Only show results in Virginia? Ok

Engineered Water Distribution (Water Distribution) equipment

  • Premium

    Model 2H TEP 130 / 2H TEC 130 / 2H TAP 160 - Drift Eliminators

    Modern re-cooling systems need to consider aspects of the environment and sustainability. For cooling towers this means it is important to reduce the loss of water and emissions. Therefore drift eliminators are used. They are installed above the water distribution and cooling fills and catch the water drops that are carried with the air flow and ...

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from Components for Agricultural Engineering Product line

  • Premium

    LumenAER - Solar-Powered Water Circulator

    This solar-powered circulator collects low-oxygen water from the bottom and exposes it to the surface for rapid oxygenation and distribution. The LumenAER® low-energy circulator provides an environmentally friendly solution to a variety of water quality problems that affect storm water, leachate, wastewater ponds, and lakes. It efficiently ...

    By Fluence Corporation based in White Plains, NEW YORK (USA). from Aeration Equipments Product line

  • IPEX AquaRise - Hot & Cold Potable Water Distribution System

    IPEX introduces AquaRise, a hot and cold potable water distribution system for commercial, industrial and high-rise buildings. Based on over 15 years experience designing and manufacturing industry-leading CPVC systems, AquaRise offers numerous benefits over metal with a system that’s fully approved for noncombustible applications. Like all ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Potable Water Distribution Product line

  • TUA Engineering - Model PR CH - Counter Top Hot & Cold Dispensors

    The PR CH are a compact range of counter top hot and cold water dispensors. Units are normally connected to a high quality water source such as our TPRO100SV or S800 domestic reverse osmosis. For large establishments a larger industrial reverse osmosis system can be provide and distribute to a number of PR CH units loacated in different locations ...

    By Tua Engineering Ltd. based in Paola, MALTA. from RO Systems Product line

  • Distribution Boxes

    Irish manufactured Concrete wastewater treatment system using the latest in German engineered SBR (sequential batch reactor) technology.

    By Murphy Concrete Products Ltd. based in Co. Wexford, IRELAND. from Waste Water Product line

  • Continuous Sand Filters

    Incoming water is distributed to the bottom of the filter and flows upward through the sand where it reaches the filtered water outlet at the top side of the filter. Simultaneously within the filtration process, the sand is migrating downwards and then lifted by an airlift to the top where contaminated sand is cleaned in a sand washer and the ...

    By Unidro SpA based in Milano, ITALY. from Engineered Products Product line

  • AquaBlend - Model FT - No - Shear Flocculation Tank Mixing System

    The EnviroMixAquaBlend-FT system provides mixing in water treatment flocculation tanks by firing programmed short bursts of compressed air through engineered patented nozzles. AquaBlend-FT controller air injection valves fire large (e.g., 4'0) gas volumes through a distributed nozzle array located across the tank floor. Compressed air is ...

    By EnviroMix based in Charleston, SOUTH CAROLINA (USA). from Water Product line

  • Central Water Supply Systems

    Central water supply systems often feature elevated tanks whose water table lies above the service territory. These elevated tanks help to offset fluctuations in consumption, maintain even pressure within the supply network, store water for fire-fighting purposes and act as a reservoir for booster stations. Elevated tanks have an important role to ...

    By KLAWA Anlagenbau GmbH based in Gudensberg, GERMANY. from Water Supply Product line

  • Composite Pressure Tanks & Distribution Systems

    High quality HDPE - fibre-free and good for all standard water treatment applications, including demineralisation. Filament wound epoxy / fibreglass outer laminate for top strength and performance. Precision molded threads or fibreglass flange for standard valves and fittings. Rated for 10 bars operating pressure at temperature of 50°C. All ...

    By INAQUA Vertriebsgesellschaft mbH based in Mönchengladbach, GERMANY.

  • Hunter Industries - Precision Distribution Control Adjustable Nozzles

    Whether dealing with hillside topography, a curved flowerbed, or other special landscape installations, challenging angles demand nozzles that adjust to their surroundings. Hunter Precision Distribution Control™ Adjustable Nozzles cover any angle needed on any landscape with the accuracy of a fixed nozzle. Engineered to emit larger than ...

