gravity filter Equipment available in Moldova

Available in Moldova| Near Moldova
154 Results found

We couldn't find any gravity filter equipment in Moldova

Here is a list of results available in Moldova

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Water Filtration ×

  • Keyword: gravity filter ×

  • Available in: Europe ×

  • Available in: Moldova ×

Gravity Filters

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Gravity filters are commonly used in applications where liquid-solids separation is required in a variety of different applications for finish water treatment. Gravity filters can incorporate various types of media such as sand, anthracite, greensand and GAC to meet each plant’s water treatment needs. In addition, gravity filters allow for easy ...

CenTROL® - Conventional Gravity Filters in a Cluster Arrangement

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

CenTROL filters may be applied wherever a cost-effective, space-saving conventional gravity filter is desired. The heart of the General Filter CenTROL lies in the prefabricated center column that eliminates onsite assembly of a piping gallery.  CenTROL furnishes its own backwash water supply from in-service cells.  In most cases, backwash supply ...

Intereco - Gravity Disc Filter

by Intereco S.n.c.     based in Candiolo (TO), ITALY

The filter consists of several discs, up to 16 in the larger machines, each made up from sectors which are bolted together to form the disc. Sectors are designed for a high capacity drainage rate. Required floor space taken up by disc filters is minimal and the cost per m2 of filtration area is very low when compared to other filters of similar ...

Model LGF - Gravity Filter

by Filtertech     based in Manlius, NEW YORK (USA)

The Filtertech Model LGF liquid gravity filter provides efficient clarification in a variety of applications. The compact design provides efficient deep pool filtration in restricted locations. The filter is designed for fully- automatic operation through its prewired 110 volt control panel. With minimal installation requirements, the Model LGF ...

Model BT Series - Trough Type - Gravity Filter

by Veeraja Industries     based in Village Shivane, INDIA

Suitable for fine filtration.Filtration capacity : 50 l/min to 300 l/min. Without conveyour. Very Low maintainence. Mounted on rollers. - tank can be cleaned easily.Fits in 150 mm above tank level. Dirty paper wound on seperate mandrel. Totally automatic operation. Common drive for magnetic sepeartor. Very Compact Design. Ideal for indivisual ...

Model MPF - Gravity Filters

by Filtertech     based in Manlius, NEW YORK (USA)

The Filtertech Model MPF Deep Bed Gravity Filter provides an effective means of filtration. A single discharge point allows the solids and media to be collected in a hopper located at the discharge end of the filter. The use of a deep 6″ (153 mm) liquid pool allows a high pressure differential across the media allowing higher filtration ...

Model HGF - Gravity Filter

by Filtertech     based in Manlius, NEW YORK (USA)

The Filtertech Model HGF Deep Bed Gravity Filter provides effective clarification for a variety of applications. This is accomplished by using our patented labyrinth side seal design, which provides an efficient seal along each edge of the filter media. This eliminates the migration of solids around the edge which is a common problem with ...

Model BC Series - Conveyor Type - Gravity Filter

by Veeraja Industries     based in Village Shivane, INDIA

Suitable for fine filtration. Filtration capacity : 50 l/min to 3000 l/min. Totally automatic operation. Ease of maintainence. Ideal for indivisual machines, Can be customised to suit your requirement. Standard sized modules are mentioned in attached PDF catalogue.

Model GSF - Gravity Filter

by Filtertech     based in Manlius, NEW YORK (USA)

The Filtertech model GSF deep bed gravity filter incorporates a very moderate discharge ramp to accommodate numerous applications relative to filter “cake” thickness and type of solids generated. The extended ramp allows for additional drying of the filter “cake” and media prior to discharge. The design of the filter ...

Model DB Series - Compact Band - Gravity Filter

by Veeraja Industries     based in Village Shivane, INDIA

Suitable for fine filtration. Filtration capacity : 50 l/min to 3000 l/min. Used in parrallel for higher flows. Higher fluid column due to drum type design. Totally automatic operation. Ease of maintainence. Ideal for indivisual machines. Can be customised to suit your requirement. Standard sized modules are mentioned in attached PDF catalogue.

