Water Electrolysis Equipment For Water And Wastewater Available In Indiana
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG ST BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG ST BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The innovative drying system ensures the maximum grade of hydrogen purity, ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HG KUBE is able to generate up to 260 cc/min of Hydrogen with purity better than 99.9996% and pressure up to 9 bar (130 psi). The HG KUBE includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Tankhouse electrolyte flows through the Bismuth Antimony Removal System (BARS) for removal of bismuth and antimony. The system uses Recoflo technology and selective ion exchange resin for the removal. The resin is regenerated with a small amount of hydrochloric acid (HCl) and a catalyzed reducing agent. Recognizing that chloride can be a contaminant for the copper electrolyte, the system is ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG RACK 19” 2U BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG 2U 19 inch BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by Intecna srlbased in ITALY
Throughout the last ten years, several experimental works about the Ferrates laboratory and pilot production process and their application have been published. Ferrates showed a very high oxidant capacity, for the state of oxidation, especially for of the iron (VI) (SODIUM FERRATE), which sparked a remarkable interest in its applications both for disinfection and for especially difficult to be ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The PROCO 231/ET Lined Expansion Joints are designed for tough, demanding, corrosive chemical applications such as chemical and petrochemical process facilities and highly corrosive industrial piping and pollution control systems. Use of the 231/ET expansion joints is especially prevalent in the paper industry, where their ability to resist corrosive attack at elevated temperature and pressure is ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Wellprotect-D is a disinfectant with "hypochlorous acid, HOCl" as the main ingredient, and the ingredients are different from Wellprotect-S. Hypochlorous acid disinfectant is a substance made by electrolysis of water, and it is a disinfectant in the range of 60~80ppm, which is a safe concentration while having excellent sterilization power. The roots are sterilized immediately, and after ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HGA ST BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min. The HGA ST BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG PRO M can generate up to 20 L/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO M includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using ultra pure water. No acid or alkaline solutions are used. The two-column PSA drying system with automatic regeneration ensures the maximum grade of ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG RACK 19“ 2U PRO is able to generate up to 600cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG RACK 19 inch 2U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 443-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. This expansion joint features three convolutions and is designed for moderate movement and ease of system ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the HYDRO50R product line of High Purity Hydrogen Generator modules for FID and CARRIER GAS for GC, to fit almost any type of application which needs H2 production close to the consumer. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality distilled water (ZEROWATER). This process ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HGA RACK 19” 2U PRO is able to generate up to 600 cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min. The HGA RACK 19 inch 2U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG ST PRO is able to generate up to 600 cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG ST PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG ST ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 261R molded wide arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the Fidstation RC product line of High Purity Hydrogen & Zero Air generators with compressor to supply all gases necessary to aliment the FID detector, close to the consumer, in an elegant 19” casing with full color display and touchpad. The FID Station is composed of a High purity Hydrogen generator and an Ultra Zero Air generator with on board Air compressor. Based on ...
-
PremiumManufactured by Myron L Companybased in USA
The Myron L Pool Meter is designed specifically for the Pool and SPA Industry with “DUAL” Ranges. Scaled in both ranges: 0-5000 ppm of TDS (442), 0-5000 ppm of NaCl. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HGA RACK 19” 2U BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min. The HGA 2U 19 inch BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG 4U PRO is able to generate 2000 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 4U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 4U PRO ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 262R molded wide double arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you