Water Covers Equipment For Water And Wastewater Near Australia
-
Manufactured by RKI Instruments, Inc.based in USA
The RKI M2A is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A ...
-
Manufactured by Global Spill Controlbased in AUSTRALIA
Water Filled Drain Protectors in included products are Drain cover water filled - 1m x 1m - PCBWF1x1, Drain cover water filled - 1.5m x 1.5m - ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RKI M2 is a state-of-the-art transmitter that can operate as an independent, stand-alone system or as part of an integrated system. The M2 connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and LCD menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2 ...
-
Manufactured by Fabtech SA Pty Ltd.based in AUSTRALIA
Floating covers must function correctly at all operational water levels, hence their oscillating design. The key to achieving a well-balanced oscillating floating cover is to ensure that the tension of the cover is maintained at all times. Ballast lines bordered by floats must be configured correctly so that as the reservoir fills, the ballast lines the excess material and forms rainwater sumps. ...
-
Manufactured by Fabtech SA Pty Ltd.based in AUSTRALIA
Anaerobic systems incorporate the use of flexible membrane covers to collect methane gas. This methane gas is collected from around the perimeter via a perforated piping system and then processed in either flaring or co-generation. Specially designed weights and floats are attached to the cover membrane, which cause the horizontal ‘planes’ or ‘plates’ of the cover to be ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.01 – 10 mg/l. Disinfection of swimming pool water with the application-optimised DULCOTEST sensors for total available chlorine - exact measured values and high process reliability ...
-
Manufactured by Gorman-Rupp Co.based in USA
The self-priming centrifugal T Series® is the standard for industrial and sewage applications. The heavy duty construction and easy-to-service design have made Gorman-Rupp T Series pumps the standard in the industry. The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the exact requirements of your system, ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The BioCap® is designed to store the waste bio gas produced in the digesters. The cover is also designed to impart a pressure to the bio gas to enable reticulation of the bio gas to the appliances which will utilise the bio ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The CleanSweep roller brush combats the Algae problem in clarifier launders head on. The CleanSweep approach divides the launder trough in to five zones with a dedicated roller constantly cleaning each zone. Combining a unique bristle design with a retarding rotational force acting directly on algal growth, Hydroflux Epco have designed a system that keeps operators out of the trough, reduces the ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The CoverSweep launder covers eliminate problems associated with excess algal growth in clarifier launders. The CoverSweep system is a series of interlocking fibreglass or stainless steel hatches allowing access to the entire trough if required, yet all the while blocking 100% of sunlight across the launder trough, effluent weirs and scum baffle. The major benefit of CoverSweep launder covers is ...
-
Manufactured by Fluence Corporationbased in USA
End-to-end project finance water and wastewater solution for hotels, resorts, industrial parks and property developments and municipalities. Everything Covered Water 360 comes with the backing of one of the world’s most seasoned and proficient water services teams with extensive experience in Build, Own, Operate (BOO), Build, Operate, Transfer (BOT) and Build, Own, Operate, Transfer (BOOT) ...
-
Manufactured by Atarfilbased in SPAIN
ATARPOL RSP is a reinforced PP geomembrane manufactured from maximum quality polypropylene PP resins containing a polyester scrim, duly contrasted, that comply with the most rigorous requirements established for their use. ATARPOL RSP contains 97,5% of pure polymer, and approximately 2,5% of Carbon Black, antioxidants and thermal stabilizers. The product does not contain plasticizers or fillers ...
-
Manufactured by Atarfilbased in SPAIN
Non Woven Geotextile - GTX NWFlexible and permeables sheets made with non woven fibers or yarns. Non woven - Needle Punched, cut fibers geotextiles for protection, filtration, separation, drainage or reinforcement applications (see also woven Geotextiles and ...
-
Manufactured by Earthlee Pty Ltdbased in AUSTRALIA
Earthlee PondCovers are flexible, removable effluent pond covers that operate as an anaerobic digester, floating on an effluent pond or open top tank to collect biogas and harvest rain water. Designed to float on top, as stores are filled and emptied during the year, the system will rise and ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Ammonia Analyzers. Tethys Instruments is the specialist of ammonia measurement in gas phase or in water phase by UV spectroscopy with more than 20 years of experience. For gas phase, EXM400, CEM400 and CEM500 ammonia analyzers cover DeNOx applications and special process applications. For water phase, applications concerns mainly industrial and municipal waste water treatment plants that are ...
-
Manufactured by Gale Pacific Commercialbased in USA
A premium polyethylene scrim reinforced polyfabric, specifically designed for floating cover and liner applications. Lightweight, flexible and durable Aquacon™ 345 exhibits class leading welding characteristics, providing effective and efficient field welding performance, ideal for in-factory fabrication and deployment ...
-
Manufactured by Williames Pty Ltdbased in AUSTRALIA
Williames Watering Tunnels are designed to water the tray after it has been filled, seeded and covered. Water is sprayed across the width of the tray as it is passed underneath by a conveyor belt. A variety of interchangeable attachments are available, depending on the volume of watering ...
-
Manufactured by Steelfab Global Pty Ltd.based in AUSTRALIA
Commercial and Industrial water tanks can cover a wide range of applications. Some of these may include: potable water tanks, rainwater tanks, waste water treatment tanks, RO water tanks, process water tanks, and in some cases chemical storage tanks and fuel storage tanks. SMART TANKS and reservoirs can be modified and designed to your custom parameters to ensure that the tanks will fit into a ...
-
Manufactured by Evapco Inc.based in USA
The Advanced Crossflow Series (AXS) puts a new spin on induced-draft, axial fan, crossflow cooling technology with features designed for simplified maintenance. Crafted from decades of engineering know-how, EVAPCO's AXS cooling towers feature state-of-the-art induced draft, crossflow technology to deliver superior operating advantages in any climate. From performance to maintenance, they simply ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Our unique AirBeam™ cover provides wastewater treatment plants with a simple and efficient modular panel design that integrates structural supports and air distribution systems to form a superior digester cover. For those facilities that operate in colder climates, Ovivo's Enviropquip® AirBeam cover is capable of reaching higher digestion tank ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you