Water Blasting Articles

  • Acrylonitrile Tower Cleaning & Degassing - Case History

    Background: A chemical plant had an Acrylonitrile Tower that was plugged with crystallized acrylonitrile. There were also "chunks" of this material throughout the tower. Additionally, 4-5 inches of sludge material was at the bottom of the tower. An Industrial Services Company was required to remove these "chunks", as well as to remove all traces of acrylonitrile ...


    By SuperAll Products, LLP

  • Cleaning and degreasing heavy duty equipment (the challenges and solutions)

    Degreasing and cleaning of heavy duty equipment is carried out periodically for different reasons; depending on the operator, and where they're using their equipment. Here is a short list of typical reasons for cleaning and degreasing: preventive maintenance operator brand reputation safety regulations company internal policy ...


    By Coulson Ice Blast

  • Rehabilitation & protection from chemical attack

    When Resolute Forest Products was determining a solution for rehabilitation and protection of their 50,000 square foot concrete clarifier damaged from mild chemical attack and abrasion from their pulping process they contacted MBI Corexcel, a local corrosion-resistant specialized contractor, for assistance. General Manager - Pierre Fauteux - called Solhydroc, a long tenured distributor of ...


    By Sauereisen Inc.

  • Canadian pulp mill clarifier - Rehabilitation & protection from chemical attack

    When Resolute Forest Products was determining a solution for rehabilitation and protection of their 50,000 square foot concrete clarifier damaged from mild chemical attack and abrasion from their pulping process they contacted MBI Corexcel, a local corrosion-resistant specialized contractor, for assistance. General Manager - Pierre Fauteux - called Solhydroc, a long tenured distributor of ...


    By Sauereisen Inc.

  • 3D Printing Services

    What is cheap 3d printing service china? 3D printing technology is a collective term for a series of rapid prototyping technologies, the basic principle of which is laminated manufacturing. 3d printing service providers will use a computer-aided design model to produce a three-dimensional object. 3D print service China      includes 3d design and printing ...


    By Duch Group

  • What is 3D Printing Service?

     3D print service china is a collective term for a series of rapid prototyping technologies, the basic principle of which is laminated manufacturing. 3d printing service providers will use a computer-aided design model to produce a three-dimensional object. 3D printing service includes 3d design and printing services, 3d laser printing services, 3d model printing services, 3d ...


    By Duch Group

  • 3D Printing Services

    What is 3D Printing Service? 3D printing technology is a collective term for a series of rapid prototyping technologies, the basic principle of which is laminated manufacturing. 3d printing service china providers will use a computer-aided design model to produce a three-dimensional object. 3D printing ...


    By Duch Group

  • Ice blasting vs dry ice blasting media cost

    Approximate cost per pound Ice: $0.00437 Dry Ice: $0.50 - $2.00 Approximate cost per hour of blasting Ice: $0.79 - $1.31 Dry Ice: $257.40 - $429.00 Ability to obtain as much as you need Ice: Yes – make ice on demand. ...


    By Coulson Ice Blast

  • Clarifier rehabilitation in Clermont, Canada - Case study

    CANADIAN PULP MILL CLARIFIER Rehabilitation & Protection From Chemical Attack When Resolute Forest Products was determining a solution for rehabilitation and protection of their 50,000 square foot concrete clarifier damaged from mild chemical attack and abrasion from their pulping process they contacted MBI Corexcel, a local corrosion-resistant specialized contractor, for ...


    By Sauereisen Inc.

  • Case study - Ice Blast technology for steam generator decontamination

    Background At Point Lepreau NGS the Health Physics Department looked for alternative decontamination methods that could be applied to reduce the dose expenditure as a result of maintenance on the primary side of our steam generators. Due to the characteristics of the CANDU design (i.e., primary circuit being high purity D2O) introduction of foreign contaminants was also a concern. ...


    By Coulson Ice Blast

  • Digital Asset Management facilitates compliance to NATA case study

    Customer Typical mining company in Australia Application Operations, Calibrations, Maintenance &  ...


    By Ecotech - ACOEM Group

  • Case study - PCB Containment - ICA of Jacksonville

    Location: Jacksonville, FL System Applied: JBT 303 Substrate / Area: PCB Containment, 38,000 sq.ft. Date Completed: November 2005 Quality Control: Dudley Primeaux II, Primeaux Associates, LLC Project Description The building was scheduled for demolition, but the existing slab was impacted with PCB. It was ...

  • Calcium Sulfate Scale Control with ML2580

    Background Mining company operates an ore roasting operation for gold recovery in the western US. SO2 is generated in the process and quenched with water creating a super saturated stream of SO4 . Calcium sulfate (gypsum) scale forms in the process plumbing and reduces critical flow rates. After months of reduced production, the decision was made to shut down and hydro-blast the system. The ...

  • The Different Kinds of Dust Collection Booths

    Factories that produce heavy dust particles require a dust collector system in place, so employees can breathe in clean and pure air at all times. Also, with one of these systems in place, machinery functions well and lasts longer. Dust collection booths also help limit dust into a closed area and safely trap it inside a closed space for ...


    By ProVent, LLC

  • RYDLYME gains approval of U.S. Navy and USS ENTERPRISE case study

    The main and auxiliary condensers on the USS ENTERPRISE (CVN 65) nuclear aircraft carrier accumulated a significant amount of scaling and foreign debris with a majority of it in the saltwater portion of the system. Each condenser contains 8,880 tubes measuring 0.5 inch in diameter and 16 feet in length, and is a critical component of the vessel’s main propulsion steam and electrical ...

  • Three Things to Check When Buying Gum Removal Machines

    Gum removal machines are highly sought after these days. Cleaning companies buy these machines aplenty. Purchase officers at public works departments do the same. Even business individuals who want to venture into the field of cleaning work find these machines to be among the most beneficial in their arsenal. The ease of job certainly depends on the type of gum removal machines one uses. If one ...


    By Daimer Industries Inc.

  • The way to Cease Roofing Leaking

     Roofing leakages can happen to acquire a quantity of factors. These people usually start out smaller than average grow over amount of in time so that you can larger difficulties. Nevertheless, a good tiny roofing spill could cause main injury to your home. Besides building wet spot locations by yourself accomplished ceilings, best leaking might lead to mold and mildew growth in addition to ...


    By Ultimate Linings, LTD

  • Protective Coatings

    Coatings An industrial coatings is a paint or coating defined by its protective, rather than its aesthetic ...


    By Ultimate Linings, LTD

  • Gas Pressure Washers for Industrial Cleaning On the Go

    Gas pressure washers are used in commercial and industrial areas to tackle a wide range of cleaning tasks. Pressure washing units have fast become a preferred cleaning machine for many businesses as these units clean in a way that is both eco-friendly and very efficient as well. Pressure washing machines use pressurized water power to effectively blast away stains and deposits from different ...


    By Daimer Industries Inc.

  • Antifouling System Reduces Algal and Biological Growth on the In-Situ TROLL 9500 Water Quality Instrument

    Abstract New regulations regarding clean water have increased the need for long-term environmental monitoring. As water quality sensor technology improves and becomes more stable, the limiting factor in these projects becomes biological and non-biological fouling of instrumentation. Biofouling of environmental equipment increases site visits and maintenance, which elevate monitoring costs. ...


    By In-Situ, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you