process water industry Articles
-
Oxygen Generation for the Ozonation of Process and Drinking Water
Purity is in the Air Ozonation can help remove chemical elements such as iron or manganese as well as organic substances and bacteria from the untreated water. The oxygen needed for this is produced using special oxygen generators. Water is possibly the most important asset there is. However, untreated water is usually contaminated with various substances and has to be treated before it can be ...
-
Practical techniques and methods to develop an efficient water management strategy
Over the last two decades, attitudes to the environment have changed. We no longer accept that pollution is inevitable. Instead, the public is aware that improvements are possible and believes that the expense should be met. The response of governments has been to introduce new legislation and to establish regulatory authorities with increased powers to enforce compliance. Today, reducing waste ...
-
Water Treatment
Water treatment describes those processes used to make water more acceptable for a desired end-use. These can include use as drinking water, industrial processes, medical and many other uses. The goal of all water treatment process is to remove existing contaminants in the water, or reduce the concentration of such contaminants so the water becomes fit for its desired end-use. ...
-
Evaluation of ultrasound technology for the disinfection of process water and the prevention of biofilm formation in a pilot plant
In this study, we investigated the use of ultrasound for the disinfection of process water as an alternative for more traditional techniques, like chlorination and UV-irradiation. A pilot plant was constructed to mimic circulating process water in industrial environments. The disinfection efficiency of ultrasound was assessed and compared to UV-treatment and chlorination. In addition, the ...
-
Ground Zero for Industrial Parts Cleaning Discharge - Case Study
PROCECO helps the R.H. Sheppard Co. attain zero waste after parts cleaning. RH Sheppard purchased a PROCECO Eco-Smart MVR (Mechanical Vapor Recompression) evaporator with a goal of doubling their wastewater processing capabilities. Their new system replaces an obsolete and energy-consuming evaporator. The PROCECO Eco-Smart uses a low-energy distillation method that generates a high-quality ...
By PROCECO Ltd.
-
Process Water Reuse – Oil/Gas Industry - Case Study
Challenge An large oil processing company wanted to reuse their process water. The water contained hydrocarbons, sulfate, TSS, BOD/COD, dissolved salts and high levels of iron. Solution Genesis Water Technologies provided consulting and engineering design as well as providing the specified system solution. The system solution included advanced oxidation, specialized backwash filtration system ...
-
The ecological impact of membrane-based extraction of phenolic compounds – a life cycle assessment study
Many phenolic compounds show high boiling points, low molecular weights, moderate polarities or high toxicities. Therefore, conventional wastewater treatment is limited or expensive. Recycling of the separated compounds is often not possible. But, if liquid-liquid reactive extraction is linked to a non-porous membrane, some or all of the above mentioned limitations may be overcome. The key ...
-
100+ Pulsar ultrasonic units helping to Mitigate Malaysia`s floods case study
Pulsar Measurement's non-contacting ultrasonic level measurement instruments have been selected as part of the Muda River Flood Mitigation Project. More than 100 Pulsar Blackbox units are to be supplied through HSA Asia, Malaysia, along with Pulsar dB10 transducers. The project provides vital real-time tracking of river level, warning of potential flooding risks in the Kedah and Pulau Pinang ...
-
The Effects of Furnace Configuration Using The Torch High Temperature Combustion Analyzer
Abstract In the evaluation of industrial process waters and wastewaters, of particular interest is organic carbon contamination from either microbial or synthetic derivatives, due to their possible environmental impact. High temperature combustion total organic carbon analyzers provide the most efficient way to measure organic carbon in these waters. The furnace parameters for high temperature ...
-
Advanced engineering for ATEX solutions
The process of disinfecting water with UV light is a proven technology for drinking and process water in many industries, however the high standards required by the offshore industry command these systems to be engineered way beyond the normal specification of many manufacturers. When a leading offshore contractor based in Malaysia required two high specification ATEX systems for operation in ...
-
2012 Economy and the Water Industry
2012 Economy and the Water Industry Our economic future is a topic that is on everyone's minds especially as we enter into 2012. Will our economic future improve? Will we get our funding? What are others doing to prepare? A recent internet search produced interesting results on the topic. Here are some of the results: Dealing with Economic Pressures in the Water Industry Black ...
-
Water Treatment Process
The water treatment process can shift slightly in various fields, depending on the innovation of the installation and which needs to be processed, but the basic standards are largely equivalent. This area describes the standard water treatment process. Water treatment processes for industrial that a extensive, and data on a portion of the more regularly utilized process are on our water ...
-
Overcoming the Global Water Crisis: A Focus on Wastewater Recycling & Reuse
While it is true that more than half of our planet’s surface is covered in water, a vast majority of it is saline. Fresh water, the water we use in hundreds of ways every day, constitutes only 2.5 % of all the water on the Earth. Today, the world faces what is known as the water crisis. Parts of the world do not have access to this most vital resource on the planet. Therefore, a focus on ...
-
Next generation of UV systems to showcased at WEFTEC 2010
With atg UV Technology systems treating in excess of 5,000 m3/hr daily, Ultraviolet disinfection is no longer an ‘emerging' technology. atg UV Technology will be attending WEFTEC 2010, (Booth 1438) and in addition to exhibiting their wide selection of conventional UV disinfection systems and services, technical experts will be on hand to discuss their soon to be released new range of UVLX ...
-
Surface Water Treatment Industry - Case Study
“The surface treatment industry itself exists to produce durable products and to spare the environment.“ K. Hartwall Ltd. is an enterprise in the metal industry with net sales of approximately 20 million euro. The company is well known for its innovative carriage products used in the transport and storage of goods, especially foodstuffs. The primary material in carriages is steel, ...
-
Innovative Water Solutions for the Food/Beverage Processing Industry
With the growing international and local pressure, the Food and Beverage industry has to find new ways in its product development as well as minimizing costs and health risks. Sustainability has become an important issue in the evolving Food and Beverage industry. Companies are being required by industries and government agencies to better utilize their water consumption to minimize their ...
-
Mechanical vapour compression desalination plant at Trombay
Desalination plants based on Mechanical Vapour Compression (MVC) technology are inherently the most thermodynamically efficient. The thermodynamic efficiency of the MVC process is derived from the application of the heat pump principle. A single unit of a two-effect MVC desalination pilot plant of 50 m?/day capacity has recently been commissioned at Trombay, Mumbai. The desalination unit is very ...
-
All about ultrafiltration system, its mechanism, process, and application
An ultrafiltration system is based on numerous membrane filtrations, where pressure causes screening through a semipermeable membrane. In this method, the submerged solid particles and the solutes of greater mass are reserved within, and particles of low mass escape through membrane within the filtrate. Ultrafiltration system is widely used in various industries for water purification. These are ...
-
Case study: Printed Circuit Board Manufacturing
Aspocomp Ltd. is a Finnish leader in the manufacture of printed circuit boards (PCB), thick film hybrid circuits and mechanical assemblies for the electronics industry. Its main customers are European manufacturers of electronics equipment. Rather than producing and marketing its own products, Aspocomp relies on its customers who design the product and provide the specifications and drawings, ...
-
A molecular imprinted polymer based sensor for measuring phosphate in wastewater samples
Phosphate detection in water samples is still completed using colorimetric standard methods, which have a number of disadvantages, to such as being time consuming, requiring filtration, a number of different reagents, frequent calibration and proper disposal of waste chemicals generated. Hence, a simple cost effective analytical method and instrumentation is highly desirable to aid the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you