Surface Aerator (Water Aeration) Equipment In Germany
-
Manufactured by BIOGEST AGbased in GERMANY
For the mixing and oxygen supply in aeration tanks BIOGEST AG developed the CROWN-surface aerator. This aerator has been optimized continuously in the last years in cooperation with the Technische Universität Darmstadt (Technical University of Darmstadt) to maximize its capability. Consequently today an efficient and ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-AQUA 8 aerators generate a particularly flat water jet which is distributed 360° around the ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Excell aerator with the high efficiency surface impeller and the floor-scouring lower turbine efficiently provides aeration at full speed and at 80-90% turndown (drawing 10-20% nameplate power), while still maintaining sufficient mixing in the basin. The Excell® aerator offers the best energy savings, mixing efficiency ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
Reliable and efficient oxygen enrichment with effective matter distribution and activated sludge circulation - as a basis for the optimal activity of microorganisms and thus a particularly good extraction of pollutants in biological wastewater treatment ...
-
Manufactured by Biogest International GmbHbased in GERMANY
The perfect hydraulic design allows intensive mixing and high oxygen input. Oxygen efficiency up to 2.5 kgO2/kWh in domestic sewage (Alpha (α)-value = 0.9). Oxygen input capacity ranges up to 250 ...
-
Manufactured by Aquacultur Fischtechnik GmbHbased in GERMANY
The series of hobby aerators is used in hobby areas, as well as for small to medium-sized ponds in fish farming. Designed for reliable continuous operation, this aerator is equipped with a robust submersible motor, which also allows use during the winter, eg for the purpose of keeping ice free. Please make sure that the aerator is not ...
-
Manufactured by ATB Water GmbHbased in GERMANY
ATB-HSA-HSM combined surface aerators / mixers are the most cost-effective way to aerate or mix the contents of a tank with a single unit and its 2 motors. The two functional parts of the unit can be used both in single operation and in combined operation, as the induced currents in the tank complement each other ...
-
Manufactured by Newterra, Ltd.based in CANADA
With the growing use and challenge caused by supposedly flushable wipes, we have customized our Aire-02® Aspirators with a larger stainless steel antifouling propeller and housing for low maintenance operation that excels in heavy debris conditions. The resilient design with the patented rotating propeller forces water outward horizontally past the end of the shaft, creating a vacuum that ...
-
Manufactured by Newterra, Ltd.based in CANADA
Uniform oxygen dispersion. Complete basin circulation. The Aire-O2 Aspirator Aerator produces a horizontal and circular flow pattern, providing whole basin circulation. Improve your wastewater treatment with higher removal rates of Biochemical Oxygen Demand (BOD) and suspended ...
-
Manufactured by Newterra, Ltd.based in CANADA
Performance like the Aire-O2 Aspirator Aerator. Designed for a tight budget: The Aire-O2 Series 275 Aspirator Aerator offers high quality materials with the same engineering integrity as the Aire-O2 Aspirator Aerator at a reduced price. Ideal for retrofits, upgrades, and supplemental aeration; this high quality, minimal ...
-
Manufactured by Newterra, Ltd.based in CANADA
Maintaining the proper level of oxygen dispersion in your aquaculture ponds is critical to the success of your operation. Poor dissolved oxygen levels, fluctuating water temperatures, and stratification can all negatively affect fish health and pond production. The Aire-O2 Series II Aspirator Aerator operates by creating a ...
-
Manufactured by Newterra, Ltd.based in CANADA
The Effective, Reliable Aerator and Mixer for Fine Bubble Aeration. Aeration Industries Research & Development engineers called upon decades of experience and a commitment to bring you more innovative and effective wastewater solutions. Our efforts successfully blended the most desirable aeration and mixing features. The ...
-
Manufactured by Newterra, Ltd.based in CANADA
Pulp and paper mill wastewater treatment produces a large amount of residual solids, presenting a number of issues in relation to wastewater treatment, discharge, and sludge ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
Efficient and reliable mixing and aeration for lagoon wwtps. For the important task of mixing and aeration in aerated lagoon treatment plants the engineer or operator had only two options until today: He could either use surface aerators or floating membrane aerators. While the ...
-
Manufactured by UTV AGbased in GERMANY
AEROFIX©-ducts are stationary systems with especially resistant and quickly to lay HD-PE channel bases and high-quality iron covers developed for highest loads, caused e.g. by wheel loaders. The ducts embedded into the decomposition surface aerate the compost heaps. The air volume via nozzle openings can be adjusted ...
-
Manufactured by CUSS Chriwa Umwelt-Systemtechnik und Service GmbHbased in GERMANY
Membrane pressure aerators, Submersible aerators, Surface ...
-
Manufactured by thoreka GmbH + Co. KGbased in GERMANY
Use: Round, square or rectangular activated sludge basins Conversion from surface aeration or other outdated aeration techniques. Procedure: Fine bubble aeration with separate vertical spiral flow, for operation as absolute mixing reactor with selective denitrification zone. Technique: Aeration through use of ...
-
Manufactured by CUSS Chriwa Umwelt-Systemtechnik und Service GmbHbased in GERMANY
these extreme values, the waste water is first collected in mixing and equalisation tanks and actively aerated with submersible motor, surface or membrane pressure aerators. In downstream anaerobic processes, aeration is dispensed with and the wastewater is merely homogenised with top- or side-entry agitators. A possibly ...
-
Manufactured by KIK Kunststofftechnikbased in GERMANY
Fluidizing with PE-porös: Many dry bulk materials can be put into a fluid-like state by “fluidization”, in other words, passing air through them. This mobile state can be used for homogenizing or mixing, discharging or flow-conveying, drying or cooling, fluidized-bed sintering of powdered ...
-
based in GERMANY
Energy-efficient. Maintenance-free. Self-cleaning. AEROFIT.V is one of four processes for aeration of waste water within the portfolio of HAGER + ELSÄSSER. Each process has been developed for specific areas of application, each with their own typical characteristics and requirements. For AEROFIT.V, these are mainly for pulp and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you