belt press Equipment available in Bahrain

Available in Bahrain| Near Bahrain
133 Results found

We couldn't find any belt press equipment in Bahrain

Here is a list of results available in Bahrain

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Filtration ×

  • Keyword: belt press ×

  • Available in: Asia & Middle East ×

  • Available in: Bahrain ×

Model CPF - Heavy Duty Belt Press

by ANDRITZ Separation - a division of the Andritz Group     based in Graz, AUSTRIA

The ANDRITZ heavy duty belt press has been used successfully in almost all fields of industrial dewatering for more than three decades. It has been developed continuously for special applications. The ANDRITZ CPF is available in several designs. The number of S-rolls is combined individually with several press nips to solve the most difficult ...

Intereco - Model CAB 1500 - 2000 - Belt Presses

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Robust side frames in high thickness angles and unp shapes. Completely welded and connected between themselves with bolted unp shaped. Completely high thickness hot dip zinc coating. Fasteners in a2 stainless steel. Metal net protections for easy washing of the belt press. Easily removable for maintenance. Protection over gears in aisi 304 s.s. ...

Intereco - Model Edom/L - Belt Presses

by Intereco S.n.c.     based in Candiolo (TO), ITALY

New EDOM/L belt press, with a pre-gravity dewatering zone and a sludge turnover, in sizes from 0.5 m to 1.2 m belts width. This new model is particularly apt for sludges with a low solids content ( below 1.5 % s.s.) And the limited capacities do not justify the use of a gravity filtering table or a dynamic thickeners. Achieved capacity increase ( ...

Intereco - Model Edom 1500 - 2000 - Belt Presses

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Robust side frames in high thickness angles and unp shapes. Completely welded and connected between themselves with bolted unp shaped. Completely high thickness hot dip zinc coating. Fasteners in a2 stainless steel. Metal net protections for easy washing of the belt press. Easily removable for maintenance. Protection over gears in aisi 304 s.s. ...

Intereco - Model Edom Series - Belt Presses

by Intereco S.n.c.     based in Candiolo (TO), ITALY

The open frame, not with standing grate safety guards, makes very simple both cleanings and routine or emergency maintenance. With air compressor ( plus 1.1 kw). Available with extended size for low solid content sludge, self-cleaning washing nozzles with anti-clogging device, totally stainless steel made frame.

PHOENIX - Model MC - Belt Filter Presses

by PHOENIX Process Equipment Co.     based in Louisville, KENTUCKY (USA)

Producing maximum dewatering capacity while using minimum floor space, the PHOENIX Model MC features an innovative, versatile, economical design. Designed primarily for medium capacity biological sludge applications and lighter duty industrial treatment plant effluents.

PHOENIX - Model WX - Belt Filter Press

by PHOENIX Process Equipment Co.     based in Louisville, KENTUCKY (USA)

PHOENIX has expanded its already popular line of Model WX belt filter presses. The MODEL WX is available in several different configurations, each suited to the specific application. Design includes fully welded mainframe, oversized bearings, and unique corrosion protection features. Several different compression zone arrangements are available.

PHOENIX - Model LC - Belt Filter Presses

by PHOENIX Process Equipment Co.     based in Louisville, KENTUCKY (USA)

The Model LC, available with belt widths of 800, or 1200 mm, provides a low cost solution for lower flow applications in the range of 15 to 65 gpm.

Belt Press

by Hangzhou Xingyuan Filter Press Co.,Ltd.     based in Hangzhou, CHINA

Wide range of application, suit for many kinds of sludge. Design of multi-section dehydration with high efficiency and low water content in filtered cake. Adjustable tension of filtering belt, automatic correction of swinging. Automatic rinsing filtering belt for recovering, good rinsing effect and less rinsing water. The adopted filtering belt is ...

OR-TEC x-press - Model 500,1000 &1500 Series - Belt Press System

by OR-TEC, Incorporated     based in Maple Heights, OHIO (USA)

The OR-TEC x-press Belt Press System is the perfect belt press for the small and medium size wastewater treatment plant. It comes in two main configurations, as a double belt press or triple belt press. It is designed to be easy to install, operate and maintain.

Unison - Model 600 PRESS - Filter Belt Presses

by Solids Technology International Ltd     based in Wexford, IRELAND

Belt filter presses are primarily used for sludge dewatering prior to drying or disposal. They are a continuously operating machine which dewater sludge by pressing it between two Porous filter belts.  They are commonly installed in waste water treatment plants, water treatment plants, food and dairy industries, abattoirs and pulp and paper ...

