Surface Aeration (Water Aeration) Equipment
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: ...
-
Manufactured by Aquatec-Maxcon Pty Ltdbased in AUSTRALIA
The AquaSAL Aerator is a specialised vertical shaft, fixed bridge aerator, designed specifically for oxidation ditches. Thousands of units are in use worldwide. The AquaSAL is installed in 80% of Australia’s Carrousel® oxidation ditches. The AquaSAL is a true turbine impellor aerator that produces high oxygen transfer as ...
-
Manufactured by SCM Tecnologiebased in ITALY
The low-speed aerators series ASP are suited to pump big water quantities with reduced absorbed power. They are mainly used in waste water treatment plants for biological treatment of wastes and in lagooning systems. ASP-F version has been created for stationary installations. This version is equipped with galvanized painted steel rotor, or, ...
-
Manufactured by Aeris Global Limitedbased in NEW ZEALAND
Axial flow aerator with patented instantaneous radial discharge. World renowned for high aeration efficiency in field conditions due to maximum transfer of kinetic energy to water surface. Installations range from small tanks to massive lagoons due to exceptional mixing and oxygen dispersion. ...
-
Manufactured by Puroxi Pure Water Global Inc.based in CANADA
High-performance surface aerators dramatically push high volumes of water into the air. This process increases the overall health of your water and keeps it thoroughly mixed. Introducing oxygen and water movement breaks up stratification, eliminates odour, discourages algae growth, and promotes a healthy aquatic ...
-
Manufactured by Tasetbased in SOUTH KOREA
Activated sludge process. Oxidation Ditch process. Floating aerator. Equalizing ...
-
Manufactured by ClearBlu Environmentalbased in USA
Kasco Surface Aerators lead the market with more installations than any other manufacturer. In an independent study by Auburn University, Kasco Aerators were found to deliver up to 3.0 lbs of oxygen per horsepower per hour of operation, proving them to be some of the most efficient and effective units on the market. Built for ...
-
Manufactured by Corgin Ltdbased in UNITED KINGDOM
Corgin’s Vertex Surface Aerator is, to our knowledge, the most efficient world-proven mechanical aerator. The modern impeller design is over 50% more efficient than some older designs. The distinctive seven-bladed impeller with its controlled splash pattern is unique. In addition, it has 7 main features which set it apart from the ...
-
Manufactured by Hubert Stavoren B.V.based in NETHERLANDS
An (axial flow) surface aerator pushes water from under the water’s surface up into the air, then the droplets fall back into the water, mixing in oxygen. It is used to treat waste water – it is effective in introducing oxygen to the top foot of a water volume. surface aerators can also be used to ...
-
Manufactured by Ekotek Construction Trade and Industry Ltdbased in TURKEY
The basic principle of operation of the EKOFAN V-LS, is an impeller rotating at the surface of the water and pulverising into small droplets thus increasing the surface area in contact with air. EKOFAN V-LS aerators operate at slightly higher speed than other similar low speed aerators. This results with a smaller torque and thus ...
-
Manufactured by BIOTRADEbased in FRANCE
Surface aerator for the oxygenation and mixing of urban or industrial ...
-
Manufactured by BIOGEST AGbased in GERMANY
For the mixing and oxygen supply in aeration tanks BIOGEST AG developed the CROWN-surface aerator. This aerator has been optimized continuously in the last years in cooperation with the Technische Universität Darmstadt (Technical University of Darmstadt) to maximize its capability. Consequently today an efficient and ...
-
Manufactured by Liquitekbased in AUSTRALIA
Liquitek has provided aeration and mixing solutions in Australia for more than 10 years. Liquitek undertakes local fabrication of components of some equipment under licence with key elements provided by our OEM partners. Final assembly is handled by Liquitek technicians. We also undertake installation, commissioning and testing as ...
-
Manufactured by Hindustan Water Engineering Companybased in INDIA
HWE Surface Aerators are manufactured using latest technological procedures. Oxygen transfer capacity of the aerator varies from 1.6 -2.2 kg per H.P. per hour. We provide mechanical surface aerator units in carbon steel construction or stainless steel construction as per the client's requirement. These units can ...
-
Manufactured by Kasco Marine, Inc.based in USA
High performance surface aerators dramatically push high volumes of water into the air. This process increases the overall health of your water and keeps it thoroughly mixed. These self-contained units deliver up to 3.0 lbs of O2 per horsepower per hour of operation, making Kasco surface aerators the most dependable and efficient ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-AQUA 8 aerators generate a particularly flat water jet which is distributed 360° around the ...
-
Manufactured by SCM Tecnologiebased in ITALY
The high-speed floating aerators are designed for lagooning, variable level tanks, water storage basins and and for mixing tanks in general. The water pumping action results in the transfer of the oxygen obtained from the water chipping. The units may be easily added or relocated to other uses as changing customer requirements may ...
-
Manufactured by PMC Engineering Turkeybased in TURKEY
Impeller Diameter from 0.70 M to 3.6. Vertical shaft surface aerators are easily assembled on all types of fixed bridges. If water level is subject to any changes. Suction nozzle below the impeller increases the effective depth. If the ideal water depth is exceeded, the effectivedepth of Vertical shaft surface aerator can be ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Excell aerator with the high efficiency surface impeller and the floor-scouring lower turbine efficiently provides aeration at full speed and at 80-90% turndown (drawing 10-20% nameplate power), while still maintaining sufficient mixing in the basin. The Excell® aerator offers the best energy savings, mixing efficiency ...
-
Manufactured by Spaans Babcockbased in NETHERLANDS
In 1960 Spaans Babcock started with the production of different types of surface aerators. Modern Surface Aerators experienced a renaissance for some years. New developments make Surface Aerators to an economic solution and offer in addition advantages that hardly any other system can realize. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you