Water Booster Equipment For Water And Wastewater Available In Newfoundland
-
PremiumManufactured by ForeverPure Corporationbased in USA
ForeverPure Seawater water reverse osmosis systems are fully manufactured and tested in the Silicon Valley, California, USA. Only the highest quality components are used in our products. These components include FILMTEC membranes, Allen Bradley or Siemens PLC, Siemens/ABB contactors, Danfoss or FEDCO Pumps, and etc.. Combining decades of water treatment equipment manufacturing experience and ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Bright Technologies offers complete Belt Filter Press dewatering systems that are skid or trailer mounted. We design and manufacture the skid equipment package for high throughput, low maintenance, superior cake solids and ease of ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekrarr Model 1308 Recirculating Water Purification System is an inexpensive, convenient source of deionized, mercury-free water for the Series 3300Xi Mercury CEM. The system has two stages of pre-filtration to eliminate all particulate and organic contamination in the water. A reverse osmosis (R/O) unit then removes the bulk of ionic material. Two stages of finishing ion exchange (IX) resin ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
Cornell’s clear liquid centrifugal pumps are commonly used in agricultural irrigation and are known for their superior efficiency. These pumps are designed to save energy costs, potentially saving thousands of dollars annually depending on usage. With a wide range of options available, Cornell offers clear liquid pumps that meet or exceed efficiency standards for centrifugal ...
-
PremiumManufactured by ZetaÅŸ Kimyabased in TURKEY
The location of the water tank is extremely important at the point of increasing the efficiency of use and creating a more spacious environment. The techniques and evaluations used in this regard are in accordance with the application principle and should overlap with the project. The underground water tank, which provides durable and trouble-free storage for many years, is one of the best ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Bright Technologies offers complete Belt Filter Press Dewatering systems that are trailer mounted. Easily mobilized to project sites, these trailer mounted systems feature a plug and play concept, resulting in quick and easy setup. We design and manufacture the trailer mounted equipment package for high throughput, low maintenance, superior cake solids and ease of ...
-
Manufactured by Aquaporin A/Sbased in DENMARK
Get safe and tasty drinking water directly from your faucet. For those who like to drink great tasting water, for those who appreciate simplicity, for those who are tired of carrying plastic bottles from the supermarket, and for those who want tap water without pesticides, viruses and bacteria. Simply for those who want their tap water to be the very best it can be. Here is ONE water purifier, ...
-
Manufactured by Motor Controls, Inc. (MCI)based in USA
MCIis raising the standard on pump station reliability, efficiency and intelligent operation with our new line of engineered package pump stations.MCI’scustom manufacturing capabilities include structural and pipe fabrication. Our advanced structural abilities coupled with our powder coat capabilities allow us to meet the stringent and harsh environmental needs for engineered package pump ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
IPEX Plenumline is a robust acid waste system made from flame-retardant Polyvinylidene Fluoride ...
-
Manufactured by Dutypoint Ltdbased in UNITED KINGDOM
The Dutypoint VG is a compact, cost-effective cold-water booster set that is ideal for a wide range of residential and commercial applications. Despite its compact design, the Dutypoint VG includes technology normally associated with larger booster sets, including fault signals, BMS integration, error code display and a full-size control panel as standard. The addition of high-efficiency pumps ...
-
Manufactured by Dutypoint Ltdbased in UNITED KINGDOM
The Dutypoint VR booster range boasts a very compact footprint, designed to assist where plant room space or access is limited. The inlet and discharge manifold on the VR is located on the same side of the pump; these units can be installed in very confined spaces. The VR is engineered to very high standards and was the first ever booster set to be fully ...
-
Manufactured by Apollo Goessnitz GmbHbased in GERMANY
Multistage High Pressure Pump Q = 500 m³/h. H = 320 m. P = 25 bar. T = 140 ...
-
Manufactured by Flint & Wallingbased in USA
Single stage pumps for suction lifts up to 25' (8 m). Non self-priming. Suction lifts up to 25' (8 m). Low-lead brass or thermoplastic impellers. Capacities to 6,600 GPH (24,984 LPH). Pressures to 45 PSI. Discharge can be rotated for horizontal or vertical ...
-
Manufactured by Falcon Pumps Pvt. Ltdbased in INDIA
Motor body : graded cast iron. Stamping : electrical grade silicon steel sheet with 3.9 to 4.5 watt loss/hourt. Rotor shaft : stainless steel 420 h&t. Impeller : graded cast iron and dynamically balanced. Ball bearing : reputed make zz ball bearing. Seal : monoblock pump with asbestos gland packing & mechanical seal. Winding : super enameled ec grade copper ...
-
Manufactured by Shanghai SILI Pump Industry Co., Ltdbased in CHINA
The SILI CIS pump is a single stage, single suction, end-suction centrifugal marine pump. The CIS pump is designed according to international standard. ISO2858. It is for the end-suction centrifugal pump about the designation, nominal duty point and dimensions. The CIS horizontal centrifugal marine pump is suitable liquid for fresh water or sea water with little particle below 70 C degree. ...
-
Manufactured by Shanghai SILI Pump Industry Co., Ltdbased in CHINA
The SILI EHC pump is a single stage, single suction, end-suction centrifugal marine pump.The EHC horizontal centrifugal marine pump is suitable liquid for fresh water or sea water with little particle below 70 C degree. Specially mechanical seal for 120 C degree is available. EHC Taiko centrifugal pump application for cooling pumps and fresh water booster or circulation pumps. In addition, bilge ...
-
Manufactured by Hayward Tyler Ltdbased in USA
Electro-submersible pump and motor sets that save critical topside space, while offering high reliability and low total cost of ...
-
Manufactured by Bombas Ideal, S.Abased in SPAIN
Suction and discharge flanges are on the same axis. Both flanges are identical. (In-Line). Pumps are single stage centrifugal type. The flow rates of the pumps comply with the DIN 24255. RNLtype pumps are direct coupled with norm electric motors which comply with the VDI standards and I EC Frame sizes. Pump shaft is supported by motor bearings. Mechanical seals are unbalanced type, seal faces are ...
-
Manufactured by Side Industriebased in FRANCE
The DIP BOOSTER circulators by Side Industrie are derived from the high range of wastewater circulators DIP Systeme®, and are also made of «boiler-plated» stainless steel. They are composed of a shared hydraulic body that fits the pipe size, allowing the gravity flow to go through it. Includes a «by-pass» valve, a level sensor upstream and 2 variable speed hydraulic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you