Water Aeration equipment for Water and Wastewater in Arizona

  • Submersible Mixer With Trolley For Slurry Channels POD

    Movable mixer on wheels: Four motor sizes from 2.2 to 11.0 kW. Capacity up to approx. 2,250 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 525 N to 2150 N. Supplied fully assembled on trolley with built-in hoisting gear.

    By Landia Distributor in ARIZONA (USA).

  • Custom Enclosures

    W0hether it is a partial enclosure around only the blower and motor or perhaps for fan or centrifugal blowers, we have the ability to get you what you need.

    By Universal Blower Pac, Inc. (UBP) Distributor in ARIZONA (USA).

  • PermaCap / FlexCap

    EDI PermaCap™ diffusers are ideal for aeration applications where intermittent coarse bubble operation is desired. PermaCap units are available with either 3/8-inch or ¾-inch NPT threaded (male) inlet to allow quick and simple installation into threaded pipe applications. Optional UDM (Universal Diffuser Mount) is available for ...

    By Environmental Dynamics International (EDI) Distributor in ARIZONA (USA). from Coarse Bubble Product line

  • Submersible Stainless Steel Mixer (300 RPM) POPR-I

    Submersible agitator for waste water treatment plants and industry (stainless steel). Six motor sizes from 3.0 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

    By Landia Distributor in ARIZONA (USA). from Mixers - Submersible Mixers Product line

  • Landia - Model AXP-I 500 - Recirculation Axial Pump

    Submersible axial pump for waste water treatment plants and industry: Six motor sizes from 2.2 to 11.0 kW. Capacity up to approx. 2900 m³/hour. Pipe diameter 500 mm.

    By Landia Distributor in ARIZONA (USA). from Chopper Pumps - Axial Pumps Product line

  • Landia - Model AXD-I 300 - Recirculation Pump

    Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 1.5 to 4.0 kW. Capacity up to approx. 800 m³/hour. Pipe diameter 300 mm.

    By Landia Distributor in ARIZONA (USA). from Chopper Pumps - Axial Pumps Product line

  • Aeroductor

    The Lakeside Aeroductor effectively removes inorganic grit from treatment plant influent in a controlled, aerated environment. Air is injected into an eductor tube located in the center of the basin, creating a vertical pumping action that circulates the tank's contents. This circulation keeps organics in suspension while allowing the heavier grit ...

    By Lakeside Equipment Corporation Distributor in ARIZONA (USA). from Grit Removal Product line

  • Closed Loop Reactor (CLR)

    Lakeside has more than 35 years of oxidation ditch experience leading to the development of the present day Closed Loop Reactor (CLR) Process. With more than 1,700 installations, the CLR Process is proven to be reliable, flexible and efficient.

    By Lakeside Equipment Corporation Distributor in ARIZONA (USA). from Water Aeration Product line

  • Submersible Stainless Steel Mixer (750 RPM) PODR-I

    Submersible agitator for waste water treatment plants and industry (all in stainless steel). Four motor sizes from 1.1 to 4.0 kW. Capacity up to approx. 1,525 m³/hour. 750 propeller revolutions/minute. Axial thrust from 400 N to 2150 N.

    By Landia Distributor in ARIZONA (USA). from Mixers - Submersible Mixers Product line

  • MaxAir SS

    Proven design is ideal for both mixing and aeration applications.  EDI MaxAir™ SS diffuser provides broad band, coarse bubble aeration for maximum mixing efficiency. The unit is available in 24-inch or 12-inch lengths. A full 48-inch air release perimeter is provided with the 24-inch unit, and 24-inch air release perimeter for the ...

    By Environmental Dynamics International (EDI) Distributor in ARIZONA (USA). from Coarse Bubble Product line

  • INVENT iLAGOON - So-Called Pool Purification Plants

    There is a further INVENT standard solution for so-called pool purification plants. For that kind of wastewater treatment plant, we supply floating aeration systems, floating mixers, and a specially developed clarifier cleaning system. In this field too, INVENT has extensive know-how and many years of experience.

