Water Aeration Equipment in Switzerland

24 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Aeration ×

  • In: Europe ×

  • In: Switzerland ×

ABS - Nopon Disc Diffuser System

by Sulzer     based in Winterthur, SWITZERLAND

The reliable ABS Nopon disk diffuser system is one of the world’s most widely-installed fine-bubble aeration systems, available in five alternative diffuser models. Preassembled diffuser elements enable fast and easy installation. Retrofits are available to increase aeration efficiency.

ABS - Model OKI - Nopon Submersible Aerator Mixer

by Sulzer     based in Winterthur, SWITZERLAND

The ABS Nopon OKI submersible aerator is a heavy-duty, non-clogging, gentle mixing unit which can operate both as an aerator and as a mixer for wastewater and water treatment in municipal and industrial plants. It is used for sludge stabilization in SBR, MBR, and MBBR processes.

ABS - Model XTA & XTAK - Self-Aspirating Submersible Aerators

by Sulzer     based in Winterthur, SWITZERLAND

he XTA and XTAK are self-aspirating submersible aerators for wastewater and water treatment in municipal and industrial plants. Main areas of application are mixing and equalization tanks, activated sludge tanks, SBR, and sludge storage tanks at water depths from 2 to 9 m (7–30 ft).

Model AMD.07.18.1410 - Submersible Mixer with Direct Drive

by Grundfos Arnold AG     based in Schachen, SWITZERLAND

Applications: Mixing of solids, Solids suspension and flushing in pump pits, Mixing in small tanks.

Jet pumps for waste water aeration

by Körting Hannover AG     Distributor in Hannover, SWITZERLAND

In the case of waste water aeration Körting Ejectors fulfil the highest demands that effluent and sewage treatment plants can make on an efficient and reliable oxygen transfer system.

Model Type ABS XRCP - Submersible Recirculation Pump

by Sulzer     based in Winterthur, SWITZERLAND

The XRCP is specifically designed for pumping and recirculation of activated sludge in the denitrification/nitrification process of a wastewater treatment plants. This compact and easy-to-handle pump is efficient and reliable.

Submersible Agitator Mixer

by Zorg Biogas AG     based in Zurich, SWITZERLAND

The electric motor-driven submersible mixer is designed for operation in the explosive environment of the biogas plant. Agitator can be adjusted to the mast by means of motor support for height adjustment purposes.

Bontec - Model BT50 - Aeration Element

by Kelag Systems AG - BONTEC AG     based in Sennwald, SWITZERLAND

Trough constant advancement and long years of experience equipping plants in municipal and industrial wastewater treatment we have developed an optimal aeration element for the various areas of application.

Removable Basin Partition Wall

by Arnold AG - A Grundfos Company     based in Schachen, SWITZERLAND

Applications: Partitioning of aeration basins, Separation of dentrification zones.

Bontec - Model BT - Acid Aeration Cleaning System

by Kelag Systems AG - BONTEC AG     based in Sennwald, SWITZERLAND

At many treatment plants, the pressure in the aeration system continuously increases due to a contamination of the aeration pores. The increased pressure requires additional energy. The systematic and optimum use of resources is the strategy and the strength of BONTEC. With our innovation, we are offering you an innovative solution for your WTP to ...

Sulzer ABS - Model Type SB - Flow Booster

by Sulzer     based in Winterthur, SWITZERLAND

The slow-running submersible unit is highly energy efficient with a wide range of applications in wastewater treatment plants.

Sulzer ABS - Model Type XSB 900 to 2750 - Flow Booster

by Sulzer Ltd     based in Winterthur, SWITZERLAND

The complete answer to Low-Speed, highly energy efficient submersible mixing in a wide range of applications in industry and municipal treatment plants.

Aeration and Bleed Valve

by vonRoll hydro (suisse) ag     based in Oensingen, SWITZERLAND

Operating overpressure: minimum 0.2 bar, maximum 16 bar. Working temperature up to + 40 °C. Flanges in accordance with EN 1092-2. Housing with thick film epoxy coating inside and out. PN 25 and PN 40 on request

Liquid Jet Gas Compressor

by Körting Hannover AG     Distributor in Hannover, SWITZERLAND

Using a liquid as motive medium, liquid jet gas compressors compress gases or vapours with large pressure differences. There is a special ejector design for mixing air or other gases with the motive liquid or for aerating waste water. These ejectors operate at a high gas/liquid mass transfer rate with simultaneous intensive mixing of the liquid ...

Model OZ-L - Ozone Generator

by Kaufmann Umwelttechnik GmbH & co.KG     Office in Schlieren, SWITZERLAND

Air cooled ozone generator for Vacuum operation with air (Air dryer incl.), or Pressure operation with compressed air (Air dryer incl.), orPressure operation with oxygen. High-quality materials for virtually unlimited life span. Horizontal or vertical applicable. Ready for operation.

BIOFOR Biological Aerated Filtration System

by Degremont Technologies - a subsidiary of Suez Environnement     based in Duebendorf, SWITZERLAND

BIOFOR™ is a biological submerged filter containing a fixed, dense granular bed with influent wastewater flowing in an upward direction. The system employs a proprietary media that serves as a biological contactor as well as a filter, eliminating the need for separate clarification and saving space.

HORIBA - Model HO-300 - Two-Wire Transmitter

by HORIBA Europe GmbH     Office in SWITZERLAND

Redox potential measurement of various solutions. Suitable for aeration control of sewage treatment and neutralization of chemicals.

Model POREMET - BOPP Sintered Steel Meshes

by G. Bopp & Co. AG     based in Zurich, SWITZERLAND

This plate-like filter medium consists of five different mesh layers, bonded together to achieve the optimum combination of stability, flow rate and backwashing properties. POREMET is ideal for applications in fine and finest filtration under high pressure and in harsh operating conditions. POREMET can be combined with a range of support meshes to ...

Model OZ 2000S - Ozone Generator

by Kaufmann Umwelttechnik GmbH & co.KG     Office in Schlieren, SWITZERLAND

The ultimative, modular ozone generator for capacities up to 30 kg O3/hr.

BÜCHI - Model F-125 - Recirculating Chiller

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

Make your R-220 SE independent of supply lines. Chiller, Rotavapor R-220 SE and vacuum pump from one compact unit, hosted on a trolley. Optimal for one or multiple units.

Need help finding the right suppliers?

Let the XPRTs do the work for you