Water Aerator (Water Aeration) Equipment Available In Grenada
-
Manufactured by KAMPS s.a.based in BELGIUM
This aerator is based on the well-know AIRMAX aerator. For limited power aerator Kamps delivers a standard low-cost product with very high efficiency. This product is designed for small application like fishing ponds, shrimps farms, and small lagoon. ...
-
Manufactured by Acquaeco S.r.lbased in ITALY
Force7 is classified as a powerful aerator. The speed of its propeller creates a pressure drop that draws air from the surface through a suction tube. Force7 injects a large volume of air in the form of micro bubbles. It is dissolved by turbulence, optimizing the dissolution of air and oxygen in the water. The Force7 propeller also ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
The efficiency of biological treatment plants depends considerably on the quality and suitability of the aerator used. The major factors to be considered in the selection of aerators are the basin dimensions, the required amount of oxygen and mixing. We guarantee the efficiency of our aerators in all aspects on account of sound evaluations of ...
-
Manufactured by BIOGEST AGbased in GERMANY
BIOGEST AG developed the CROWN Pond water aeration system, Type TBL for permanent and effective aeration of waste water treatment lagoons. The CROWN Pond water aeration, Type TBL, is very simple to retrofitting in existing lagoon water treatment system is succesfully used under ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
This type of aerators consists of blades mounted on the pipe forming the main shaft and is generally used in oxidation ditches. One end of the main shaft is fixed to the bedding, while the other end is connected to the drive unit. Both ends of the aerator need to be protected against ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
GYROX vertical shaft aerators, licensed by Lurgi Bamag GmbH (Germany), are among the most efficient aerators. The simple mechanical structure consisting of actuator, shaft and fan allows easy operation. It can either be easily mounted on fixed bridge, or be attached to the side of the basin by means of a special barge system in cases where ...
-
Manufactured by AWAS International GmbHbased in GERMANY
Designed for later installation of vehicle wash facilities to improve the water quality and optimize the existing water treatment ...
-
Manufactured by Körting Hannover AGbased in GERMANY
In the case of waste water aeration Körting Ejectors fulfil the highest demands that effluent and sewage treatment plants can make on an efficient and reliable oxygen transfer ...
-
by Aero-Tubebased in USA
From the innovation experts at Swan comes the original Aero-Tube® hose with the blue stripe. Aero-Tube® is a dual-patented aeration hose that works in conjunction with an air supply to deliver oxygen to water in a capacity unmatched by any other aeration system on the market today—and at a fraction of the ...
-
Manufactured by AquaMasterbased in USA
An elegant and convenient option for many waterscape designs can be AquaMaster's Fixed Base Water Feature Fountains. Designed for smaller water features and pond applications. Fixed Base Water Feature Fountain equipment adds beauty easily and economically. All of our Fixed Base Water Feature Fountains are constructed from ...
-
Manufactured by Agrona B.V.based in NETHERLANDS
The horticultural world is changing rapidly. Knowledge about all aspects of the profession is becoming more available by the day. Big improvements are sometimes found in small things, and nano- and micro-bubbles are a perfect example of this. Nanobubbles are so small that they do not travel to the surface but stay afloat in the ...
-
Manufactured by Taizhou Jinhulong Mechanical Equipment Co.,Ltdbased in CHINA
It's made according to the updated enterprise standard.The major technological index for the enterprise standard is more higher than the industrial standard. Integrated impeller, easy to disassemble, and common with ordinary water truck impeller, wide application range. The impeller forms a spiral impeller, which makes the flow of flow ...
-
Manufactured by Patrick Charles Pty Ltd. (PCPL)based in AUSTRALIA
The Aspiro plus is the latest development from PCPL.The ASPIRO PLUS supplies air below the water surface and transfers it into a highly mixed horizontal water stream not unlike the wake of a boat. This efficiently mixes air and water into the lagoon, tank or other basin that requires it. The development of the ASPIRO PLUS sees higher ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
low energy consumption, with high efficiency. easy operation for areation system, easy assembly and disassembly, minimum maintenance demand, weights around 100-200 ...
-
Manufactured by Lakeside Equipment Corporationbased in USA
A vital component of the CLR Process is the horizontal, bladed rotor aerator. The Lakeside Rotor provides oxygen to the biological mass, mixes microorganisms uniformly and adds mixing velocity to the channel to prevent solids from settling. Lakeside surface aerators have provided reliable aeration and mixing in more than 1,700 ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
Chlorination is the process of adding the element chlorine to water as a method of water purification to make it fit for human consumption as drinking ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
All types of industries for dosing chemicals such as:, Sulphuric Acid - pH, Correction/Control, Caustic - pH Correction/Control, Sodium Hypochlorite - Disinfection, Aluminum Sulphate - Coagulation, Ferric Sulphate - Coagulation, Ferric Chloride - Coagulation, Synthetic Polymers - Used water, effluent and sludge treatment, Organic Coagulants ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
Wastewater Clarification, or sedimentation, is a common and essential process in municipal and industrial wastewater treatment plants. Clarifiers consist of tanks or basins which hold wastewater for a period of time, allowing solids or other materials suspended in the water to settle to the ...
-
Manufactured by Lakeside Equipment Corporationbased in USA
Lakeside has more than 35 years of oxidation ditch experience leading to the development of the present day Closed Loop Reactor (CLR) Process. With more than 1,700 installations, the CLR Process is proven to be reliable, flexible and ...
-
Manufactured by Jäger Umwelt-Technik GmbHbased in GERMANY
The Endless Tube 75 provides a solution for efficient aeration system without conventional piping requirement and the possibility of high local contents. The ET75 offers the advantages of saving in terms of cost and installation time. Basic accessories are needed for an easy and fast installation. These can be purchased separately from ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you