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in ARIZONA (USA). from System Solutions Product line

  • Aqua - Model DDM - Direct Drive Mixer

    The AquaDDM Mixer provides maximum wastewater mixing efficiency. When mixing requirements are the controlling factor, the AquaDDM mixer can reduce power costs, while delivering 3-4 times the mixing of any aerator of the same size. The ducted impeller improves pumping efficiency. The integrated flow vanes and lower input torque eliminate the need ...

    By Aqua-Aerobic Systems, Inc. Distributor in ARIZONA (USA). from Aeration & Mixing Product line

  • MASTRRR - Model Series 32 - Submersible Vacuum Gas Or Liquid Chemical Mixer

    The GAS MASTRRR series 32 submersible design allows the chemicals to be flash mixed directly into the water stream, channel, chamber, or rapid mix box with superior velocity gradient mixing intensity. The units are available in vacuum style for gas or liquid chemical induction, or nonvacuum style for liquid flash mixing. The units easily install ...

    By The MASTRRR Company Distributor in ARIZONA (USA). from Gas MASTRRR Submersible Product line

  • ENTEX - Third Generation Biological Fixed Media System

    Webitat is ENTEX's third generation biological fixed media system engineered to harness the patented BioWeb technology to boost performance of Integrated Fixed-Film Activated Sludge (IFAS) system or Submerged Fixed Film systems. It is designed to to actively manage the attached environment to foster optimal biomass growth on the BioWeb. Webitat ...

    By Entex Technologies Inc. Distributor in ARIZONA (USA). from Solutions Product line

  • Venturi AirJet Aeration

    Landia’s extensive range of submersible mixers and mixer/aerators add supplementary possibilities to optimize aeration efficiency and oxygen transfer. Sufficient mixing is achieved, solids remain suspended and thoroughly mixed with oxygen enriched effluent, thus enhancing aerobic digestion and improving process efficiency and final effluent ...

    By Landia Distributor in ARIZONA (USA).

  • Director - Model I - Floating Baffle System

    Dramatically improve wastewater treatment lagoon efficiency with the Director I Floating Baffle System. Flow diversion curtains increase hydraulic retention time (HTR) and can increase the effective treatment area of a lagoon from less than 20% to over 95%. Floating baffles create hydraulic flow patterns that guide wastewater through a serpentine ...

    By Environetics, Inc. Distributor in ARIZONA (USA).

  • Aqua EnduraDisc - Fine Bubble Diffuser

    10 inch (25 cm) diameter, different slit patterns available to suit specific applications. Airflow Range: from 0.5 to 10 SCFM (0.8 to 17 m3/hr) per diffuser.  Performance: Standard oxygen transfer efficiency from 1.5% to over 2.0% per foot of submergence.  Diffuser performance is calculated for each specific application based on flux, ...

    By Aqua-Aerobic Systems, Inc. Distributor in ARIZONA (USA). from Aeration & Mixing Product line

  • Model POD-I - Submersible Mixer - 1500 RPM

    Submersible mixer for waste water treatment plants and industry. Nine motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 3,800 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

    By Landia Distributor in ARIZONA (USA). from Mixers - Submersible Mixers Product line

  • Aqua MixAir - Aeration Systems

    The Aqua MixAir system provides separate mixing with the AquaDDM Direct Drive Mixer and an aeration source such as the Aqua-Jet surface aerator or Aqua-Aerobic diffused aeration. The system has the capability to cyclically operate aeration and mixing to promote anoxic/aerobic and anaerobic environments with low energy consumption.

    By Aqua-Aerobic Systems, Inc. Distributor in ARIZONA (USA). from Biological Processes Product line

  • Mixer/Aerator PODB

    Submerged, self-priming mixer/aerator for simultaneous mixing and aeration in slurry tanks. Motor sizes from 7.5 to 18.5 Kw. Capacity up to approx. 2,250 m³/hour. 1500 propeller revolutions/minute.

    By Landia Distributor in ARIZONA (USA). from Aerators - Mixers/Aerators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you