Only show results available in Virginia? Ok

Water Aeration Services

  • Premium

    Rental & Emergency Aeration

    Committed to Keeping Your Plant Up and Running. Cost Effective Rental Aeration Solutions For Emergency or Supplemental Aeration. If your aeration system goes down, is unpredictable, or is ready for an upgrade, our Aire-O2 TritonĀ® Process Aerator/Mixers can be shipped anywhere in the continental US in as little as 24 hours! Slip it in, turn it on, ...

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    ENTA - Manufacturing Equipments

    Efficiency of a treatment plant depends on the utilization of well designed mechanical equipment.ENTA manufactures its plants and equipment in strict compliance with all applicable technical and ecological standarts as well as with the specifications of virtually every acceptance authority.ENTA equipments manufactures according to TSE,DIN and BS ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY.

  • Premium

    Consulting Services

    Mechanical- and Electrical Engineering, Optimization of Wastewater Treatment Plants. Our special qualification is energy optimization and process optimization. We have a lot of experience in modernizing existing plants.  Results are energy reduction of up to 60 % by modifying the process, installing new aeration equipment and control systems. ...

    By BITControl GmbH based in Nattenheim, GERMANY.

  • Premium

    ENTA - Manufacturing and Equipment Supply Services

    The efficiency of water purification plant depends on the use of well-designed, good quality mechanical equipment. For the production of mechanical equipment, ENTA has an environmentally compatible production and produce in accordance with the norm such as TSE, DIN, BS, etc. ENTA's production program equipment include; auto-grill, grill presses, ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY.

  • OPEX & Energy Savings Services

    OxyMem’s bubble-less aeration reduces the operating costs (OPEX) for wastewater aeration by up to 75%. The efficiency of the aeration process depends heavily on the amount of surface membranescontact between air and wastewater. The most widely used aeration technologies rely on bubbles to supply air to the wastewater.

    By OxyMem based in Westmeath, IRELAND.

  • Rehabilitate

    The MARS can be quickly deployed in order to upgrade existing aerators with no dewatering and no downtime necessary – the unit is simply lowered into the treatment cell while existing infrastructure remains in place. As a result, installation costs are minimized and, through the Patented Double Bubble Technology that the MARS employs, energy ...

    By Triplepoint Water Technologies LLC based in Geneva, ILLINOIS (USA).

  • Design Services

    With the specific knowledge on the area of sewage treatment D. ten Hove Consultancy B.V. can have an important influence in the design of new plants. Especially for the heart of every biological treatment plant; aeration - sedimentation - sludge return, an invented design can be made based on sewage plants with oxidation ditches, Sequency Batch ...

    By D. ten Hove Consultancy B.V. based in Oudega, NETHERLANDS.

  • Oxylag - Aerated Lagooning by Insufflated Air

    An easy and economical solution well adapted to rural communities from 400 to 5000 pe using the aerated lagooning in deep well technique.

    By EAU PURE based in Lons-Le-Saunier, FRANCE. from Wastewater Service line

  • Aerated Stabilization Basins

    EBS is one of the most respected companies in the industry when it comes to monitoring and troubleshooting aerated stabilization basins (ASB’s) in the pulp and paper industry. EBS Principal Consultant Mike Foster has authored over ten technical papers on various aspects of ASB optimization. He is a co-author (along with Paul ...

    By Environmental Business Specialists, LLC based in Mandeville, LOUISIANA (USA). from Consulting Service line

  • Cement Facility Services

    Hot material handling systems,Project Managers,Clinker storage,silos and circular buildings,Blending silos and kiln feed,Weigh feeding,Aeration systems and piping, Slurry basin design,Slurry pumping and feeding,Aeration system and piping design,Clinker cooling and storage,Burner structures steel and concrete,Preheater towers steel and concrete.

    By Globalconstruction.com based in Orange, CALIFORNIA (USA).