Unison - Model 500 PRESS - Filter Belt Presses

by Solids Technology International Ltd     based in Wexford, IRELAND

Belt filter presses are primarily used for sludge dewatering prior to drying or disposal. They are a continuously operating machine which dewater sludge by pressing it between two porous filter belts.  They are commonly installed in waste water treatment plants, water treatment plants, food and dairy industries, abattoirs and pulp and paper ...

Model SHBP GT Series (Belt Width:1000-3000mm) - Belt Press Filter

by China Weihai Sanjing Environmental Protection Equipment Co., Ltd.     based in Weihai, CHINA

The China SanjingBelt Press Filter is a double belt system ideal for the medium to large size Water and Wastewater Treatment Project. This press combines a gravity drainage zone, a squeezing zone and high pressure shear zone to provide a large dry solids throughput and an excellent final cake. The system can be customized to the clients needs with ...

Model SSBP Series (Belt Width:500-3000mm) - Belt Press Filter

by China Weihai Sanjing Environmental Protection Equipment Co., Ltd.     based in Weihai, CHINA

The China SanjingBelt Press Filter is a double belt system ideal for the medium to large size Water and Wastewater Treatment Project. This press combines two gravity thickener zones, a low pressure zone, a medium pressure zone and a high pressure shear zone to provide a large dry solids throughput and an excellent final cake. The system can be ...

Model SNBP Series (Belt Width:500-3000mm) - Belt Press Filter

by China Weihai Sanjing Environmental Protection Equipment Co., Ltd.     based in Weihai, CHINA

The China SanjingBelt Press Filter is a double belt system ideal for the medium to large size Water and Wastewater Treatment Project. This press combines two gravity thickener zones, a low pressure zone, a medium pressure zone and a high pressure shear zone to provide a large dry solids throughput and an excellent final cake. The system can be ...

Model SNBP GT Series (Belt Width:500-3000mm) - Belt Press Filter

by China Weihai Sanjing Environmental Protection Equipment Co., Ltd.     based in Weihai, CHINA

The China SanjingBelt Press Filter is a triple belt system ideal for the medium to large size Water and Wastewater Treatment Project. This press combines two gravity thickener zones, a low pressure zone, a medium pressure zone and a high pressure shear zone to provide a large dry solids throughput and an excellent final cake. The system can be ...

HydroCal - Stainless Steel Belt Press

by HydroCal Inc.     based in Laguna Hills, CALIFORNIA (USA)

The HydroCal Stainless Steel Belt Presses easily and economically solve the problem of dewatering sludge. Their stainless steel construction guarantees years of reliable service with virtually no maintenance, no painting and no corrosion even in both hostile municipal and industrial environments. Our innovative engineering has made the HydroCal ...

Model SSBP GT Series (Belt Width:500--3000mm) - Belt Press Filter

by China Weihai Sanjing Environmental Protection Equipment Co., Ltd.     based in Weihai, CHINA

The China SanjingBelt Press Filter is a triple belt system ideal for the medium to large size Water and Wastewater Treatment Project. This press combines two gravity thickener zones, a low pressure zone, a medium pressure zone and a high pressure shear zone to provide a large dry solids throughput and an excellent final cake. The system can be ...

Model SHBP Series (Belt Width:1000-3000mm) - Belt Press Filter

by China Weihai Sanjing Environmental Protection Equipment Co., Ltd.     based in Weihai, CHINA

The China SanjingBelt Press Filter is a double belt system ideal for the medium to large size Water and Wastewater Treatment Project. This press combines a gravity drainage zone, a squeezing zone and high pressure shear zone to provide a large dry solids throughput and an excellent final cake. The system can be customized to the clients needs with ...

OR-TEC - Model Gemini Series - Belt Press System

by OR-TEC, Incorporated     based in Maple Heights, OHIO (USA)

The OR-TEC Gemini Series Belt Press is a double belt system ideal for the medium to large size W.W.T.P. This press combines a gravity drainage zone, a squeezing zone and high pressure shear zone to provide a large dry solids throughput and an excellent final cake. The system can be customized to the clients needs with a full range of ancillary ...

Need help finding the right suppliers?

Let the XPRTs do the work for you