Water Basins Equipment For Water And Wastewater Available In Indonesia
-
PremiumManufactured by VEGA Americas, Inc.based in USA
With ceramic measuring cell. Application area: The hydrostatic absolute pressure transmitter with ceramic measuring cell is ideal for level measurement of water/wastewater, as well as level measurement in deep wells or in tanks on ships. Maximum cable length = 1000 m. The VEGAWELL 52 is suitable for continuous level measurement of liquids. Typical applications are measurements in water/waste ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 770 and 780 wafer style rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warm or freeze. Quick interchange with any flap type check valve. Available ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex™ Style 730 rubber duckbill check valves are designed to easily slip over an existing pipe and be attached with heavy-duty stainless steel clamps. It can be installed in both vertical and horizontal ...
-
PremiumManufactured by KISTERSbased in GERMANY
HyQuest Solutions’ vented hydrostatic pressure sensor VHPS is a programmable submersible level transmitter for measuring water level and temperature in groundwater and surface water. It is low power, robust, and especially designed for use in harsh environments, ensuring longterm measurement ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex 720 in-line flanged rubber duckbill check valve is designed to fit directly inside of an existing pipe. This particular valve is supplied with a flat face rubber flange, which allows installation between existing pipe flanges, and eliminates the need for a valve body. Various drilling standards are available upon ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
High accurate with intuitive operation. For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bailer sampler consists of a stainless steel tube and is available in a design with a 33 mm or 45 mm diameter and a content of resp. 250 ml and 1000 ml. The stainless steel tube is open at the top-end and fitted with an unscrewable cap at the bottom. A ball check is fitted in the bottom. As soon as the water sampler is lowered it can be lifted again. To assure a proper replacement of the ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
LMP 307T for continuous level and temperature measurement . Advantage: simultaneous recording of level and temperature with separate independent signal amplification. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 … 20 mA analogue signal in 2-wire technology is provided. For drinking ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
In order to neutralize acids and basics we use either sodium hydroxide solution (NaOH), calcium carbonate or lime suspension (Ca(OH)2) to increase pH levels. We use diluted sulphuric acid (H2SO4) or diluted hydrochloric acid (HCl) to decline pH levels. The dose of neutralizing agents depends upon the pH of the water in a reaction basin. Neutralization reactions cause a rise in ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For ultrasonic flow measurement of slight to heavily polluted media in part filled an full pipes and channels. Complete measurement system in connection with KDA ...
-
PremiumManufactured by Proco Products, Inc.based in USA
TheProco ProFlex Style 710 flanged duckbill check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The StormTank Module 25 Series is the flagship product of the StormTank brand, offering a stormwater management solution rated for extreme load applications. It can be sized and configured to fit nearly any site layout. With up to 97% void space and a stackable design, the system minimizes installation footprint while allowing for management of large volumes of ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For standard measuring tasks, IP66/IP68, Type 6P. Application area: Axial cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex-approval. VEGAPULS C 21 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable for use in water treatment, pumping ...
-
Manufactured by Fenno Water Ltd Oybased in FINLAND
In terms of sand filters, “continuous” means that the sand bed of the filter is continuously pumped through the washer using an air pump, from the bottom of the bed to the surface of the bed. Continuous flushing ensures an even flow of flushing sludge with lower flows. No flushing water and reject sludge basins are needed for storage in this case. Flushing air requirement is ...
-
Manufactured by Baltimore Aircoil Companybased in USA
Since 1978, thousands globally installed, proving the VXI coolers reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation. No external moving parts, helping it withstand the toughest weather. Various corrosion-resistant materials, including the unique Baltibond hybrid coating for guaranteed long service life. Optional extended surface ...
-
Manufactured by Diversitechbased in CANADA
The MONSOON™ Wet Downdraft Table product series delivers the safe capture of hazardous/combustible dusts with the smallest equipment footprint in the industry. This self-contained wet downdraft table's patent-pending design achieves a very high face-velocity at a very affordable price. A wide range of application kits and custom fittings can help you meet your NFPA and OSHA ...
-
Manufactured by Hawk Measurement Systemsbased in AUSTRALIA
The MiniWave emits an ultrasonic pulse, which is reflected from the surface of the liquid being measured. The reflected signal is processed using specially developed software to enhance the correct signal and reject false echoes. Adaptive sensitivity control allows the unit to dynamically adjust and improve the received echoes for the best possible measurement ...
-
Manufactured by Zeta Crezen Co., Ltd.based in SOUTH KOREA
FEATURE: Rubber track with each BLDC motor. Flexible vacuum head with 750mm width. Particle-free passage up to Ø40mm. Mobile controller with joystick. HD resolution camera with LED light. Built-in sludge pump with Ø50 discharge. ...
-
Manufactured by W-Rix Ltdbased in FINLAND
Waterix COOLIT -cooler is easy to install and service. The efficiency is higher than in cooling towers. Its main applications are cooling of industrial process water and wastewater or heating plant’s turbine waters. Waterix COOLIT coolers has a superb structure that does not get dirty and is maintenance-free, as it does not have any parts liable to blocking such as nozzles. Compared to ...
-
Manufactured by SPX Cooling Technologies, Inc. - a division of SPX Corporationbased in USA
The Marley/Balcke CP fiberglass, induced draft, counterflow cooling tower is the ideal solution for larger space-sensitive applications. Its corrosion resistant fiberglass construction makes it an excellent alternative to stainless steel cooling towers. While the choice of high performance, low clog, or splash fill options ensures the product flexibility to meet your exact water quality issues at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you