Water Contamination Equipment For Water And Wastewater Available In Georgia (US)
-
ShowcaseManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very little maintenance ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilsorb Dryer Filter Cartridges quickly and effectively remove solid and water contaminants from hydraulic, lube and insulating oils. The PD cartridge is made with a patented four-ply construction and is available in two efficiency ...
-
PremiumManufactured by CETCObased in USA
SHORE PAC is an easy mixing, water soluble, polymer supplied as a granular powder. SHORE PAC is designed for preparation of viscous earth-reinforcing fluids or slurries for a variety of ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Electrodeionization or EDI, is a continuous and chemical-free process of removing ionized and ionizable species from the feed water using DC power. EDI is typically used to polish reverse osmosis (RO) permeate and to replace conventional mixed bed ion ...
-
PremiumManufactured by Labconco Corporationbased in USA
RapidVap N2/48 Evaporation Systems use nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once. A stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. ...
-
PremiumManufactured by CETCObased in USA
Our second finest grain media, ORGANOCLAY PM-199 features high adsorption capacity of oils, greases, and other NAPL. When used as an in-series filtration media prior to an activated carbon vessel, ORGANOCLAY PM-199 extends the life and adsorbency of the activated carbon by removing larger molecular organics that can cause fouling. ORGANOCLAY PM-199 also works as a standalone treatment media to ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Vinyl Ester Polymer Concrete No. 410 is a vinyl ester castable for chemical-resistant construction of sumps, dikes, containment areas, trenches, walls and other structural support columns or bases. No. 410 has been specifically formulated for independent foundation construction and should be installed with proper reinforcement. Mixing, forming and finishing will proceed with similar ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Total Dissolved Gas (TDG) is the sum of the partial pressures of all gases in a water sample. Normally, the sum of gas partial pressures will be about one atmosphere (15 psi) for any water that is exposed to the atmosphere. The partial pressure of each gas will be the same as that’s gas’s contribution to atmospheric pressure, i.e. about 20% oxygen, 79 % nitrogen, and 1% trace gases. ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s Conductivity probe sensor provides rapid real-time measurement of conductivity and salinity in water or wastewater. This compact and robust conductivity probe sensor is available as a submersible probe for open channel wastewater installations or as a bypass style sensor for pressurized water installations. Parameter(s): Conductivity, ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoCrete - Fast Patch No. 149 is a three-component, fast setting epoxy monolithic that is designed for patching cracks and holes. This material is ideal for use on highways, bridge decks, docks, ramps, traffic aisles, industrial floors and airport runways. Fast Patch No. 149 produces extremely high strengths and takes an initial cure in just two ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Epoxy NovolaK Polymer Concrete 265 is a castable for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 265 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods are similar to those used for Portland cement ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Fluorescent dyes like Rhodamine are often added to water systems to provide water discharge and velocity data. Dye tracing studies can provide useful information for modeling surface and groundwater systems in addition to tracing contaminants. Fluorometers allow researchers to measure ultra-low concentrations of dye. The sensors extreme sensitivity and instrument flexibility allows researchers ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen NovolaK Vinyl Ester Polymer Concrete No. 465 is a castable for the construction of chemical-resistant sumps, dikes, containment areas, trenches, walls, and structural support columns or bases. No. 465 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming methods are similar to those used for Portland cement. ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Chemical-Resistant Castable No. 35 is a gunitable, hydraulicallysetting, calcium aluminate cement. No. 35 is recommended for protection of concrete and steel surfaces from high temperatures, thermal shock, abrasion and chemical attack by mild acids or alkalies. No. 35 can eliminate costly firebrick or tile linings and is equally effective for new construction or rehabilitation ...
-
PremiumManufactured by CETCObased in USA
Your first choice for removing organic contaminants from water or sediment, the ORGANOCLAY product range provides formulations to meet almost any adsorption application. Used and trusted worldwide, it's proven to work efficiently and ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s bypass Spectrum sensor provides real-time measurement of organic matter, nitrate and other compounds in water or wastewater. Real Tech’s Spectrum sensor utilizes UV-VIS light for measurement, continuously scanning the water across multiple wavelengths. Designed to meet the needs of many monitoring applications, the GL series offers multiple flow cell designs and sensor ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard Glaze 210GL is a protective coating specifically formulated for municipal wastewater environments. SewerGard Glaze provides a chemical-resistant barrier for concrete and steel. It may also serve as a sealing topcoat over other Sauereisen restorative materials and protective ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
The Justrite WashDown QuickBerm is constructed from durable EnGuard™V, modified PVC coated fabric reinforced with radio frequency-welded, high visibility yellow runway strips that withstand drive-thru traffic, including backhoes and skid steers. Removable 4-in (102-mm) diameter foam inserts support sidewalls while 2-in H x 8-in W (51 x 203-mm) planks (not included) slide into pockets to ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Powerful high-end touchscreen correlator designed specifically to find leaks on large diameter pipes over long distances – intelligent, non-intrusive and user-friendly. This correlator is currently the most advanced correlator in the ...
-
PremiumManufactured by Labconco Corporationbased in USA
RapidVap N2/48 Evaporation Systems use nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once. A stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you