Water Filtration Applications

115 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Water Filtration ×

Industrial and commercial water filtration for effluent water treatment

by Hydro-Gen Engineering Ltd     based in Widnes, UNITED KINGDOM

Through experience we have found that when the correct water filtration system is put into place as an integral part of the effluent water treatment process our customers have been able to experience several benefits:- Enabled water to be re-used in other areas of their operations as part of the effluent treatment process.

Membrane filtration systems for biotechnology and pharmaceutical industry

by GEA Filtration     based in Hudson, WISCONSIN (USA)

GEA Filtration is experienced in processing a wide range of products on a commercial basis and by testing products at the plant site or in our pilot plant testing facility. Definition of the Industrial Biotech and Environmental Biotech Sector. This sector uses living organisms to manufacture a variety of products that result in the reduction of pollution, resource consumption and waste. Typical products include bioethanol, industrial enzymes, biological fuel cells, enzymes for bioremediation, biodegradable plastics and much more.

Industrial Meshes for Polymer Filtration

by GKD - Gebr. Kufferath AG     based in Düren, GERMANY

The filtration of extruded polymers is a separate application area for SolidWEAVE filter media. The particular requirements of the process_ conditions require customized and continuously optimized manufacturing methods and production processes for the wire mesh filters.

Industrail Filtration

by Shanghai Future Filtration Equipment Co., Ltd     based in Shanghai, CHINA

Automotive Paints, Coating, Inks, Dispersions Water and Water Treatment Solvents Lubricants, Metalworking Fluids Parts Cleaning Solutions Pulp and Paper Pharmaceutical Food Processing Chemical Processing Edible Oils Potable Water, Beer, Wine

Industrial Meshes for Distillation

by GKD - Gebr. Kufferath AG     based in Düren, GERMANY

In the demanding applications in distillation technology, i.e. the separation of high-molecular compounds, SolidWEAVE metal meshes are applied in structured mesh packs. Wire mesh packs with GKD filter meshes make delicate separation processes possible with low temperatures and short residence time – keyfactors for distillation process reliability.

Process Belt Meshes for Belt Filter

by GKD - Gebr. Kufferath AG     based in Düren, GERMANY

VACUBELT filter belts for belt filters guarantee continuous filtration with high throughput, low residual moisture and optimal results for the filter effect.

GPR Applications

by Geomorph Instruments     based in Piraeus, GREECE

Our GPR products aid in determining mining safety, establishing bedrock depth, mapping sand and gravel deposits, ascertain rock quality, in addition to mineral exploration. Mining professionals use ground penetrating radar to accurately locate underground structures before drilling, blasting or carrying face operations. Ground penetrating radar is instrumental in helping to identify overhead separations in order to prevent ceiling collapses. In deep mine applications, ground penetrating radar is invaluable for identifying geologic features that may be potential areas for rock bursts, such as fractures, shear zones and faults. GPR is being used as well for mineral exploration in igneous and metamorphic rocks, such as granitic pegmatite, to locate hydrothermal features including cavities and vugs.

Process Belt Meshes for Dewatering / Pressing with Belt Presses

by GKD - Gebr. Kufferath AG     based in Düren, GERMANY

WEAVEinMotion process belts are effective and robust cores for belt presses which are particularly efficiently acting systems for dewatering sludges and fruit mashes. A decrease in transport, disposal and recycling costs is obtained thanks to the reduction in volume achieved.

High performance filtration & separation system for frac fluid

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Proper fluid and proppant placement are critical to a successful propped fracture stimulation treatment. Despite effective placement of the treatment, well performance is often detrimentally affected by incomplete gel breaking and fluid recovery.

High performance separation system for lube oil industry

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been developed to address the inherent deficiencies of the conventional coalescers.

High performance separation system for caustic treating industry

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the hydrocarbon phase.

Environmental technology for droplet seperation industry

by Körting Hannover AG     based in Hannover, GERMANY

As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

Environmental technology for droplet seperation industry

by Körting Hannover AG     based in Hannover, GERMANY

As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

Wastewater Colour Removal

by Arvia Technology     based in Runcorn, UNITED KINGDOM

The presence of colour in water and wastewater, even a small amount, is highly visible and affects the aesthetic value. Colour is often caused by organic matter. Forms of organic content that cause colour pollution include synthetic chemical dyes, algae species and natural dissolved organics such as lignin and tannins.

Dust monitoring and Sand Storm Monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

High performance separation system for ethylene industry

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution steam generator. Fouling reduces plant profitability and on-stream reliability.

Marine And Offshore Emissions Monitoring & Analysis

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Fuels and exhaust gas emissions are subject to international, regional and national controls and Charterers, as well as the public, demand high standards of performance and reliability.

Air control for wastewater treatment aeration

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, large compressors are used to force air through hundreds of air diffusion filters at the bottom of the aeration basins, providing a constant 24/7 supply of oxygen to the micro-organisms in the water.

Membrane filtration systems for food and beverage industry

by GEA Filtration     based in Hudson, WISCONSIN (USA)

The product knowledge we gained by this experience is indicated by the following list of products suitable for processing on a GEA Filtration membrane filtration system. These systems include microfiltration, ultrafiltration, nanofiltration, and reverse osmosis with either spiral-wound, stainless steel, ceramic, tubular, or plate-and-frame configurations.

Need help finding the right suppliers?

Let the XPRTs do the work for you