polymer dosing pump Equipment

35 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Chemicals Dosing ×

  • Keyword: polymer dosing pump ×

LMI - Electromagnetic Dosing Pumps

by Milton Roy Europe     based in PONT SAINT PIERRE, FRANCE

The LMI range's electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or ...

MILROYAL - Motor Driven Dosing Pumps

by Milton Roy Europe     based in PONT SAINT PIERRE, FRANCE

MILROYAL D pumps were specifically developed to produce micro flow rates at medium and very high pressures.Their flow rate/pressure performance, ranging from 0.11 l/h to 345 l/h / 500 bar, means that they can be used for numerous applications with dosing accuracy of ±1%.MILROYAL D pumps are particularly rugged and can operate in the ...

Model G Series - Motor Driven Dosing Pumps

by Milton Roy Europe     based in PONT SAINT PIERRE, FRANCE

Series G™ dosing pumps are electric motor-driven pumps with mechanical diaphragm liquid ends. Simple, economical and rugged, they offer great flexibility and a wide selection of liquid ends compatible with most chemicals. With a corrosion-resistant plastic or aluminium housing, depending on the model, they are based on two technologies ...

Verderflex - Model Dura 45 - Industrial Peristaltic Hose Pump

by Verderflex Peristaltic Pumps - part of the Verder Group     based in Castleford, UNITED KINGDOM

The Verderflex Dura 45 is the pathfinder in a new generation of medium flow, industrial hose pumps. A product of intensive engineering investigation, with genuine class-leading performance, the Verderflex Dura 45 combines a close-coupled pump’s compactness with a long coupled pump’s easy serviceability. Additionally, its innovative, ...

ADS - Polymer Mixing and Dosing Unit

by AQUA-Zyme Disposal Systems, Inc.     based in Van Vleck, TEXAS (USA)

All components shall be mounted on a single skid constructed of 3″ channel iron and 3/16″ carbon steel plate. Dimensions of the complete unit shall be 78″ L x 78″ W x 69″ H. Unit shall be constructed such that the forks of a fork lift can be inserted into the base of the skid to allow the entire unit to be moved. Skid ...

Verderflex - Dura 55 Peristaltic Industrial Hose Pumps

by Verderflex Peristaltic Pumps - part of the Verder Group     based in Castleford, UNITED KINGDOM

The Verderflex Dura 55 is the class leader for this size of peristaltic pump, significantly outperforming its competitors in both continuous and intermittent duty applications. 

Chemical Dosing Machine

by Doyen (China) Machinery Co., Ltd     based in Foshan, CHINA

JY serial chemical dosing machine has functions of feeding, dissolving, blending and adding chemicals, it is composed of powder auto-putting machine, stainless steel dissolving box, stainless steel blade stirrer, chemical dosing pump and other accessories including Y type filter, flow meter, electromagnet valve, liquid level controller, etc., This ...

NEMO® - Model C.Pro - Universal Dosing Pump

by NETZSCH Pumpen & Systeme GmbH     based in Waldkraiburg, GERMANY

The NEMO® C.Pro Dosing Pump is a fully synthetic pump for the precise dosing of a great variety of chemicals in environmental technology and the chemical industry. Its synthetic construction makes it perfectly suited for the gentle and low-pulsation conveyance and dosing of aggressive or non-aggressive chemicals. With only six main parts, ...

REIFOMAT - Model 500 - Fully Automatic Dissolution and Dosing for Liquid Polymers

by REIFLOCK Abwassertechnik GmbH     based in Baden-Baden, GERMANY

REIFOMAT 500:more successful Fully automatic dissolution and dosing for liquid polymers . In order to operate an economic sludge dewatering, is an ideal polymer preparation and dosing the basis for all sludge dewatering equipment Before polymers can be used, they must be solved and invert, ie, the ionic charge carriers are first prepared by ...

Liberty - Model LL2 Series - Polymer Feed and Chemical Injection Pump

by Liberty Process Equipment, Inc.     based in Arlington Heights, ILLINOIS (USA)

The LL2 PC Pump is an ideal low-flow Progressive Cavity Pump for polymer feed, chemical feed and sampling/dosing applications. The LL2 design has been in use in the chemical injection and wastewater polymer feed now for decades by offering precise, pulseless fluid injection control that only a PC Pump can provide polymer injection in wastewater ...

