Water Distribution Network Equipment For Water And Wastewater Available In Marshall Islands
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Fracta is a cutting-edge solution using machine learning and artificial intelligence to detect water leaks to anticipate water network maintenance and operations. The world is covered by millions of kilometres, then water monitoring is essential. As an eco-responsible player, we have to participate actively in the monitoring and management of water distribution, right up to the point of delivery. ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the HYDRO50R product line of High Purity Hydrogen Generator modules for FID and CARRIER GAS for GC, to fit almost any type of application which needs H2 production close to the consumer. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality distilled water (ZEROWATER). This process ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The SeFlow 400 is Sewerin’s single channel portable flowmeter for applications in the municipal water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas ...
-
Manufactured by Emiflex S.p.A.based in ITALY
Tube: austenitic stainless steel, thickness ≥ 0.21 mm. Male fitting: stainless steel AISI 303, UNI EN 10226-1 thread. Fitting for swivel nut: stainless steel AISI 303 with fl at sealing seat. Nut: nickel-plated brass CW619N with UNI ISO 228/1 thread. Treatment: subjected to annealing heat treatment after welding of the end ...
-
Distributed by Hozelock Ltdbased in UNITED KINGDOM
The Hozelock starter hose caters for those which are either starting up their new home and require a good quality product in the garden or for general use in the ...
-
Manufactured by MJK Automation - a Xylem brandbased in DENMARK
Logging data today is not just processing data such as oxygen, pH or levels. We measure and log data from reservoirs, lakes, rivers, streams, creeks, groundwater, surface water, harbors and many other places to help adapt and improve our infra ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
RH20 Handheld Ultrasonic Flowmeter is one of the most powerful flowmeters available for liquid flow measurement. The utilization of our proprietary ultrasonic signal processing, transit-time measurement and signal quality tracking technologies allows the flowmeter to measure liquid flow rate from outside of a pipe reliably and accurately. RH20 is carefully designed so that it is very compact and ...
-
Manufactured by Saint-Gobain PAMbased in FRANCE
The perfect ductile iron pipe for robust and flexible water distribution networks in all situations.Through knowledge gained by our dedicated research centre in areas such as soil corrosion phenomena, our ductile iron pipelines have the latest coating technologies and often exceed minimum industry standards. Our joints are also developed and tested here in the most extreme conditions. HYDROCLASS ...
-
Manufactured by Kimplas Piping Systems Private Limited - NORMA Groupbased in INDIA
Kimplas Compression fittings PN 16 and are designed to use with all types of Polyethylene Pipes i.e. HDPE, MDPE (grades PE100, PE80, PE63, etc) Unique design of the fitting facilitates insertion of the pipe into fitting without disassembling the fitting. The working temperature range of the fittings is - 5° to + 40:C and the fittings are recommended for cold water services only. The fittings ...
-
Manufactured by United Envirotech Pvt Ltd.based in INDIA
Energy efficient anaerobic technology for Distillery spent wash, Starch Waste Water and other agro-based Paper ...
-
based in ITALY
We are able to provide the most advanced and economical systems in the field of water and wastewater treatment. From water purification to distribution and reuse, we serve our customers with enhanced, efficient and reliable systems. In most industrial production activities, large quantities of water are used, which before being conveyed into the receiving water body, or before being reused or ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HydrINS® 2 flowmeter, developed by Hydreka, is an easily deployed and cost effective flowmeter providing highly accurate bi-directional flow measurement, for water distribution and raw water pipelines. The highly versatile unit is widely used throughout the world and available in various lengths, equally well deployed for permanent or portable ...
-
Manufactured by Future Pipe Industries (FPI)based in UNITED ARAB EMIRATES
Wavistrong H2O pipes are manufactured by Future Pipe Industries' (FPI) using a continuous filament winding technique that combines Glass Reinforced Epoxy resin (GRE), with a fiberglass-reinforcement and, when required, a pure silica sand filler. This custom technique gives the finished pipe a resin-rich reinforced liner, a strong structural wall and a resin-rich exterior ...
-
Manufactured by Reali Technologies LTD.based in ISRAEL
The Water distribution kit is the best tool to simplify and unify your Remote monitoring & Control of the entire water Distribution ...
-
Manufactured by AB Valves GmbHbased in GERMANY
Flanges : DIN EN 1092 – 2 (DIN 2501). Face to Face : DIN EN 558 – 1 series 14/15 (DIN 3202 – F4 & ...
-
Manufactured by Modern Water Inc.based in USA
LuminuHra's 2nd Generation ATP kits provide fast complete, and accurate insight into microbiological activity. Both portable and easy to use, the test kits provide an interference-free indication of total microbial quantity within minutes of sample collection allowing you to save valuable time, help you better manage risk and reduce operating costs. In addition, our highly skilled and ...
-
Manufactured by AB Valves GmbHbased in GERMANY
This valve is equipped with a bypass system and an on/off valve. bypass system is used for connecting both side of the disk for special applications . The usual diameter of bypass valve is approximately 1/10 of nominal diameter of main valve . For installation of bypass the face to face of the main valve is ...
-
Manufactured by Trimble`s Water Divisionbased in USA
The Telog IFM-32 flowmeter is an easily deployed and cost effective flowmeter providing highly accurate, bi-directional flow measurement for water distribution and raw water ...
-
Manufactured by Ovarrobased in UNITED KINGDOM
ENIGMA3hyQ is a variant of the ENIGMA3m multi-point noise correlation system. The ENIGMA3hyQ has been optimised for leak location over longer distances, on large diameter pipes and plastic pipes in water distribution networks. It is deployed in underground chambers and requires no costly above ground technology. Data is transmitted by 3G or GPRS. The ENIGMA3hyQ comes in two variants itself: with ...
-
Manufactured by Molecor Tecnologia S.Lbased in SPAIN
TOM PVC-O pipes are an exclusive product manufactured with Molecor ground- breaking technology, ensuring maximum molecular orientation. The manufacturing process is continuous and automated, with a quality control of each individual pipe, which guarantees the reliability of the product throughout the entire production ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you