Only show results available in Virginia? Ok

polymer dosing Equipment

  • Auto Polymer Dosing

    Sludge Treatment Dosage Optimizer Reduces Polymer Requirements by up to 35% Eliminates Over dosage & Under dosage Events. Real Time Monitoring, Reporting & Optimization. ipad Interface = Low T.S.S. and Drier Cake Solids. In line sediment conditioning and management system for applications ranging from inline clarifiers to portable dredging ...

    By SPINPRO based in Bellingham, WASHINGTON (USA).

  • Suntree - Model Floc-Doser™ - Polymer Dosing Tray

    For use during construction and post construction, and will hold a standard size polyacrylamide applicator log The Floc-Doser can be an integral part of your NPDES water shed management plan. As a water treatment device just under the grate at each inlet, the water flow is dosed at a maximum time and distance away from the next point of treatment ...

  • Sludge Dewatering Polymer Dosing Station

    Canamidex polymer systems (chemical preparation) are made completely from high quality stainless steel. They are available in a batch system, automatic and semi automatic systems to suit the needs of every customer.

    By Canamidex International Corp. based in Richmond Hill, ONTARIO (CANADA). from Canamidex Sludge Dewatering Products Product line

  • Model i-DOSE - Intelligent Dosing Control Systems

    To effectively remove solids and COD from wastewater with flocculation-flotation systems, chemical dosing is required. Iron chloride is added to coagulate the water into small particles. By neutralizing and adding a polymer these small particles grow into larger flocs. These flocs can be separated by using a flotation system (DAF). The dosage of ...

    By Nijhuis Industries based in Doetinchem, NETHERLANDS.

  • Novotec - Dosing Systems

    Novotec builds dosing systems for powders according the needs of the client. These dosing systems are also used in our automatic polymer units. A special designed screw, combined with an electric motor, ensures precise dosing values in any circumstance. The unit is fitted with a point level detection system, that informs the operator in case the ...

    By Novotec nv based in Merelbeke, BELGIUM. from Polymer Systems Product line

  • ADS - Polymer Mixing and Dosing Unit

    All components shall be mounted on a single skid constructed of 3″ channel iron and 3/16″ carbon steel plate. Dimensions of the complete unit shall be 78″ L x 78″ W x 69″ H. Unit shall be constructed such that the forks of a fork lift can be inserted into the base of the skid to allow the entire unit to be moved. Skid ...

    By AQUA-Zyme Disposal Systems, Inc. based in Van Vleck, TEXAS (USA).

  • Polymer make up and dosing system

    Continual and batch polymer make up systems, designed and built to make up powder or emulsion type polymer

    By Water Tecnik Ltd. based in Banbridge, NORTHERN IRELAND.

  • High Precision Gravimetric Blenders

    Quantum embodies innovations that radically change the way injection moulding machines and extruders are fed with blends of materials (virgin, recycled, masterbatch and additives). These innovations contribute to increasing the efficiency of production, and feature improved design, innovative technologies and high performance components, which ...

    By PIOVAN S.p.A. based in S. Maria di Sala (Venezia), ITALY. from Dosing & Blending Product line

  • MILROYAL - Motor Driven Dosing Pumps

    MILROYAL D pumps were specifically developed to produce micro flow rates at medium and very high pressures.Their flow rate/pressure performance, ranging from 0.11 l/h to 345 l/h / 500 bar, means that they can be used for numerous applications with dosing accuracy of ±1%.MILROYAL D pumps are particularly rugged and can operate in the ...

    By Milton Roy Europe based in PONT SAINT PIERRE, FRANCE. from Dosing Pumps Product line

  • Model G Series - Motor Driven Dosing Pumps

    Series G™ dosing pumps are electric motor-driven pumps with mechanical diaphragm liquid ends. Simple, economical and rugged, they offer great flexibility and a wide selection of liquid ends compatible with most chemicals. With a corrosion-resistant plastic or aluminium housing, depending on the model, they are based on two technologies ...

    By Milton Roy Europe based in PONT SAINT PIERRE, FRANCE. from Dosing Pumps Product line

  • LMI - Electromagnetic Dosing Pumps

    The LMI range's electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or ...

    By Milton Roy Europe based in PONT SAINT PIERRE, FRANCE. from Dosing Pumps Product line

  • Premium

    Amston Filter Press For Dewatering Sludge

    The Amston filter press is a recessed plate pressure filter used for dewatering sludge. A low dose of polymer is often required to assist dewatering. The Amston filter presses require a lower polymer input than belt presses due to their use of higher pressures and finer cloths.

    By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Sludge Treatment Systems Product line

  • REIFOMAT - Model 500 - Fully Automatic Dissolution and Dosing for Liquid Polymers

    REIFOMAT 500:more successful Fully automatic dissolution and dosing for liquid polymers . In order to operate an economic sludge dewatering, is an ideal polymer preparation and dosing the basis for all sludge dewatering equipment Before polymers can be used, they must be solved and invert, ie, the ionic charge carriers are first prepared by ...

    By REIFLOCK Abwassertechnik GmbH based in Baden-Baden, GERMANY.

  • solidXfloc - Polymer-Station

    For preparing polymers up to 0.1%. Our intelligent polymer dosing system and energy-efficient, high-performance agitator perfectly unfold the polymer chains so that all of the active substance comes into use, 100%. Can process liquid or powdered polymers during preparation.

    By Sülzle Klein GmbH based in Niederfischbach, GERMANY.

  • Dosing Equipment

    Innovative, modular dissolving and dosing technology. We manufacture a wide range of dosing units for municipal and industrial applications. Our range of products includes among others polymer make-up stations for powder and liquid polymers, systems for the preparation and dosing of retention aids, storage and bulk systems according to WHG (German ...

    By P & P Dosiertechnik GmbH based in Alpen, GERMANY.

  • Coarse & Fine Dosing Feeders

    There are often applications with enormous variety in the required capacities, which means that settings of 1 in 20 or higher are needed. It also sometimes happens that the central inlet and outlet are far from each other. Klinkenberg Zaandam has resolved this by combining a large dosing screw with the fine dosing screw; the coarse dosing screw ...

    By Klinkenberg B.V. based in Krommenie, NETHERLANDS. from Dosing Screw Feeders Product line

  • Polymer Machines

    Noxon’s polymer machines consists of communicating vessels. This allows continuous withdrawal of polymer solution as preparation starts automatically as soon as the amount of solution sinks to a pre-set level. This ensures reliable operation.

    By NOXON AB based in Fjärås, SWEDEN.

  • Polymore/PolyRex - Dissolving and Dosing System

    A complete dissolving and dosing system for liquid concentrated emulsion or dispersion polymers.

    By Tomal AB based in Vessigebro, SWEDEN.

  • Chemical Dosing Unit

    Polymer units (manual, semi and full automatic).Chemical solution preparing and dosing units.Chemical powder silos 25 liters…100 m3.Chemical powder dossiers

    By Fenno Water Ltd Oy based in Helsinki, FINLAND.

  • Hire of Chemical Dosing Systems

    FloQuip hire chemical dosing systems to customers who either have a short term requirement for chemical dosing equipment as part of a process enhancement or change, or as a replacement for equipment which has come to the end of it’s useful life. FloQuip carry an extensive range of pumps, emulsion and powder make-up and dosing systems ...

    By SNF Group of Companies based in Riceboro, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you