Water Aeration services for Water and Wastewater available in Virginia

  • Premium

    Rental & Emergency Aeration

    Committed to Keeping Your Plant Up and Running. Cost Effective Rental Aeration Solutions For Emergency or Supplemental Aeration. If your aeration system goes down, is unpredictable, or is ready for an upgrade, our Aire-O2 Triton® Process Aerator/Mixers can be shipped anywhere in the continental US in as little as 24 hours! Slip it in, turn it on, ...

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Oxylag - Aerated Lagooning by Insufflated Air

    An easy and economical solution well adapted to rural communities from 400 to 5000 pe using the aerated lagooning in deep well technique.

    By EAU PURE based in Lons-Le-Saunier, FRANCE. from Wastewater Service line

  • Aerated Stabilization Basins

    EBS is one of the most respected companies in the industry when it comes to monitoring and troubleshooting aerated stabilization basins (ASB’s) in the pulp and paper industry. EBS Principal Consultant Mike Foster has authored over ten technical papers on various aspects of ASB optimization. He is a co-author (along with Paul ...

    By Environmental Business Specialists, LLC based in Mandeville, LOUISIANA (USA). from Consulting Service line

  • Computational Fluid Dynamic Modeling

    Computational fluid dynamic modeling can predict flow patterns and oxygen transfer and should be used to: select proper aeration equipment, determine the location of aeration equipment in a basin, and optimize the operating conditions.

    By Air Products based in Allentown, PENNSYLVANIA (USA).

  • Remanufactured Parts

    HSI maintains a large inventory of remanufactured Hoffman and Lamson (Gardner Denver) multistage centrifugal blower parts, which allows us to quickly meet the needs of our customers. We stock a wide range of remanufactured blower parts, including cast iron housings, impellers, shafts, bearing housings, etc., for almost every Hoffman and Lamson ...

    By HSI , Inc. based in Houston, TEXAS (USA).

  • Biowatertech Installation Services

    BWT has installed over 1000 aeration systems both for industrial and municipal world wide. All the on-site materials had inpected by our experienced engineers before start-up. 14 days commissioning before system performance by project engineers and offer TWO years warranty for each contracted installtion.

    By BIOWATERTECH PRODUCT (BWT)CO., LTD. based in Guangzhou, CHINA.

  • Start Up & Commissioning

    In a MBBR delivery package, commissioning and start-up assistance could be included. These stages take place after installation of aerators and effluent screens are finished. Our experienced personnel can provide guidance and assist in aeration pipe installation in order to provide optimal mixing of carriers and oxygen. A MBBR reactor is normally ...

    By AnoxKaldnes AB - a Veolia Water Company based in Lund, SWEDEN.

  • Pneumatic Down Flow Aeration / Oxygenation

    In some cases, subsidizing dissolved oxygen availability is most reliable using either pure oxygen or compressed air containing a greater fraction of oxygen than atmospheric air (21% oxygen). Pure oxygen has been used in some parts of the US to maintain dissolved oxygen downstream of a reservoir dam release (to maintain fishery habitat) and where ...

    By Ecosystem Consulting Service, Inc based in Coventry, CONNECTICUT (USA). from Aeration and Circulation Service line

  • Lake Aeration Services

    Lakeside is a man made aquifer fed lake of 22 Ha and has no through flow of water. This standing water creates an unmixed and heavily stratified lake. Previous reports showed that the lake was subject to toxic blue green algal blooms and low Dissolved Oxygen (DO) in the deeper waters (11m), which coupled with a high temperature drop through the ...

    By AQUARIUS MARINE GROUP LTD based in Somerset, UNITED KINGDOM.

  • Cement Facility Services

    Hot material handling systems,Project Managers,Clinker storage,silos and circular buildings,Blending silos and kiln feed,Weigh feeding,Aeration systems and piping, Slurry basin design,Slurry pumping and feeding,Aeration system and piping design,Clinker cooling and storage,Burner structures steel and concrete,Preheater towers steel and concrete.

