NO-analyzer News
-
IPP&T Features TOC analyzer
Those responsible for managing wastewater run-off treatment from commercial or private airports, aerospace industry facilities, military bases and chemical processing plants will want to learn more about how the advanced Total Organic Carbon (TOC) Analyzer from Electro-Chemical Devices (ECD) helps them manage ethylene glycol and other waste streams to safeguard water resources. While primarily ...
-
Increased oil In water measurement capability with new InfraCal 2 Analyzer
The new InfraCal 2 Analyzer, recently introduced by Wilks, for oil in water measurements offers additional features to the already established and widely-used line of InfraCal TOG/TPH Analyzers. These features include increased sensitivity for sub-ppm measurements, multiple calibrations, unlimited data storage, optional internal battery pack, and password protected instrument settings, as well ...
-
On-Site Sub-ppm Oil in Water Measurements in Less Than 15 Minutes
The new InfraCal 2 Field Portable IR Analyzer can measure down to 0.1 ppm oil in water accurately, on-site and in less than 15 minutes. It is the newest addition to the Wilks line of rugged, easy-to-use oil in water/soil analyzers and provides added sensitivity and features for today’s most challenging environmental applications. InfraCal 2 is ideal for non-technical users and will provide ...
-
Fats, Oil and Grease Levels in Wastewater Measured On-Site in Under 10 Minutes
Stricter wastewater regulations worldwide are aimed at ensuring excessive levels of fats, oil, and grease (FOG) in wastewater are not being discharged. The InfraCal TOG/TPH Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to help regulators and industry reduce the discharge and build up FOG in sewers. These analyzers are ideal for use by publicly operated treatment centers ...
-
Evolution of the TD-550 and TD-560 Oil in Water Analyzers
In the 12 years since the TD-500D analyzer was first released, there have been significant improvements in LED and photodiode technologies. In 2016 Turner Designs Hydrocarbon Instruments released the TD-120 Oil in Water Monitor for cooling water and steam condensate processes. This new monitor features an LED and photodiode-based optical kit, like the TD-500D before it. When coupled with improved ...
-
Portable Infrared Analyzers Help Ensure Compliance with Oil in Water Effluent Discharge Levels
Oil in wastewater discharges are highly regulated and each region of the world has their specific regulations. For the off-shore oil industry regulating bodies such as the NPDES(National Pollutant Discharge Elimination System) in the US have strict ppm limits that are coupled with costly fines for non-compliance. On-shore industrial wastewater producers also have limits imposed either by the ...
-
Measuring hydrocarbon levels in wastewater in under 15 minutes
Determining total hydrocarbon or oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem facing numerous industries. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total hydrocarbon concentration. Wilks ...
-
Measuring oil/grease levels in wastewater for compliance with permit requirements
Determining total oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem facing numerous industries. To ensure compliance with regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease concentration. Wilks Enterprise, Inc. ...
-
Compliance with discharge permits for oil in water
Determining total oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem for the oil and gas industry. To ensure compliance with regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease (TOG) concentration. Wilks Enterprise, Inc. ...
-
Portable IR Analyzers Measure Fats, Oil and Grease Levels in Wastewater
With stricter wastewater regulations facing all industries, it is important to ensure excessive levels of fats, oil, and grease (FOG) are not being discharged. The InfraCal TOG/TPH Analyzers provide accurate, easy on-site analysis to help regulators and industry reduce the discharge and build up FOG in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is ...
-
On-site measurement of fats, oils and greases in wastewater in under 10 minutes using portable IR analyzers
InfraCal TOG/TPH Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to assist regulators, as well as industry, to reduce the build up of fats, oils, and greases (FOG) in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is important to locate and monitor sites that are suspected of dumping high levels of FOG into the sewer line. In ...
-
Comply with Highly Regulated Oil in Water Measurements
The Petroleum Industry – both offshore and onshore -- has regulations that limit the amount of oil in discharged water. Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on drilling platforms for over 45 years. On oil rigs where real estate is at a premium, infrared analyzers such as the Wilks InfraCal Analyzers are compact (typically 6 inches or 15 ...
-
Eco-Friendly CA-6 Colorimetric Analyzer Helps Verify Copper Removal from Industrial Wastewater
With its adjustable cycle time that minimizes costly reagent use and low maintenance, process engineers tasked with treating industrial wastewater containing copper (Cu) will find the precision CA-6 Colorimetric Copper Analyzer from Electro-Chemical Devices (ECD) helps them protect valuable water resources. ECD’s CA-6 Copper Analyzer is an on-line sequential sampling analyzer. It ...
-
Measuring oil/grease levels in water to help oil/gas industry comply with permit discharge regulations
Determining total oil/grease levels to ensure compliance with governmental regulatory permit requirements for discharging wastewater is a worldwide problem facing all segments of the oil and gas industry. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease ...
-
Monitoring Total Carbon for straightforward management of runoff from de-icing episodes at airports
During winter operations vast areas of airport runways, taxiways, and aprons are cleared of ice and snow using acetate type chemicals and airplane wings are de-iced with glycol based antifreeze. During these seasonal de-icing episodes the runoff water suddenly becomes heavily contaminated with organics and needs to be diverted to a treatment/recovery plant or holding ponds. Total Carbon (TC) is ...
By Metrohm AG
-
On-Site Oil in Water Measurements Ensure Compliance with Discharge Permits
Determining total oil in water levels for compliance with governmental regulatory permit requirements for discharging wastewater is a worldwide problem facing all segments of the oil and gas industry. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease ...
-
TD-500D Hand Held Oil in Water Analyzer stands ready around the world for immediate service
The discharge of oil into water, land, or storm water drains can be very harmful to our environment. Recent oily water discharges and oil spill incidents raised the concern about oil pollution to marine waters. Many countries have taken action setting up surveillance systems including vessels and aerial surveillance aircrafts for pollution prevention and instant reactions. Turner designs ...
-
New video on the InfraCal TOG/TPH Analyzers for measuring fats, oil and grease in wastewater
We have just completed a new video on our InfraCal TOG/TPH Analyzers for measuring fats, oil and grease levels in water and wastewater, as well as TPH in soil. We hope you will take a few minutes to view this video and share it with others in your organization who may have a need for easy, on-site measurements of this type. The following are links to access the video: On our website On ...
-
White Paper covering Emulsion-Breaking Techniques for Accurate Oil in Water Measurements published by Wilks Enterprise
East Norwalk, CT – A White Paper entitled, “Emulsion-Breaking Techniques to Ensure Accurate Oil in Water Measurements,” was recently published by Wilks Enterprise, Inc. Certain water samples, such as those containing detergent, may form an emulsion when oil in water extraction into a solvent is done. In order to ensure an accurate measurement, the emulsion must be broken. The ...
-
Measuring oil and grease levels in wastewater
Industrial and food processing plants that have high levels of fats, oil and grease (FOG) in their effluent are faced with stricter wastewater regulations to avoid accumulations of FOG that cause sanitary sewer overflows (SSO). InfraCal Analyzers provide accurate, easy on-site analysis to help both regulators and industry reduce excessive oil/grease discharges and comply with permit ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you