Water Contaminants Applications available in Micronesia
-
Premium
Ozone generators for industrial application
Disinfection of industrial and chemical freshwater, process water and cooling water. Disinfection, detoxification, decolouration and deoderization of industrial wastewater and improvement of its biodegradability. Oxidation of industrial off gasses. Chemical ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Flowing Waters - Irrigation & Drainage Systems solutions for Contaminated Groundwater Flow Measurement
Application: Trapezoid channel 1.5 x 0.5 m (w x h). Partially filled. Concrete channel bottom, embankment reinforced with water engineering stones. Remote measurement ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Water Testing for Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Industrial solutions for cooling water contamination
Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Water treatment solutions for the mining & metallurgy industry
Contaminated mine water is generated when rock containing sulphidic minerals is exposed to water and oxygen, resulting in the production of acidity and high concentrations of metals and sulphate in the water. Mine drainage, process water and storm water associated with industrial activities are the main types of water produced in mining operation. The two primary aims of the treatment of contaminated mine water are to neutralize acidity and removal metals. Lenntech provides sustainable complete water treatment ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Water and Wastewater Treatment Systems for Health
Water, which draws attention as it ranks first among the basic needs of all of us, creates a serious ecological and biological danger when it is not hygienic enough. Being aware of this, water treatment systems are produced. This is important in terms of health. Water purification systems are used in almost every sector. Especially in places such as hospitals, it is not sufficient for the water in certain units to be clean only. ...
By Zetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Premium
Industrial solutions for ultrapure water monitoring
Problem: Trace contamination in ultrapure water (UPW) can have detrimental effects on a manufacturing process in Semiconductor, Power Generation and Pharmaceutical industries. Onsite treatment is conducted to further remove trace impurities from source ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Heat Exchangers Solutions for for Waste Water Industry
Waste water can take many forms, from relatively clean water which has been used for heating, cooling or minor processing, through to heavily contaminated water and sludge generated by industrial processes and cleaning activities. The recovery of valuable materials from waste streams, together with the treatment of fresh water sources to prevent product or equipment contamination are key processes which can help make the difference between economic success and ...
By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.
-
Premium
Water and Wastewater Treatment Systems for Textile
Textile industries are water-intensive and large amounts of water are used in textile manufacturing processes. Almost all dyes and chemicals are applied to textiles in water baths. Preparation steps such as desizing, washing, bleaching and mercerizing generally use aqueous systems. The importance of water in textiles is noted by the textile industries in India and China, their use of local water supply, and the mixing of untreated wastewater, which is composed of fats, oils, colors and other chemicals added in a ...
By Zetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Premium
Analytical Instruments for Analyzing by-Products, Effluents and Waste
Discover analysis and sample preparation solutions for environmental sum parameters like TOC, AOX, EOX, TX, TOX, TC, TS and many more, for cooling and waste water, contaminated soil, brine, and other process relevant matters like catalysts, waste oil, residues among others. These solutions can be applied in environmental protection, industrial self-control for effluents, recycling, regeneration, and ...
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Real-time turbidity and total suspended solids sensors solutions for agriculture industry
Phathom sensors can be used in a wide range of agricultural settings, including horticulture, livestock farming and crop farming. Applications include monitoring turbidity and suspended solids in wastewater and service water at influent and discharge, and monitoring stormwater sediment ...
By Phathom based in Pukekohe, NEW ZEALAND.
-
Premium
Incinerator solutions for the marine waste sector
Storage of waste while at sea can take up valuable space. Using one of our on-board marine incinerators you can free up this space for more profitable activities or to simply provide more ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Wastewater treatment management for storm water treatment industry
Aging treatment and collection systems in developed countries and the lack of appropriate treatment systems in developing countries along with higher precipitation levels occurring over short periods of time are driving government and industry leaders to expand or upgrade stormwater treatment systems to keep surface water bodies clean, while using this collected water for use in non potable ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for metals processing
Metals processing industries employ large, critical assets, the reliability of which is absolutely essential to their business model. An undetected failure of a piece of processing equipment such as a rolling mill gearbox, or a 1000 ton extruder press not only involves the cost of equipment repair and line downtime, but the product quality may be severely impacted. Today more than ever, there is also less redundancy. Oil analysis is a critical aspect of a reliability based maintenance program, and for many large ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Biotrickling filter and bioscrubber for biological exhaust air cleaning
Structured packings for biological processes. With the biological elimination of odors, a better efficiency can be achieved with less effort and less use of chemical agents than in a purely chemical-oxidative process. ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
Machine condition monitoring for labs & services
Overview Machine condition monitoring using oil analysis is widely practiced by virtually every segment of modern industry that maintains large, expensive, oil-lubricated machines. In many cases, especially in smaller plants or enterprises, samples are sent to commercial oil analysis laboratories that can help monitor machinery ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Indoor air quality treatment solutions for hotel / hospitality industry
We has successfully designed and installed solution to integrate and retrofit with the present and conventional system with proven and time tested ozone based technology. Its technology integration gives buy back of CapEx in reasonably short period depending upon the application and customised solution. Ozone is one of the most advance technologies and can be integrated with great advantage in treatment of Water, Waste Water and air treatment in hotel. Ozone Generator is use for Hotel Indoor Air & Water ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Wastewater treatment management for humanitarian industry
According to the World Heath Organization (WHO), more than one billion people lack access to safe drinking water and sanitation worldwide, and for this reason, water borne illness has become the leading cause of death. In fact, water borne disease kills more than 3.4 million people each year due to lack of clean water and sanitation treatment. Mobile water treatment systems solve these water contamination issues and save lives across the ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you