Model LF - Gravity Filter

by Filtertech     based in Manlius, NEW YORK (USA)

In a number of filtration applications, floor space is at a premium with very little room for a filter along with the space needed for a clean supply pump and reservoir tank. In addition, many of these applications also require a low invert in to the filter for gravity draining as opposed to installing a transfer sump. To meet these requirements ...

Autowash Gravity Filters

by Swift Tech Engineers (India) Private Limited.     based in Chennai, INDIA

SWIFT TECH Autowash series is made up of fully automated gravity filters with valveless and single valve configuration. These are heavy duty gravity depth filters that combine the advantages of gravity flow, indepth fitlration and automatic operation. Filters can be offered with concrete or mild steel tanks to suit customer convenience.

Duplex Gravity Filter (DGF)

by Smith & Loveless Inc.     based in Lenexa, KANSAS (USA)

The Smith & Loveless Duplex Gravity Filter (DGF) removes suspended solids and particles, improving effluent quality. The standard system is available in sizes to fit any application, providing up to 200 square feet (18.6 square meters) of effective filtration area per unit. Dual media filtration increases filtration depth and limits the head ...

John Deere - Model F9000 - Metal Gravity Filter

by KAR UK     based in Manchester, UNITED KINGDOM

F9000 Metal Gravity Filter is the ideal choice for low energy drip systems. F9000 Gravity Filters are continuous self- cleaning gravity filters and are specifically designed to deal with high load of suspended solids. The filtering method is based on gravity flow through a stainless steel screen. The filter is designed to continuously remove dirt ...

Model Continuous Backwash Type - Gravity Media Filters

by Unidro SpA     based in Milano, ITALY

The Unidro Continuous Sand Filter (ContiSand) is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Incoming water is distributed at the bottom of the filter and flowing upward through the sand reaches the filtered water outlet at the filter top side. Simultaneously with the ...

Model Syphon Selfwash Type - Gravity Media Filters

by Unidro SpA     based in Milano, ITALY

Self-cleaning siphon filters are atmospheric sand filters, often employed as side stream filters in cooling towers circuits. This kind of filter does not require any automatic valve, instrumentation, electrical automation, backwash pumps or other accessories: as a matter of fact, backwash is automatically started on the basis of filter clogging. ...

Model SSC - Self Cleaning Gravity Screen Filters

by Fresno Valves & Castings, Inc.     based in Selma, CALIFORNIA (USA)

The gravity flow design eliminates the need to pump water into the filter, saving energy and reducing operating costs. Flow Rates from 350 to 2000 GPM. Eliminates backflushing. Simple, trouble-free design. Stainless Steel construction is durable and lightweight.

Gravity Media Filters

by Wigen Water Technologies     based in Chaska, MINNESOTA (USA)

Wigen designs and builds custom gravity media filters for a wide variety of industrial and municipal applications. As the name implies, gravity is used as the motive for a fluid stream to pass through a bed of granular media through which physical and/or chemical removal of impurities is achieved. Gravity filters are ideal for treating larger ...

Model C-Filt - Continuously Backwashed Gravity Sand Filter

by SFC Schueffl & Forsthuber Consulting / SFC Umwelttechnik GmbH     based in Salzburg, AUSTRIA

C-Filt is a continuously backwashed gravity sand filter, which saves space and operation cost.The sand filter is based on the counterflow principle. As a result, the bed is in slow, constant downward motion throuhg the unit. Compressed air for th esand pump is provided via air compressor.Thus water purification and sand washing both take place ...

Deep Bed Filters

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

A Deep Bed filter may be defined as a granular filter for removal of TSS from secondary treatment effluent using a media depth of at least four feet at a filtration rate of more than 2 gpm/ft2. Coarse media is normally used to encourage deep penetration of solids into the media bed. This allows for longer filtration runtimes. Simultaneous air and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you