Surface Aerator (Water Aeration) Equipment In France
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: ...
-
Manufactured by BIOTRADEbased in FRANCE
Surface aerator for the oxygenation and mixing of urban or industrial ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-AQUA 8 aerators generate a particularly flat water jet which is distributed 360° around the ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Excell aerator with the high efficiency surface impeller and the floor-scouring lower turbine efficiently provides aeration at full speed and at 80-90% turndown (drawing 10-20% nameplate power), while still maintaining sufficient mixing in the basin. The Excell® aerator offers the best energy savings, mixing efficiency ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
Reliable and efficient oxygen enrichment with effective matter distribution and activated sludge circulation - as a basis for the optimal activity of microorganisms and thus a particularly good extraction of pollutants in biological wastewater treatment ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-HSA-HSM combined surface aerators / mixers are the most cost-effective way to aerate or mix the contents of a tank with a single unit and its 2 motors. The two functional parts of the unit can be used both in single operation and in combined operation, as the induced currents in the tank complement each other ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Slow speed aerators used for aeration and mixing of urban and industrial wastewater in various processes. Provided in either fixed bridge or floating designs. Ideal for Aerating most types of wastewater or industrial euents. The TLF® Turbine Aerator is one of the most ecient aeration products in the ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Axial flow aerator with patented instantaneous radial discharge. World renowned for high aeration efficiency in field conditions due to maximum transfer of kinetic energy to water surface. Installations range from small tanks to massive lagoons due to exceptional mixing and oxygen ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
of the solution in the lagoons. Designed for simple installation and can be in situ above the water surface without draining the lagoon. This aerator is used for many various applications including bioreactors, activated sludge reactors, SBRs and fixed and variable level treatment ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Bladed Horizontal surface aerator suitable for circular, racetrack or rectangular channel. Designed to be maximise oxygen and flow. Use of high-quality materials of construction together with mechanical gear driven equipment. Reliable equipment with extremely long service life. ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
The Aquaeromix provides a dual function of directional flow and mixing of oxygen into the wastewater below the surface level. The Self Aspirating Aerator has a unique impeller and vacuum chamber design to drawing air below the surface water level. The Aquaeromix mixes the air into the water and produces fine to medium sized Oxygen ...
-
Manufactured by Transmisie engineering, a. s.based in SLOVAKIA
Offered low-speed surface aerators are designated for the intensive aerating of water during its continual mixing in a tank. By reverse rotation the mixing effect is higher. Low-speed surface aerators are mostly used in aeration tanks of the biological degree in waste water treatment plants. They ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
Efficient and reliable mixing and aeration for lagoon wwtps. For the important task of mixing and aeration in aerated lagoon treatment plants the engineer or operator had only two options until today: He could either use surface aerators or floating membrane aerators. While the ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In the field of surface aeration Landustrie has a long history and broad experience. Landustrie designs, manufactures, supplies, installs and maintains many types of aeration systems, with either surface aerators, aeration rotors, diffusers and Landox flow boosters. Since the introduction of our ...
-
Manufactured by GPC Biobased in USA
Materials: Borosilicate glass vessel. 316L stainless steel (head-plate and the support). Silicone ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
Aqualogic Lago facilitates targeted nitrification/denitrification in pond treatment plants, combined with high carbon and phosphate elimination efficiency by reconstruction of an existing pond into an SBR-pond to enrich the activated sludge, required for the biological cleaning ...
-
Manufactured by ATB Water GmbHbased in GERMANY
In addition to our standard range of wastewater treatment plants with a connected load of up to 1,000 PE, we offer tailor-made solutions for small and medium-sized municipal applications. We see ourselves in this area as a product-independent planning and construction company for wastewater treatment plants with a capacity of up to 10,000 PE or 15,000 ...
-
Manufactured by ATB Water GmbHbased in GERMANY
This type of system can be implemented quickly and easily as a system based on standard components. The wastewater treatment plant has been specially designed for small settlements and villages as well as for catering, hotel and commercial businesses. By combining individual, modular SBR lines, wastewater treatment plant sizes from 50 to 1,000 PE or up to 150 m3/day can be realised. Depending on ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you