms to the most common aeration specification with a quality, American-made (or UK-made) product. If your specification calls for a solvent-welded, disc diffuser-based system, you need to meet FlexAir Basic. Designed and built by EDI’s aeration engineers to meet the requirements of this common spec, FlexAir Basic is a ...
-
Manufactured by PB Equipmentbased in USA
Our exclusive Bosman Fine Bubble Aerators in activated sludge wastewater treatment have unquestionable advantages over course and medium bubble aeration regarding oxygen transfer efficiency and lower power consumption. The Plate Aerators also have an outstanding life expectancy and easy ...
-
Manufactured by Environmental Group Southwest (EGSW)based in USA
Superior, fine-bubble, aerator mixing unit with Micro-Solve® will bust through and devour solid grease. The Bubbler Mixer and Aeration System adds oxygen to the septic environment and mixes Micro-Solve® with the ...
-
Manufactured by Air Diffusion Systems (ADS)based in USA
ADS’ fine bubble aeration diffusers and can be easily installed in new or existing above or below ground storage tanks looking for added oxygenation or ...
-
Manufactured by Air Diffusion Systems (ADS)based in USA
Trusted for over 60 years, Air Diffusion Systems’ fine bubble aeration systems can reduce BOD, TSS, nitrogen, and phosphorus levels to single-digit concentrations at domestic & industrial wastewater treatment ...
-
Manufactured by WTR Solutionbased in USA
The WTR Solutions Fine Bubble Diffusion Technology Aerator Model 12 is sized for large animal confinement operations, municipal sewage processing plants and large industrial applications. This unit has a floatation platform available as an ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the ...
-
Manufactured by Aerator Solutionsbased in USA
The Gold Frog (GF) utilizes a patented fine bubble impingement aeration system. The impingement aeration system is used for clarification due to its unique ability to oxidize soluble BOD, lower the specific gravity of surface water, sink insoluble BOD, and digest organic sludge in situ. The Gold Frog System requires an engineered ...
-
Manufactured by Nexombased in CANADA
is using a lot of power to little effect. Upgrade existing aeration with fine bubble aeration to reduce energy requirements. Stop odors and sludge build-up: Nuisance odors spell trouble for a town’s aromatic aesthetic, while manual sludge removal spell trouble for its pocketbook. Save space, time, and money: You'd like to ...
-
Manufactured by Beihai Kaite Chemical Packing Co., Ltd.based in CHINA
) or silicone rubber, and are available with fine or coarse-bubble perforation, which makes the diaphragm anti-aging, corrosion-resisting and long service life, as long as 5-8 years. The aerating hole is evenly formed, leading to good expandability and instant closing. During aerating work, the fine ...
-
Manufactured by Shanghai Dubhe Environmental Protection&Technology Co.,Ltdbased in CHINA
The Fine Bubble Disc Diffuser is designed with superior performance and long-term reliability in mind. It is made of high-quality EPDM material for durability and good air diffusion. Its disc shape allows for uniform bubbles, and its 3500 holes ensure maximum air output with a SOTE of 22-59%. The air consumption rate is 0.2-0.6m3/min, ...
-
Manufactured by Aquarius Technologies, LLCbased in USA
A customer's decision to monitor or incorporate a cleaning system into a fine bubble aeration system is a worthwhile investment for maintaining peak performance and extending the life of the system.The following benefits result when one or both are incorporated: Savings on Maintenance Costs, Reduced Operating Cost by Maintaining ...
-
Manufactured by Aquarius Technologies, LLCbased in USA
maintaining consistent oxygen transfer efficiency. The same effective integral check valve utilized on the Standard Membrane Disc Diffuser prevents back-flow and is a great choice for intermittent operation. The EPDM Low Pressure Disc Diffuser is suitable for heavy solids, aerated mixing, and industrial applications requiring high air flow rates and ...
-
Manufactured by Aquarius Technologies, LLCbased in USA
, ensuring uniform air bubble distribution over the entire diffuser compared to flat ceramic diffusers. The positive seal created by the compression of the O-ring seat prevents short circuiting near the retainer ring and minimizes diffuser fouling. To maintain peak efficiency clean in place monitoring and cleaning systems are available. The Ceramic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you