screen press Equipment

107 Results found
Only show results in Virginia?
  • Category: Water & Wastewater ×

  • Subcategory: Water Filtration ×

  • Keyword: screen press ×

ASTIM - Screenings Press

by ASTIM A.S.     based in Gebze - Kocaeli, TURKEY

The screenings to be treated are discharged directly from a screen or conveyor into the feed trough of the Screenings Press “ASP”. A robust conveying and compacting screw transports the screenings into the wash zone where they are exposed to powerful wash water. The washing achieves perfect separation of organic particles and thus ...

Screening Presses


They are used for compressing and dewatering the collected screenings, thus allowing easy and economical waste transportation. They require very little maintenance due to their simple design, sturdy casing, wear resistant press screw, bedding system and reducer withstanding all loads.

Screening Press

by Arges Treatment Machinery Company     based in IVOGSAN, TURKEY

Reduce the volume of discharge 40%. Press, dewatering and transport is done by one mechanical equipment.  Easy to install for all types of screen.  Overload protection is maintained via mechanical tork limiter. Discharge can be transferred by a conveyor or dumpster.

Model ConDrain - Screening Press

by Conpura AB     based in Ålem, SWEDEN

In the segment for handling the screening, sand and sludge, Conpura also provides equipment for dewatering.

CleanWash™ - Screw Wash Press and Counter Pressure Screw (SWP/CPS)

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Unlike other screw wash presses in which the design of the discharge pipe creates the back pressure necessary to dewater screenings, WesTech's CleanWash™ Screw Wash Press and Counter Pressure Screw regulates exactly the right amount of back pressure to meet the highly variable influent. The positive conveyance of the screenings after each washing ...

Model KD 09 - Screening Hydraulic Press

by Danish Wastewater Equipment A/S     based in Vejle, DENMARK

The Screening Press Hydraulic KD 09 is used for dewatering, compaction and transport of screenings and other material that can be dewatered. Screening could be feeded to screen solids press KD by a shaft less conveyor type KD02 or by pipe. The machine is reliable in service, easy to operate and only requires limited maintenance.


by Waste Tech inc     based in Libertyville, ILLINOIS (USA)

The FSM Screenings Washer Press is manufactured in three standard sizes with shaft diameters of 200 mm, 300 mm and 350 mm ( 8, 12 and 14 inches respectively ). It is used to compact and transport sewage screenings and other wet waste solids generated by screening. The screenings are discharged directly from the FSM filterscreen or via a conveyor ...

Screenings Dewatering Press

by Atara Equipment Ltd     based in Laval, QUEBEC (CANADA)

Designed for conveying and dewatering in one compact unit.

Flexoplan - Meshes Caul Screens and Press Screens

by GKD-USA, Inc.     based in Cambridge, MARYLAND (USA)

Flexoplan Caul Screens and press screens – The premier name in press screens for the engineered wood and building products industry. For decades, GKD has been the leader in quality standards for technical meshes made either of metal or synthetics for wood manufacturing industries worldwide.

Screw Conveyor

by FRIULANA COSTRUZIONI s.r.l.     based in Vigonovo Di Fontanafredda, ITALY

The screw conveyor is fitted with a spiral actuated by a motor reduction unit. The spiral is secured to the opposed end by a central hub and is fitted with adjustable supports with threaded bars. An inlet hopper and an outlet hopper ensure proper flow of the material. The screw is designed to collect the material discharged by a screen or a belt ...

Helical Type Canal Screens

by ENTA Treatment Systems Engineering Contracting LTD     based in Istanbul, TURKEY

Helical screen is a kind of fine screen which is used especially in the open canals with less width. Those are used in domestic and industrial wastewater treatment plants and also can be used in process water preparation plants of many industries. Helical canal screen consists of a cylindrical screen wire and a spiral that cleans the screen. Those ...

Screw Grit Classifier

by ENTA Treatment Systems Engineering Contracting LTD     based in Istanbul, TURKEY

Grit classifiers are used for pressing, dewatering and decreasing the volume of the wastes which are collected by the screens. Thus, this make easy the transportation of the wastes and gains savings. This needs less maintenance by its simple design, strong body structure, pressing screw durable to detrition, bearing system that meets all loads and ...

Internal Flow Screen-2

by ENTA Treatment Systems Engineering Contracting LTD     based in Istanbul, TURKEY

MATERIAL Body : AISI 304 , st-37 + Epoxy Drums : AISI 304 SS304, Chassis can be produced as St37 or SS304 or from any other material as appropriate to the project. Impellent group : Motor + reducer , if required, variator or frequency converter can be added. (Optional) Scraper Knife : The part of the AISI 304 stainless steel scraper arm which ...

Mellegard & Naij - Model SP - Screw Press

by Hydria Water AB     based in Borås, SWEDEN

Simple single tube trough construction. Robust wear steel lined screw and thick wear bars. Compact design with selectable drive unit gives flexibility. Enclosed, safe & hygienic. Screw Press SP is used for compaction och conveying of screenings and wet waste.

Mellegard & Naij - Model RS - Drum Screen

by Hydria Water AB     based in Borås, SWEDEN

Simple robust quality machine for pumped flows. Separated dirty/clean side eliminates ”carry over”. Can be used as one stage pre treatment before membrane filtration. Easy changeable & alternative filter/screen/slot panels. Integrated screenings conveyor, wash press & shredder. Alternative solutions for drum cleaning reduces ...

Claro - Model X-Screen - Fine Step

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro is pleased to offer the X-Screen, a high quality fine screen that delivers exceptional screening capabilities, long-term reliability, and an ultra-hygienic and odor-free working environment. Removes hair and fine grit to protect downstream equipment and processes, without the possibility of screenings carry-over downstream.

Model SLB 636 - Screening Compactor

by JWC Environmental     based in Santa Ana, CALIFORNIA (USA)

IPEC's SLB series sewage screen meets the needs of small WWTP systems in treatment of domestic wastewater. The compact unit removes trash solids down to 500 micron from primary effluent ahead of biological process cells.

Model ESP - Screw Press

by Vulcan Industries     based in Missouri Valey, IOWA (USA)

The Model ESP Screw Press consists of an axial thrust bearing with a stainless steel body; inlet hopper; wedge-wire drain; substantial, precision machined shafted spiral; press housing with compression zone; flushing nozzle; press water drain pan and drive assembly.

Model EWP - Washing Press

by Vulcan Industries     based in Missouri Valey, IOWA (USA)

The Model EWP Washing Press is a spiral press used to wash organic matter out of screenings material. The Washing Press washes, dewaters, compacts and transports screenings to a conveyor, container or other suitable receiving device.

HydroCal - Static Screen

by HydroCal Inc.     based in Laguna Hills, CALIFORNIA (USA)

HydroCal's Static Screen provides efficient screening of a wide variety of wastewater products through continuous screening. HydroCal's Static Screen is available in a range of sizes to process different flow rates and materials in order to satisfy each customer's processing requirements.

Need help finding the right suppliers?

Let the XPRTs do the work for you