    By Globalconstruction.com based in Orange, CALIFORNIA (USA).

  • Wastewater & Environment Solutions

    Probiotic Solutions is Bio Huma Netics’ line of biostimulants that are used to reduce sludge, cut down on odor, break down FOG’s, and control BOD and COD levels naturally without introducing harsh chemicals into the environment.

    By Bio Huma Netics, Inc. based in Gilbert, ARIZONA (USA).

  • Blower Testing Services

    Blower testing like pump testing needs five parameters to be measured. They are Suction Pressure, Suction Temperature, Discharge Pressure, Discharge Temperature and Input Power. Using algorithms isentropic and polytropic efficiencies are calculated. Flow can also be calculated using the measured input power. All kinds of blowers can be tested ...

    By Advanced Energy Monitoring Systems (AEMS) based in Bristol, UNITED KINGDOM. from Testing and Monitoring Service line

  • Artificial Circulation Services

    Artificial circulation was the first aeration method developed. When successful, it mixes the entire water body, expanding the warm surface epilimnion all the way to the bottom. The most common equipment used for the technique is diffused air 'bubblers' which circulate the water from the bottom to the surface. However, there are also Solar-Driven ...

    By Ecosystem Consulting Service, Inc based in Coventry, CONNECTICUT (USA). from Aeration and Circulation Service line

  • Wastewater Lagoons

    Ennix provides a Sludge Reduction Service Program for Waste Stabilization Ponds at a fraction of the cost of removing sludge mechanically such by dredging or pumping solids. If ponds are aerated, aeration can often be reduced thus providing on-going operational cost savings in addition to sludge reduction.

    By Ennix Incorporated based in Paso Robles, CALIFORNIA (USA).

  • Waste Water Consultant – Evaluation and Testing

    In addition to wastewater consulting, Jaeger-AERATION offers extensive testing capabilities, from assessing prototypes to testing production units. Assessment factors include mechanical strength, biochemical compatibility, headloss performance, aerobic denitrification, and more. In our lab, we can simulate intermittent operational stress on ...

    By Jaeger Aeration based in Longmont, COLORADO (USA).

  • GVA - Service & Maintenance

    GVA provides optimum product performance and customized project service packages. Modern waste water treatment is technically very complicated, and every plant is designed individually for a specific purpose. That is why the wide range of service and maintenance tasks in your project is so important to the efficiency and economy of a plant. GVA ...

  • Aeration Lagoon / Pond Dredging Services

    LWT's dredging systems are used for aeration lagoon / pond dredging applications. A dredging system for removal and disposal of raw sewage solids, decayed algae and microorganisms, and algae-laden sludge results in a long term solution for treatment plants. Aeration lagoon / pond dredging increases lagoon storage volume, provides improved ...

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Wastewater

    The Corner Stone of Clean Water, Basically, wastewater is the flow of used water from a community. Wastewater treatment services are largely taken for granted, however few people realize how complex treatment operations are, and how useful a highly trained professional handling your operations and or maintenance can greatly reduce your down times ...

    By Technical Treatment Services, Inc. based in Sarasota, FLORIDA (USA). from Water Aeration & Wastewater Treatment Service line

  • Process Technologies Service

    Our HI-FLO Surface Aeration System® is designed to improve wastewater treatment plant process performance and efficiency by improving mixing and mass transfer efficiency in secondary aeration tanks.

    By Mixing & Mass Transfer Technologies LLC based in State College, PENNSYLVANIA (USA).

  • Aeration and Mixing Services

    The Aquaerator was originally designed for reservoirs, developed by witnessing the problems with previous aerators. The aim of the Aquaerator is to destratify, mix and aerate water bodies of any size.Thermal stratification in lakes is caused by a heating of the surface waters shutting off the convection current which mixes the reservoir leaving ...

    By AQUARIUS MARINE GROUP LTD based in Somerset, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you