Amston Filter Press For Dewatering Sludge

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

The Amston filter press is a recessed plate pressure filter used for dewatering sludge. A low dose of polymer is often required to assist dewatering. The Amston filter presses require a lower polymer input than belt presses due to their use of higher pressures and finer cloths.

Polymer Machines

by NOXON AB     based in Fjärås, SWEDEN

Noxon’s polymer machines consists of communicating vessels. This allows continuous withdrawal of polymer solution as preparation starts automatically as soon as the amount of solution sinks to a pre-set level. This ensures reliable operation.

Hire of Chemical Dosing Systems

by SNF Group of Companies     based in Riceboro, GEORGIA (US) (USA)

FloQuip hire chemical dosing systems to customers who either have a short term requirement for chemical dosing equipment as part of a process enhancement or change, or as a replacement for equipment which has come to the end of it’s useful life. FloQuip carry an extensive range of pumps, emulsion and powder make-up and dosing systems ...

Model AF Series - Polymer Make-up System

by AMCON Inc.     based in Yokohama, JAPAN

The AF Series polymer make-up system is designed to dissolve liquid polymer, which are used for sludge dewatering and various other wastewater treatment systems, automatically to the specified concentrations of polymer. Automation of dissolving work will drastically save labor cost.

Model VA - Polyprep 2KB - Polyelectrolyte Preparation Plants

by W AT GmbH-Wasser Abwassertechnik GmbH     based in Linz, AUSTRIA

Tank consisting of preparation chamber, ripening chamber and dosing chamber, stainless steel agitators and level switches as required and/or requested. Dry polymer feeder, dosing screw speed constant. PVC water piping system consisting of ball valve, pressure reduction valve with filter, solenoid valve and water meter in supplier standard. Polymer ...

Liquid Polymer Chemical Preparation Equipment (LCP)

by Richard Alan Engineering Ltd     based in Dewsbury, UNITED KINGDOM

The Richard Alan Engineering LCP range of emulsion polymer preparation equipment offers a high quality, efficient and economical solution for producing a homogenous polymer solution. We manufacture and supply a fully automated system for effectively mixing liquid polymer with water. Neat liquid polymer is pumped with a variable speed diaphragm ...

Model DS-M Series - Peristaltic Pumps

by BOMBAS BOYSER, S.L.     based in Sta. Eulàlia de Ronçana, SPAIN

Fluid handling pumps and equipmentThe operating principle of a peristaltic pump attracts by its simplicity and advantages. A tubular element with accurate dimensions, made in different types of elastomer or thermoplastic, is housed into the pump body. When this tubular element is compressed by the rotary action of the rotor and its corresponding ...

Toro Equipment - Model PAPE Series - Emulsified Polyelectrolyte Preparation Plant

by Toro Equipment S.L.     based in La Cistérniga, SPAIN

The Emulsified Polyelectrolyte Preparation Plant (PAPE) of Toro Equipment is an automatic and compact equipment where takes place the maturation-dosage of liquid polymers.

Titanium Centrifugal Pumps

by Titanium Tantalum Products Ltd     based in Chennai, INDIA

TiTaN's centrifugal pump consist of rotating vanes, enclosed within a housing or casing, used to impart energy to a fluid through centrifugal force. Liquid ring vacuum pumps are used for handling wet gas mixtures. Chemical liquids handling applications such as high-pressure additive injection in oil production and transferring thick, ...

Teknobag-Draimad Package - Package System

by Teknofanghi S.r.l.     based in Cernusco, ITALY

To satisfy the request of the market, some years ago we introduced the “package” systems to the TEKNOBAG-DRAIMAD range. This system is a complete and very compact dewatering plant, equipped with a bag-module, polymer preparation unit, polymer dosing pump, sludge feed pump, inline mixer, level probe, control panel and all else necessary ...

Related Terms for polymer dosing pump

Need help finding the right suppliers?

Let the XPRTs do the work for you