Sand Separation (Water Filtration) Equipment Available In St. Helena
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Trommel screen is designed to effectively separate MSW, organic waste, recyclable waste, stale waste and kitchen waste by different drum screen sizes to optimize the material for the subsequent processing. JONO trommel screen can clean itself while working as it rotates,which maximize the separating efficiency and lessen the maintenance ...
-
Manufactured by Purestream, Inc. and Purestream ES , LLCbased in USA
The In-Eko Sand Separator is a piece of headworks equipment used to remove sand, glass, small rocks, egg shells, etc. that would normally enter the system. The problem with these items entering the system is that they can possibly damage pumps and other submerged equipment as well as having no organic value. ...
-
Manufactured by Colubris Cleantechbased in NETHERLANDS
We have developed a range of efficient separators to remove fast settling materials, like sand, from water. Based on the difference in specific gravity between the water and the settling materials, predictable and maximum separation efficiencies are achieved. A shaftless conveyor, installed at an ideal angle, transports the ...
-
Manufactured by Rivulis Irrigation, Ltdbased in ISRAEL
The F1000 Hydrocyclone Sand Separator creates a centrifugal action that moves the water around the edge of the body, throwing the sand and heavy materials to the outside of the cyclone. The heavy materials then fall into the underflow chamber to be collected. Rivulis provides the proper sized underflow chamber to match the performance of each ...
-
Manufactured by Power Plastics s.r.o.based in CZECH REPUBLIC
Sand separators series F-700, are designed for use as head filters in agricultural and industrial settings. The hydro-cyclone filters has been designed and built on the principle of free flow, where water flows freely on a spiral path along the length of the filter's cylinder. As the result of the centrifugal force, waste becomes separated ...
-
Manufactured by Vodatech, s.r.o.based in CZECH REPUBLIC
Sediment from a sand trap, which typically contains a mixture of inorganic substances, organic substances and sand, is pumped into a sand separator and there occurs a separation of the coarser sand. The sand separator precedes the sand washing ...
-
Manufactured by Everfilt® Water Filtration Systemsbased in USA
The Everfilt® S1-Series line of vertical centrifugal sand separators are constructed from carbon steel and finished in a UV resistant, two-part epoxy paint. Most commonly used when removing suspended solids or inorganic materials down to 80 microns and rated up-to 150 PSI. Our agricultural centrifugal sand separators are also ...
-
Manufactured by GAH Global Ltd.based in CYPRUS
How it works: The mixture of water/sand come to the upper part of the container. The floating particles are separated at the surface by a submerge plate, these are carried with the mean of a snail mechanism and are dismissed together with the carped solids and the sand almost dry to the disposal container. The clean water by overflow come out ...
-
Manufactured by ODIS Ltd.based in ISRAEL
Application Sand Separation. Inlet Outlet Diameter 20 mm / 3/4″. Recommended Flow Rate 2 to 3.5 m³/h / 8.8 to 15 gpm. Max Working Pressure 10 bar (150 psi). End Connection Type Flange. Operation Automatic. Control ...
-
Manufactured by Envotech Ltd.based in BULGARIA
Grease and sand separation. Beside full plant planning and construction, we sell degrease units for treatment of wastewater, in particular for the separation of grease and inert substances, manufactured completely in linear rotomoulded polyethylene, made up of collection chamber, primary decantation chamber, with horizontally ribbed ...
-
Manufactured by Plastica Alfa S.p.A.based in ITALY
Threads complying with standard. Among the most innovative products, the Alfaturbo hydro cyclone, sand separator, in polyamide glass-reinforced, using the centrifugal force resulting from the geometry of the body, allows the separation of heavy particles with a density greater than the liquid to be filtered, making them settle into the ...
-
Manufactured by R.E.M. srlbased in ITALY
Grit and sand separation and conditioning systems.Systems for grit washing and conditioning. Grit classifiers and separators allow to reach a high standard in sand and grit separation from the effluent achieving 90% of the grit having particle size above 200 microns.Some systems and configurations allow to reach ...
-
Manufactured by Yardney Water Filtration Systems, Inc.based in USA
Yardney Centrifugal Sand Separators are ideal for removal of suspended solids and inorganic materials with a specific gravity of 2 or greater. This highly effective system will provide consistent, simple removal of inorganic material down to 75 microns. Easily installed, these carbon steel units are rated to 150 psi with threaded or flanged ...
-
Manufactured by Luoyang Longzhong Heavy Machinery Co., Ltd.based in CHINA
, starch, salt industry, tea, etc.), metallurgy, metals, magnetic materials, activated carbon, quartz sand, and other ...
-
Manufactured by IN-EKO Team s.r.obased in CZECH REPUBLIC
Separation of sand and other heavy particles from water mixture and undissolved matter contained in that water. Washing of the separated material using clean ...
-
Manufactured by IN-EKO Team s.r.obased in CZECH REPUBLIC
Function: sand separator is intended for separation of sand and heavy solids from waste water. Suitable for municipal waste water treatment plants, in paper mills and other industrial ...
-
Manufactured by Finnchain Oybased in FINLAND
Finn chain’s grit collector removes the sand from the bottom of the tank to a removal channel. In the grit collector system, special solutions have been developed for the scraper flights and rails for them to endure the abrasion of sand. Grit collectors are customised according to the client’s tanks and process ...
-
Manufactured by Yangzhou Maoyuan Environmental Protection Technology Co., Ltdbased in CHINA
WSF type belongs to the light sand water separation equipment, which is mainly used for the further separation of sand water mixture discharged from the equipment such as cyclone sand settler. It is suitable for domestic sewage treatment engineering. Generally, non-axial structure is adopted. LSF type belongs to ...
-
Manufactured by Sereco S.r.l.based in ITALY
The rotating blade sand remover is installed on small and medium treatment plants to comply with the sand removal requirements. It consists of an oil-bath gear motor to drive a rotating unit, which, in its turn, comprises a fifth wheel, a hollow shaft with a couple of blades and a piping system for air supply and sand ...
-
Manufactured by Sereco S.r.l.based in ITALY
The rotating blade sand remover with oil and grease separator is installed on small and medium treatment plants to comply with the sand collection and oil and grease separation requirements. It consists of an oil-bath gear motor to drive a rotating unit, which, in its turn, comprises a fifth wheel, a hollow shaft with a couple of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you