Water Electrolysis Equipment For Water And Wastewater Near Massachusetts
-
PremiumManufactured by Proco Products, Inc.based in USA
The PROCO Series 450 Sleeve Type Pipe Connectors are used for tough demanding applications found in: Refridgeration Pump Systems, Industrial Process Piping Systems, Power Generating Plant Pump Systems, Pulp/Paper Plant Pump Systems, Water-Wastewater Sewage and control systems where lower pressure and sleeve ends are used in lieu of flanged spool type rubber expansion joints. The Series 450 Sleeve ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 442-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. This expansion joint features two convolutions for minimal movements, higher pressure/temperature ratings, and ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 445-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined rubber expansion joints were previously used, the ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The PROCO 231/ET Lined Expansion Joints are designed for tough, demanding, corrosive chemical applications such as chemical and petrochemical process facilities and highly corrosive industrial piping and pollution control systems. Use of the 231/ET expansion joints is especially prevalent in the paper industry, where their ability to resist corrosive attack at elevated temperature and pressure is ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 262R molded wide double arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 440 BE Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined rubber expansion joints were previously used, the ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 443-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. This expansion joint features three convolutions and is designed for moderate movement and ease of system ...
-
PremiumManufactured by Myron L Companybased in USA
The Myron L Pool Meter is designed specifically for the Pool and SPA Industry with “DUAL” Ranges. Scaled in both ranges: 0-5000 ppm of TDS (442), 0-5000 ppm of NaCl. ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Style 261R molded wide arch expansion joints have the lowest spring rates of any expansion joints currently on the market. They also boast low forces to deflect, and are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular and torsional ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Each Proco Series 300 Flanged Rubber Pipe Connector is specifically engineered for your particular application. Multiple plies of tough fabric and helical spring steel wire are embedded into the pipe wall during the manufacturing process, resulting in a product precisely designed for your pressure and vacuum ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Series 251/BT Lined Expansion Joints are designed for tough, demanding, corrosive chemical applications such as chemical and petrochemical process facilities and highly corrosive industrial piping and pollution control systems. Use of the 251/BT expansion joints is especially prevalent in the paper industry, where their ability to resist corrosive attack at elevated temperature and ...
-
Manufactured by Clariant International Ltd.based in GERMANY
Clariant’s EnviCat catalysts and Actisorb adsorbents address the high quality demands of technical gases, reducing the level of substances such as hydrocarbons, hydrogen, oxygen, carbon monoxide or sulphur compounds to minimal levels of a few ppm or even ppb. Building on decades of research and practical application, Clariant has developed products providing mechanical stability and ...
-
Manufactured by Edgetech Instruments, Inc.based in USA
The Edgetech Instruments PPM1 is a trace moisture analyzer for monitoring dew/frost point and ppmV water vapor in gases. The PPM1 is a modular, remotely mounted hygrometer configured to meet your moisture measurement application requirements. The PPM1 uses an electrolytic, phosphorus pentoxide sensor in combination with a proprietary semi permeable diffusion membrane. The principle of operation ...
-
Manufactured by Diamond Diagnostics Inc.based in USA
The Diamond Diagnostics Unity Integrated Electrolyte System is a fast and compact ISE module measuring Na+, K+ and Cl- within Serum, Plasma and Diluted Urine utilizing Ion Selective Electrode (ISE) technology. The Diamond Unity® is uniquely designed with a powerful microprocessor and integrated electronics allowing for easy integration into any size Chemistry Analyzer ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Tankhouse electrolyte flows through the Bismuth Antimony Removal System (BARS) for removal of bismuth and antimony. The system uses Recoflo technology and selective ion exchange resin for the removal. The resin is regenerated with a small amount of hydrochloric acid (HCl) and a catalyzed reducing agent. Recognizing that chloride can be a contaminant for the copper electrolyte, the system is ...
-
Manufactured by AvCarb Material Solutionsbased in USA
AvCarb® Molded Graphite Laminates (MGL) are superior carbon papers designed for electrolyzer and fuel cell applications. Available in stronger and thicker product formats than typical carbon papers, AvCarb® MGLs provide electrochemists with a highly durable electrode backing intended for harsh environments. With comparable property and performance data, MGL products can be used ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG 5U PRO is able to generate 3300 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 5U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 5U PRO ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG PRO is able to generate up to 1500 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HGA ST BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min. The HGA ST BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you