Water Aeration Equipment in Missouri

66 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Aeration ×

  • In: USA ×

  • In: Missouri ×

Fine Bubble Aeration System

by Aquarius Technologies Inc.     Distributor in St. Louis, MISSOURI (USA)

The Aquarius Fine Bubble Aeration System has been developed by our team of engineers with an unparalleled background of experience in the design, application and operation of wastewater treatment aeration systems.  This experience comes with the knowledge that a high performance diffuser requires an equally well engineered piping system to ...

Fine Bubble Ceramic Disc Aeration System

by Aquarius Technologies Inc.     Distributor in St. Louis, MISSOURI (USA)

The Aquarius Fine Bubble Ceramic Disc Aeration System has been developed by our team of engineers with an unparalleled background of experience in the design, application and operation of wastewater treatment aeration systems. This experience comes with the knowledge that a high performance diffuser requires an equally well engineered piping ...

Coarse Bubble Aeration System

by Aquarius Technologies Inc.     Distributor in St. Louis, MISSOURI (USA)

The Aquarius coarse bubble aeration system has been developed by our team of engineers with an unparalleled background of experience in the design, application and operation of wastewater treatment aeration systems. This experience comes with the knowledge to select the right coarse bubble diffusers for the application and engineer that system to ...

Deep-Aire - Diffused Aeration System

by Airolator Corporation     based in Kansas City, MISSOURI (USA)

The Deep-Aire is an aeration system with a piston type air compressor, PVC air hose and an air diffuser. Designed to improve oxygen levels and destratification in ponds and lakes.

Fine Bubble Diffuser Holder-Membrane Disc

by Aquarius Technologies Inc.     Distributor in St. Louis, MISSOURI (USA)

The Aquarius membrane disc diffuser holder offers several advantages over alternate designs.  The membrane fine bubble diffuser is mounted in a holder that is sonic and solvent welded in the factory to the crown of the air distribution header.  This sonic and solvent welded bond is actually stronger than the pipe material itself, which ...

Venturi AirJet Aeration

by Landia     Distributor in MISSOURI (USA)

Landia’s extensive range of submersible mixers and mixer/aerators add supplementary possibilities to optimize aeration efficiency and oxygen transfer. Sufficient mixing is achieved, solids remain suspended and thoroughly mixed with oxygen enriched effluent, thus enhancing aerobic digestion and improving process efficiency and final effluent ...

Horizontal Bladed Rotor

by Lakeside Equipment Corporation     Distributor in MISSOURI (USA)

A vital component of the CLR Process is the horizontal, bladed rotor aerator. The Lakeside Rotor provides oxygen to the biological mass, mixes microorganisms uniformly and adds mixing velocity to the channel to prevent solids from settling. Lakeside surface aerators have provided reliable aeration and mixing in more than 1,700 installations ...

Closed Loop Reactor (CLR)

by Lakeside Equipment Corporation     Distributor in MISSOURI (USA)

Lakeside has more than 35 years of oxidation ditch experience leading to the development of the present day Closed Loop Reactor (CLR) Process. With more than 1,700 installations, the CLR Process is proven to be reliable, flexible and efficient.

Brown Bear - Model SC3110 - SC3610 - SC3912 - SC4912 - Self-contained Composting Aerators

by Brown Bear Corporation     Distributor in MISSOURI (USA)

The horizontal aerator provides an economical mechanical solution for dewatering sludge in beds, building windrows, blending bulking agents or additives, pulverizing and aerating or water mixing for aerobic composting. The rapid handling rate exposes 100% of the material to oxygen immediately so that noxious odors can be absorbed. Handling costs ...

Brown-Bear - Skid Loader Composting Aerators

by Brown Bear Corporation     Distributor in MISSOURI (USA)

Mounting: Universal Quick Attach similar to the skid loader bucket. Power Requirements: Unit driven by hydraulic oil from the skid loader. Not based on engine horsepower of skid. Minimum specs are: 20 gallon per minute flow and 2000psi. Maximum is 35 gallons per minute flow at 3000 psi. The Aerator has an internal pressure relief of 3000psi or ...

Model EPDM - Low Oil Diffuser

by Aquarius Technologies Inc.     Distributor in St. Louis, MISSOURI (USA)

The Aquarius membrane is a proprietary EPDM based compound that has 10% less extractable oil than similar type diffusers. This will result in a more chemically stable diffuser thereby providing longer life. The life and performance of a membrane diffuser is dependent on the environment in which it is operating. Some wastewaters are more aggressive ...

Model POD-I - Submersible Mixer - 1500 RPM

by Landia     Distributor in MISSOURI (USA)

Submersible mixer for waste water treatment plants and industry. Nine motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 3,800 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Landia - Model AXD-I 300 - Recirculation Pump

by Landia     Distributor in MISSOURI (USA)

Submersible axial pump for waste water treatment plants and industry: Four motor sizes from 1.5 to 4.0 kW. Capacity up to approx. 800 m³/hour. Pipe diameter 300 mm.

Model POP-I - Submersible Mixer - 300 RPM

by Landia     Distributor in MISSOURI (USA)

Submersible agitator for waste water treatment plants and industry. 10 motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Model POD-I - Submersible Mixer - 750 RPM

by Landia     Distributor in MISSOURI (USA)

Submersible agitator for waste water treatment plants and industry. Nine motor sizes from 0.55 to 7.5 kW. Capacity up to approx. 2,050 m³/hour. 750 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Model POP-I - Submersible Mixer Flowmaker - 150 RPM

by Landia     Distributor in MISSOURI (USA)

Submersible agitator for waste water treatment plants and industry. Seven motor sizes from 1.1 to 7.5 kW. Capacity up to approx. 3,850 m³/hour. 150 propeller revolutions/minute. Axial thrust from 500 N to 2600 N.

LIXOR - Submerged Aeration System

by Bio-Microbics, Inc.     Office in Sunset Hills, MISSOURI (USA)

LIXOR is a remarkably effective submerged aeration and mixing system. Extremely low-maintenance and surprisingly efficient, LIXOR’s non-clogging, Venturi-type diffuser supplies air for simultaneous aeration and mixing in a variety of wastewater applications. Low-cost pre- aeration, aeration, sweetening and mixing are just a few of the ...

RollsAIR - Extended Aeration System

by Bio-Microbics, Inc.     Office in Sunset Hills, MISSOURI (USA)

The RollsAIR and RollsAIR HS-STP Extended Aeration Systems are  ”Activated Sludge” systems utilizing a complete, aerobic treatment process. The complete Rollsair System is designed to be the simplest to install, operate, and maintain wastewater treatment system of its type. Engineered with non-corrosive, proprietary devices, the ...

Mixer/Aerator PODB I

by Landia     Distributor in MISSOURI (USA)

Submerged, self-priming mixer/aerator for simultaneous mixing and aeration. Motor sizes from 1.1 to 18.5 Kw. Capacity up to approx. 2,250 m³/hour. 1500 or 3000 propeller revolutions/minute.

Stainless Steel Mixer/Aerator PODBR-I

by Landia     Distributor in MISSOURI (USA)

Submerged, self-priming mixer/aerator for simultaneous mixing and aeration (all in stainless steel). Motor sizes from 3 to 11 kW. Capacity up to approx. 2,250 m³/hour. 1500 or 3000 propeller revolutions/minute.

Need help finding the right suppliers?

Let the XPRTs do the work for you