Mechanical Aeration (Water Aeration) Equipment Near Arizona
-
Manufactured by Aqua-Aerobic Systems, Inc. - a subsidiary of the METAWATER Groupbased in USA
The Aqua MixAir system provides separate mixing with the AquaDDM Direct Drive Mixer and an aeration source such as the Aqua-Jet surface aerator or Aqua-Aerobic diffused aeration. The system has the capability to cyclically operate aeration and mixing to promote anoxic/aerobic and anaerobic environments with low energy ...
-
Manufactured by Aqua-Aerobic Systems, Inc. - a subsidiary of the METAWATER Groupbased in USA
The Aqua-Jet surface mechanical aerator may possibly be the most imitated waste water aerator in the world. But, as with other manufactured products, copies never equal the original in terms of reliability and ...
-
Manufactured by Aqua-Aerobic Systems, Inc. - a subsidiary of the METAWATER Groupbased in USA
to provide aeration for efficient BOD removal and nitrification. A cloth media drum filter follows the RBC to collect and remove the biological solids prior to the effluent discharge. This cloth media filter eliminates the need for a secondary clarifier. The Aqua BioMax system is an ideal solution for low flow applications (up to 100,000 gpd) ...
-
Manufactured by USA Sludgebased in USA
USA Sludge’s high tech solar sludge drying creates a much smaller solar footprint, as our system uses solar electric panels that we install at the site of the dryer, which reduces installation costs and increases efficiency. The closed cabinet dryer with a low temperature heat pump requires less electricity to operate because the heat pump cycle utilizes all of the waste heat to dry the ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
The HYPERCLASSIC- Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological ...
-
Manufactured by Aerator Solutionsbased in USA
For more than half a century, the EcoJet aerator design has provided proven results for municipal and industrial markets throughout the world. With ultimate versatility, no other mechanical aerator is more rugged or more efficient. The EcoJet offers unparalleled performance and superior reliability, low operating costs, and remarkable ...
-
Manufactured by H2O Innovationbased in CANADA
The flexMBR is the first membrane bioreactor open-source design that can operate MBR modules from different suppliers. It provides flexibility to switch from one membrane to another without having to redesign the entire plant. By choosing the versatile flexMBR platform over a specific module design. system owners have the flexibility to choose and change membranes. Replacement of modules becomes ...
-
Manufactured by Mazzei Injector Company, LLCbased in USA
For wastewater facilities requiring increased dissolved oxygen concentrations, the Mazzei AirJection Wastewater Aeration system with a drop-in MTM™ Mixing Nozzle Manifold and surface Mazzei Venturi injector(s) is the solution. The MTM nozzle manifold can be installed at any basin depth without having to drain the aeration basin or ...
-
Manufactured by Claro Incbased in CANADA
burpers, mechanical mixers, recirculation pumps, aerators, and/or jet ...
-
Manufactured by Purestream, Inc. and Purestream ES , LLCbased in USA
The Purestream Sigma low speed surface mechanical aerator is the result of years of development and refinement from hundreds of successful installations. The Sigma aerator offers the user unsurpassed durable construction, flexible design and maximum efficiency for wastewater treatment. These features make the Sigma Aerator the ...
-
Manufactured by Jaeger Aerationbased in USA
Lagoon Aeration: Oxidation for BOD removal, NH3 – Nitrification, Mixing. Deployment Method: Floating Pontoons for variable water levels, Self-weighted drop in & retrievable rack system. Mixing & Aeration: Area of influence up to 50’ [15m], Depth installed 5’ to 30’ [1.6m to 9m]. Mechanical plants: ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
to be installed at the base of tanks and to operate either in aeration or in a mixing mode. Sofie® is a good alternative to mechanical fine bubble aerators and is suitable for ponds with oxygen or mixing requirements. ...
-
Manufactured by Sanitaire - a Xylem brandbased in USA
Combining Sanitaire diffused aeration, Flygt submersible mixing and overall process application, as well as instrumentation and process control from Sanitaire and YSI in both new and retrofit applications, Xylem’s Sanitaire Bioloop oxidation ditch delivers up to 50% better energy efficiency, while remaining adaptable to a wide range of ...
-
Manufactured by Canadian Crystallinebased in INDIA
In this segment we are proud to introduce our product known as Sewage Treatment Plant. Based on the flow and raw sewage characteristics aeration methodology's selected. Imported, patented Submersible aeration mechanism are used which are noise less & efficient. Submersible aeration mechanisms suck air from ...
-
Manufactured by Vinnbiobased in INDIA
It is a formulation of beneficial pond bacteria, which has been used in aquaculture ponds. They function well in fresh, brackish or salt water. The beneficial microbes in BioClean have been selected for their ability to biodegrade complex organic compounds like proteins, fats, oils, cellulose and ...
-
PremiumManufactured by Fluence Corporationbased in USA
This surface aerator provides high-oxygen transfer rates for the most challenging and heavily loaded industrial and municipal applications. Long-lasting performance, and the highest oxygen-transfer rates of any mechanical aeration system on the market. The TWISTER low-speed aerator is designed for long-term, continuous operation. ...
-
PremiumManufactured by Fluence Corporationbased in USA
This air stripper serves as a low-maintenance, cost-efficient alternative for filters, packed towers, and mechanical aerators for fast, efficient removal of contaminants. Fluence’s Breeze air stripper serves as a low-maintenance, cost-efficient alternative for filters, packed towers, and mechanical aerators for fast, ...
-
Manufactured by Smith & Loveless Inc.based in USA
Smith & Loveless' vertical arcuate impeller blade design is more efficient than the radial vane design. The Smith & Loveless mechanical aerator blade curvature yields high pumpage with minimal head, thus maximizing oxygen transfer and mixing. The Smith & Loveless mechanical aerator comes in Fixed and Floating ...
-
Manufactured by Smith & Loveless Inc.based in USA
Smith & Loveless' vertical arcuate impeller blade design is more efficient than the radial vane design. The Smith & Loveless mechanical aerator blade curvature yields high pumpage with minimal head, thus maximizing oxygen transfer and mixing. The Smith & Loveless mechanical aerator comes in Fixed and Floating ...
-
Manufactured by MGD Process Technology Inc. (MGD)based in USA
The Turborator is a self aspirating submerged impeller aerator and mixer. When the patented Turborator® impeller rotates in a liquid, a low pressure zone is created behind each blade. This low pressure zone creates a strong vacuum which draws air down the shaft and disperses as fine bubbles into the surrounding liquid. Air is introduced ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you