Bubble Aerator (Water Filtration) Equipment
-
Manufactured by Planotex GmbHbased in GERMANY
sediment separated from the waste water. The TSF 3 version also has an additional grease trap with floating grease reamer using a fine bubble aeration of the sand trap for the separation and removal of fats and floating ...
-
Manufactured by Waterneer USAbased in USA
The Waterneer BioKube Biological wastewater treatment plant system is a compact biological purification system, consisting of 1 – 3 units, depending on the cleaning requirements. Each unit has one section with submerged aereated filters (coarse bubble aeration), and one section for ...
-
Manufactured by Shivam Water Treaters Pvt. Ltd.based in INDIA
Submerged Aerobic Filter (SAF) incorporates the advantages of Fixed Film Technology combined with Fine bubble Diffused Aeration. SAF is highly suitable for medium and low strength wastewater. Shivam design good quality submerged aerated filter to reduce the amount of BOD and ammoniacal nitrogen in settled sewage and industrial effluents. ...
-
Manufactured by ECOTEC, Ecología Técnica, S.A.based in SPAIN
The BIO-CEL membrane module is a reliable and efficient solution for the future. Its ultrafiltration process guarantees the best parameters in the final permeate, and its laminated configuration minimizes operation costs and maintenance. BIO-CEL combines the benefits of conventional flat membranes and hollow fiber modules without the shortcomings of each of these systems. Due to a membrane ...
-
Manufactured by ABIONIK Group GmbHbased in GERMANY
side. The membrane is welded on rigid frame. The module reduces virus and bacteria by 99.9999 %. Filter plates are continuously aerated through bubble diffusers to keep them clean. The membranes don’t need regular chemical cleaning except one or two maintenance clearings per ...
-
Manufactured by Idro Groupbased in ITALY
The IDROCELL grey-water system can reduce drinking water consumption simply and safely. Drain water from the shower, bathtub and wash basin (grey-water) is returned to a hygienically pure state by passing it through the IDROCELL system. Water treated in this manner can be used again for toilet flushing, irrigation or for cleaning purposes (not for drinking water). The IDROCELL grey-water system ...
-
Manufactured by Water Technology Engineering Ltd. (WTE)based in UNITED KINGDOM
The APEX Biodigester sewage treatment plant superceeds our very successful Falcon Range. Designed for use where the installation of a septic tank is either unacceptable or impractical and a connection to the main sewer impossible. These plants are particularly useful for situations where intermittent flow, very low flow and seasonal fluctuating flow rates cause serious problems for other sewage ...
-
Manufactured by Mooers Products, Inc.based in USA
Centrifugal Blowers play an indispensable role in keeping the United State’s water supply pure. Centrifugal multi-stage blowers are used at municipal and industrial water and wastewater treatment plants. These quiet, high-quality blowers are designed and constructed to withstand continuous duty and to maintain constant pressure with clean, reduced-noise air ...
-
by Trevi nvbased in BELGIUM
Biological wastewater treatment plants exist in several variations. The most important differences are found in the sludge/water separation process. In a continuous activated sludge system the flocks settle in a clarifier. In a sequencing batch reactor (SBR) the aeration and settling processes take place in the same reactor. In a ...
-
by Trevi nvbased in BELGIUM
Biological wastewater treatment plants exist in several variations. The most important differences are found in the sludge/water separation process. In a continuous activated sludge system the flocks settle in a clarifier. In a sequencing batch reactor (SBR) the aeration and settling processes take place in the same reactor. In a ...
-
Manufactured by Wigen Water Technologies - a subsidiary of the METAWATER Groupbased in USA
The unique combination of biological wastewater treatment and membrane filtration makes MBR technology a viable solution for many municipal and industrial applications. Biodegradable pollution is reduced using bacteria and microorganisms. Following biological treatment, the biological sludge is separated from the treated water by a hollow fiber ultrafiltration ...
-
Manufactured by Viltrabased in UNITED KINGDOM
Viltra’s OXCRETE PLUS is a biological sewage treatment plant in multiple concrete structures that uses SAF technology to effectively treat sewage. Designed specifically for larger bespoke applications and tailored to suit your site, it provides a very efficient, reliable and cost-effective solution to sewage/effluent disposal for larger applications within sectors such as commercial and ...
-
Distributed by S.K. Euromarket Ltdbased in CYPRUS
Our membrane bioreactor (MBR) plants are packaged, prefabricated units in mono-block structures that have external dimensions equivalent to ISO containers (same height and width). Our MBR plants are easy to transport, install and relocate. MBR plants are designed only for above ground installation and are suitable capable to serve municipal or ...
-
Manufactured by Water Technology Engineering Ltd. (WTE)based in UNITED KINGDOM
Containerised AG Sewage and Wastewater Treatment Plants - Mobile. Our APEX sewage treatment system can be built inside standard open top shipping containers to allow a completely mobile treatment option This allows the tanks to be shipped easily and once on site they can be installed either below or above ground as the container provides added strength to the system. The plant can be positioned ...
-
Manufactured by Genex Utility Management Pvt. Ltd.based in INDIA
The membrane bioreactor (MBR) process is a modification of the conventional activated sludge process in which the membrane filtration unit, instead of a secondary sedimentation tank, is used to separate the effluent from the activated ...
-
based in CZECH REPUBLIC
The container WTPs are sized along with the jobsheet ATV-A 126 in accordance with ČSN 756402 and ČSN 756401 and with taking into account the directive ATV-H-254 for combined WTP. The outer dimensions of the container WTPs" tank correspond with ISO standard for containers with height of 3,0 m. The tanks of the container WTPs are made of the sheet steel with thickness 5 mm, quality ST ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you