Water Distribution Irrigation (Water Distillation) Equipment
-
Manufactured by ADG Valvebased in FRANCE
Applications : Drinking water distribution, watering & irrigation. MWP : 16 Bars. Working temperatures : -20°C to ...
-
Manufactured by Castflow Valves SLbased in SPAIN
Dual plate, spring loaded, wafer style design for the protection of gas or liquid piping systems. Pumping stations and networks for clean water distribution, irrigation (filtered water). Fire protection networks. Air-compressors. Applications with different fluids (to be consulted). Ensuring the protection of pumps against flow ...
-
Manufactured by Energy Management System Co., Ltd.based in TAIWAN
Best choice for Water Distribution Network, Irrigation, Waste Water Treatment, and Industrial water ...
-
Manufactured by Energy Management System Co., Ltd.based in TAIWAN
Best choice for Water Distribution Network, Irrigation, Waste Water Treatment, and Industrial water ...
-
Manufactured by Proinvalbased in SPAIN
Proinval butterfly valves BVP-79R with grooved ends, allow the regulation and stoppage of flow in installations against fire, supply and distribution of water, irrigation and air conditioning ...
-
Manufactured by Molecor Tecnologia S.Lbased in SPAIN
Water mains and distribution systems, irrigation conduits, agricultural installations, livestock installations, cold water conduits in the following industries: construction, food and drink, chemical, shipbuilding and mining, domestic water intakes, gardening, ...
-
Manufactured by Torishima Pump Mfg. Co., LTDbased in JAPAN
Energy Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire-Fighting. General Industy : Water Intake, Distribution, Boosting, Circulation, Drainage, Seawater Desalination, Fire-Fighting. Building : Water Supply. Drainage. District Heating and Cooling . Waterworks : Water ...
-
Manufactured by Electronet Equipments Private Limitedbased in INDIA
Electronet Utility series ELMAG® - 25 are micro-controller based full bore type electromagnetic flow meters specially used for various Industrial/Irrigation/Water distribution applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to its simple and rigid design, the flow ...
-
Distributed by Fluid Pumps Ltdbased in UNITED KINGDOM
End suction pumps have a wide range of types for both industrial and domestic applications, in a number of materials to suit your ...
-
Manufactured by AB Valves GmbHbased in GERMANY
Large orifice air valves are recommended as part of safety system for large diameter and long pipe lines. Under normal condition (positive pipeline pressure) this air valve is fully closed, it serves as vacuum breaker when the internal pressure in the pipe drops to negative value. For example in case of a pipe burst situation with very rapid medium drainage, a huge volume of air is insert to the ...
-
Manufactured by Cepexbased in SPAIN
Cepex offers two ranges of PP compression fittings: Performance Series and Standard Series. Both are made according to standards EN 712 / 713 / 715 / and ISO 3501 / 3503 / 3458 /3459, and are suitable for installation on PE pipes conforming to ISO 11922; DIN 8072 / 8074; and UNE 53131. These fittings allow for a quick, simple insertion of the tube, considerably reducing installation time: simply ...
-
Manufactured by Talleres Mecánicos Herbebased in SPAIN
The RD valve is a wafer disk check valve for assembly between UNE-EN-558 Series 49 flanges. This valve is to be used “all/nothing” (“on/off”). In other words, it must be completely opened, so it should never be used to regulate volume flow, since it was prematurely wear out the inner elements and lead to valve failure. Available in standard materials such as Carbon Steel, ...
-
Manufactured by Talleres Mecánicos Herbebased in SPAIN
The DC valve is a dual-plate wafer check valve with EN-558-1 or API 594 design, and for assembly between DIN, ANSI, JIS flanges, etc. Available in standard materials such as EN-GJS-400, Carbon Steel, CF8M, BRONZE, ALUMINIUM BRONZE, as well as special alloys AISI 904L, SUPERDUPLEX 5A, SUPERDUPLEX 6A, DUPLEX 4A, ...
-
Manufactured by Talleres Mecánicos Herbebased in SPAIN
The RDCR valve is a wafer disk check valve for assembly between UNE-EN-558 Series 52 flanges. This valve is to be used “all/nothing” (“on/off”). In other words, it must be completely opened, so it should never be used to regulate volume flow, since it was prematurely wear out the inner elements and lead to valve failure. Available in standard materials such as Carbon ...
-
Manufactured by Castflow Valves SLbased in SPAIN
Its application on high pressure pumping equipment is not only allowing a better dynamic performance but also a more durable design compared well other conventional check ...
-
Manufactured by Talleres Mecánicos Herbebased in SPAIN
The CP valve is an oscillating flap wafer check valve (without spring) for assembly between DIN, ANSI, JIS, etc. flanges. Its main feature is that the fluid passage diameter is off-centre from the pipe’s axis, meaning that the flap opens further, leading to lower head loss. Available in standard materials such as Carbon Steel, AISI 316L, BRONZE, BRONZE ALUMINIUM, as well as special alloys ...
-
Manufactured by Talleres Mecánicos Herbebased in SPAIN
The FP valve is a wafer oscillating-flap check valve (without spring) for assembly between DIN, ANSI, JIS flanges, etc. Available in standard materials such as Carbon Steel, AISI 316L, BRONZE, ALUMINIUM BRONZE, as well as special alloys AISI 904L, SUPERDUPLEX 5A, SUPERDUPLEX 6A, DUPLEX 4A, ...
-
Manufactured by Castflow Valves SLbased in SPAIN
Are used to strain the liquids that flow into the aspiration, and therefore avoid entrée of too big elements that can damage the pipeline. Are mainly connected to the check valves for application as foot ...
-
Manufactured by Croos Pump (Shanghai) Co., Ltdbased in CHINA
LLKV vertical single stage single suction inline centrifugal pump is a vertical type of LLKC pump. The performance of LLKV inline electric water pump and LLKC pump is same. And the impellers they used are also same. The impeller is directly mounted on the motor shaft. Comparing with the horizontal pump, vertical inline pump only requires ...
-
Manufactured by Franklin Electric Europa GmbHbased in ITALY
Compact close-coupled design, robust and rust resistant / Superior efficiency and performances. Flexible application base plate. Floating neck ring in AISI 304 and PTFE. Heavy duty oversize motor shaft. Impellers and diffusers are made of stainless steel in order to achieve durability. Easy maintenance. Possibility of removing the hydraulic stack without disconnecting from the pipelines. Strong ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you