  • Wastewater Lagoons

    Ennix provides a Sludge Reduction Service Program for Waste Stabilization Ponds at a fraction of the cost of removing sludge mechanically such by dredging or pumping solids. If ponds are aerated, aeration can often be reduced thus providing on-going operational cost savings in addition to sludge reduction.

    By Ennix Incorporated based in Paso Robles, CALIFORNIA (USA).

  • Aeration and Mixing Services

    The Aquaerator was originally designed for reservoirs, developed by witnessing the problems with previous aerators. The aim of the Aquaerator is to destratify, mix and aerate water bodies of any size.Thermal stratification in lakes is caused by a heating of the surface waters shutting off the convection current which mixes the reservoir leaving ...

    By AQUARIUS MARINE GROUP LTD based in Somerset, UNITED KINGDOM.

  • Lake Aeration Services

    Lakeside is a man made aquifer fed lake of 22 Ha and has no through flow of water. This standing water creates an unmixed and heavily stratified lake. Previous reports showed that the lake was subject to toxic blue green algal blooms and low Dissolved Oxygen (DO) in the deeper waters (11m), which coupled with a high temperature drop through the ...

    By AQUARIUS MARINE GROUP LTD based in Somerset, UNITED KINGDOM.

  • Wastewater Treatment

    For more than 50 years, ADS has specialized in the biological treatment of domestic and industrial wastewater. We are committed to providing our clients with the greatest cost benefit, utilizing the most innovative treatment technologies available. ADS fine bubble aeration systems are designed to meet or exceed all permitted effluent requirements ...

    By Air Diffusion Systems (ADS) based in Gurnee, ILLINOIS (USA).

  • Pilot Testing Services

    Validation of the technological capacities of our equipments and processes in line with the specific requirements of our customers often requires on-site pilot testing. Our highly qualified engineers and technicians draw up piloting protocols aiming at demonstrating the technological capacities and establishing the bases of design for the ...

    By Veolia Water Technologies Canada (Veolia Water Solutions & Technologies) based in Saint-Laurent, QUEBEC (CANADA). from Service & Parts Service line

  • Computational Fluid Dynamic Modeling

    Computational fluid dynamic modeling can predict flow patterns and oxygen transfer and should be used to: select proper aeration equipment, determine the location of aeration equipment in a basin, and optimize the operating conditions.

    By Air Products based in Allentown, PENNSYLVANIA (USA).

  • Wastewater

    The Corner Stone of Clean Water, Basically, wastewater is the flow of used water from a community. Wastewater treatment services are largely taken for granted, however few people realize how complex treatment operations are, and how useful a highly trained professional handling your operations and or maintenance can greatly reduce your down times ...

    By Technical Treatment Services, Inc. based in Sarasota, FLORIDA (USA). from Water Aeration & Wastewater Treatment Service line

  • Sidestream Elevated Pool Aeration (SEPA)

    The District's Sidestream Elevated Pool Aeration (SEPA) project received the Outstanding Civil Engineering Achievement Award in 1994. The award is the highest honor bestowed on a civil engineering project by the American Society of Civil Engineers. With the development of the SEPA stations, the District has replicated one of the most effective ...

    By Metropolitan Water Reclamation District of Greater Chicago based in Chicago, ILLINOIS (USA).

  • Water Body Restoration - Sludge Sedimentation Service

    Fine bubble ground aeration of large surfaces. Water body restoration: linear or large surface aeration in lakes to reduce sludge and avoid algae blossom by means of gases like air, oxygen gas, oxygen enriched air or liquid agents like oxygen enriched water, diluted peroxide or others.

    By DRAUSY GmbH based in Schweigen-Rechtenbach, GERMANY.

  • Remanufactured Parts

    HSI maintains a large inventory of remanufactured Hoffman and Lamson (Gardner Denver) multistage centrifugal blower parts, which allows us to quickly meet the needs of our customers. We stock a wide range of remanufactured blower parts, including cast iron housings, impellers, shafts, bearing housings, etc., for almost every Hoffman and Lamson ...

    By HSI , Inc. based in Houston, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you