Wastewater Sludge (Water Aeration) Equipment Available In Guatemala
-
Manufactured by Mazzei Injector Company, LLCbased in USA
Aerobic Sludge Digestion with Mazzei Technology. As with Activated Sludge Digestion, Aerobic Sludge Digestion can be made easier and more efficient with Mazzei’s AirJection® Wastewater Aeration Technology. Ponds containing organic matter, nitrogen or other compounds are often high in Biochemical Oxygen Demand (BOD) and ...
-
Manufactured by Mazzei Injector Company, LLCbased in USA
Mazzei technology makes the treatment of wastewater basins easier, more efficient and quieter. Using either Mazzei’s patented AirJection® Wastewater Aeration Technology or as a pure oxygen system, wastewater is pumped through one or more high efficiency Mazzei® Venturi injectors, forcing ambient air or concentrated oxygen to ...
-
by Aquasuitebased in NETHERLANDS
Aquasuite PURE is a machine learning and AI solution for the control and optimisation of wastewater treatment works. It uses the proven Aquasuite AI algorithms to predict influent flow and load, enabling its virtual operator to control the wastewater treatment works with maximum efficiency and effectiveness. ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Ovivo's patented G-TADTM (Gravity Thickened Aerobic Digestion) process provides for the integrated operation of a gravity sludge thickener with two or more aerobic digesters. By operating these units as a combined system, improved treatment and efficiency is ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
OVIVO single drop diffusers are at the heart of our thickened aerobic digestion (TAD) systems. Our 2-inch MS® diffusers and 1-inch TransMAX® diffusers eliminate clogging by separating the air-metering orifice from the diffuser, and locating it above the basin liquid level. Therefore, no liquids or solids are ever in contact with the orifice restriction, the point at which most other ...
-
PremiumManufactured by Fluence Corporationbased in USA
Upgrade Wastewater Treatment Plants with SUBRE; With increased urbanization, wastewater resource recovery facilities face new challenges. When a conventional activated sludge wastewater treatment facility has reached its limit, Fluence's SUBRE can come to the rescue. Instead of enlarging current plants and building new basins, ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
PULSION MBR modules offer up to 40% aeration energy reduction and 25% footprint reduction. Leveraging the key differentiating features of PURON MBR, this innovation pulses a large bubble through a chambered fiber bundle, creating a piston-like pumping action that results in lower air and aeration energy requirements than traditional scouring methods. Improved recirculation of mixed liquor in the ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
This patented module features reinforced PVDF hollow fibers that are fixed only at the bottom, virtually eliminating the clogging buildup of hair, fibrous materials and sludge solids. Solids and particulates, including bacteria, remain on the outside, while permeate is drawn through the membrane to the inside of the fibers. The aeration ...
-
PremiumManufactured by Reliant Water Technologiesbased in USA
A wastewater treatment plant gives off two end products – relatively clean water and sludge, a collection of untreated solids residue. The latter is a primary problem in almost every wastewater plant in the world. Sludge and organic solids within the wastewater process cause offensive odors and always add ...
-
Manufactured by Transcend Cleantec Pvt. Ltd.based in INDIA
Transcend Cleantec Private Limited has pioneered the technique of manufacturing Multi Disc Screw Press in India. These sludge dewatering press are intended for mechanical dewatering of community and industrial wastewater sludge. They are recommended for wastewater sludge dewatering on low-capacity municipal ...
-
Manufactured by Remosa - Recubrimientos y Moldeados s.a.based in SPAIN
of the activated wastewater sludge in the reactor ...
-
Manufactured by Fuchs Enprotec GmbH - a subsidiary of the METAWATER Groupbased in GERMANY
The FUCHS CENTROX-Aerator with foam control - type CX-C - is used to introduce oxygen into equalization basins and plants for the aerobic treatment of sewage sludge. It provides for fine bubble aeration and thorough mixing of the wastewater or the sludge. Foam arising from aeration flows back into the suction funnel. Thus the foam ...
-
Manufactured by Kordes KLD water and wastewater systems GmbHbased in GERMANY
SBR treatment plant BIOclear vario-S for wastewater and sludge treatment up to 5,000 Pe. The BIOclear vario-S wastewater treatment plant is the ideal treatment system when sludge treatment is required in addition to wastewater treatment. This plant is mostly used in larger units for towns and residential areas ...
-
Manufactured by Klawa Anlagenbau GmbHbased in GERMANY
After leaving the aeration basin, biologically cleaned wastewater and activated sludge enter final sedimentation. The role of final sedimentation is to separate the activated sludge from the water. Pump technology and scraping devices return sludge deposits to the aeration basin and send them for additional ...
-
Manufactured by Newterra, Ltd.based in CANADA
Pulp and paper mill wastewater treatment produces a large amount of residual solids, presenting a number of issues in relation to wastewater treatment, discharge, and sludge ...
-
Manufactured by Fuchs Enprotec GmbH - a subsidiary of the METAWATER Groupbased in GERMANY
The FUCHS CENTROX Aerator is used to introduce oxygen into wastewater lagoons, activated sludge plants and equalization basins. It provides for fine-bubble aeration as well as circulation and thorough mixing of the wastewater. Due to functional design and good workmanship it is a sturdy, reliable and almost maintenance-free machine. The ...
-
Manufactured by PB Equipmentbased in USA
Our exclusive Bosman Fine Bubble Aerators in activated sludge wastewater treatment have unquestionable advantages over course and medium bubble aeration regarding oxygen transfer efficiency and lower power consumption. The Plate Aerators also have an outstanding life expectancy and easy maintenance. Holding the promise of paying for ...
-
Manufactured by Remosa - Recubrimientos y Moldeados s.a.based in SPAIN
The NECOR is a total-oxidation system based on biological purification by means of moving-bed activated sludge from wastewater. This compact, high-purification-performance unit for treating wastewater from small and medium-size communities complies with the requirements of Royal Decree 606/2003, the European Regulation of Council Directive ...
-
Manufactured by Clean Water Technology, Inc.based in USA
The DSP (Dewatering Screw Press) is a powerful wastewater treatment system able to treat many types of industrial wastewater or sludge in one single operational ...
-
Manufactured by CromaFlow Inc.based in USA
Provided as an ancillary process primarily for sludge management, the CROMAFLOW Aerated Sludge Processing Systems greatly reduce Bio solids produced. This translates to annual savings and allows for a more efficient operating Wastewater Treatment System. The Sludge Processing Tank (SPT) receives excess sludge ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you