    By Hunter Industries based in San Marcos, CALIFORNIA (USA). from NOZZLES Product line

  • Model GS101 - Distributed High Precision Land Seismograph

    GS101 distributed high precision land seismograph adopt the 32-bit high precision Σ -Δ ADC. It supports ten thousand channel 2D and 3D seismic exploration. The instruments contain industry PC, master station, cross station, acquisition station. The connection structure is very flexible and light. Exploration depth can reach from ...

    By Geospace Survey Services based in Littleover, Derby, UNITED KINGDOM.

  • CPVC Fittings

    Cepex has developed a range of CPVC fittings to complement its valves made in the same material and to increase the possibilities of installations with its products, achieveing with this to increase the temperature range of its installations up to 90ºC. For applications in: water transport: building technology, electronics, shipping engineer, ...

    By Cepex based in polinyá (Barcelona), SPAIN. from Water Products Product line

  • CETCO MONARCH - Model CPI & SCPI - Oil Water Separators

    Operation of the CETCO MONARCH CPI Separator is simple and efficient.  Liquid flow is introduced into the CETCO MONARCH CPI separator via gravity or at a specific pressure. The CETCO MONARCH CPI Separator distributes flow and creates the necessary laminar flow for proper oil & water separation. The CETCO MONARCH CPI Separator and its ...

    By CETCO Energy Services based in Covington, LOUISIANA (USA). from Produced Water Product line

  • High/Ultra Purity Water System

    For industrial processes that demand high or ultra-pure water. We offer a complete line of high and ultra-pure water systems designed for industrial environments. These systems are designed around the unique requirements of your process while maintaining a safe and economical set up that is flexible enough for future growth.

    By ProChem Incorporated based in Elliston, VIRGINIA (USA). from Water Purification Product line

  • EchoShore - Model DX Platform - Continuous Leak Detection Monitoring for Distribution Mains

    Early leak detection is vital for distribution systems, with the ability to identify system failure points before they impact customer service levels. When water resources are limited, early leak detection is a valuable tool in reducing non-revenue water and extending pipe asset life. The EchoShore-DX platform is a fixed leak detection technology ...

    By Echologics Engineering Inc. - a division of Mueller Canada Ltd. based in Mississauga, ONTARIO (CANADA).

  • Engine Recovery System

    THE PROPER MACHINE FOR A REAL ENERGY SAVING In order to recover pipe and for hydraulic movements this kind of machine employs a little diesel engine. The advantages of this systems consist of not absorving power from water and so this can be totally used for watering. The pressure losses of machine are reduced about 25/30% in comparison with an ...

    By Casella Macchine Agricole S.r.l based in Carpaneto P.no - Piacenza, ITALY. from Other Products Product line

  • Premium

    WesTech - Vertical Pressure Filters

    Filtration of Smaller Flows with Vertical Pressure Filters. Vertical Pressure Filters consist of a pressure vessel with an overdrain system for distribution of influent water and collection of backwash waste.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Filtration Product line

  • Scarab Merlin-XP - Model GVW 7.5 Tonne - Single Engine Roadsweeper

    GVW 7.5 Tonne - Single Engine Technology for a Cleaner World. The design brief for the Merlin-XP was to create a roadsweeper capable of extracting maximum efficiency and performance when mounted on a 7.5 tonne chassis. Because an auxiliary diesel engine pack only compromised an already precious payload capacity, we decided to rely on ...

    By Scarab Sweepers - Scarab-Fayat based in Tonbridge, UNITED KINGDOM. from 7.5 Tonne Road Sweepers Product line

  • Retrofit or Replace Your Underperforming Oil/Water Separator

    The Mercer International Multi-Pack™ coalescer system can fit into any existing concrete pit with ease to achieve the same results for which we design and test our standard line of separators. Our coalescers and engineered inlet and outlet flow distribution baffles are the common denominator for excellent effluent results.

    By Mercer International Inc. based in Mendham, NEW JERSEY (USA). from Retrofitting Existing Oil Water Separators Product line

  • Header Lateral System

    For the treatment of process water such as in ‘Ion Exchange’ and in the process of removing organic matter, CP Screens offers products such as the Header and Hub-Lateral Systems to uniformly collect and distribute process flow. Sizing of both the main header pipe and the screen laterals are based on recommended through-pipe and slot ...

    By CP Screens Pte Ltd based in Singapore, SINGAPORE. from Water Process & Treatment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you