Water Flow Monitoring Software in Europe

  • Version SKED - Rating Curves Editor Software

    KISTERS’ rating curve editor (SKED) combines the experience of rating curve experts from around the world. SKED generates solutions and workflows for natural flow cross sections (e.g. in compliance with the “Pegelvorschrift” (the German Manual for Water Level Gauging and Discharge Measurements) and standard cross sections (e.g. ...

    By KISTERS AG based in Aachen, GERMANY. from Water Software line

  • Groundwater Flow : FLAIRS and MODFLOW

    Based on the same initial data, the FLAIRS module can be used to calculate groundwater flow using the finite element method while MODFLOW can be used when the finite difference method is prefered. Both FLAIRS en MODFLOW calculate steady state and transient groundwater flow for multi-layered systems. They also allow anisotropy to be accounted for ...

    By Triwaco based in Maastricht, NETHERLANDS. from + Simulation Software line

  • GGU-SS-Flow3d

    Capabilities: Powerful grid generator with grid refinement and optimisation, Read ASCII data, Consideration of phreatic lines and unsaturated zones, Allocation of layer boundaries via fixed values or interpolation grid (import of ASCII data from the GGU GEO-GRAPH program) , Graphics controlled input and editing of boundary conditions, e.g. ...

    By Civilserve GmbH - DP for Civil Engineering based in Braunschweig, GERMANY. from FEM Groundwater Flow Modelling Software line

  • GGU-SS-Flow2d

    Capabilities: Powerful mesh generator with mesh condenser and optimizer import of ASCII-Data. Consideration of seepage lines and the unsaturated zone,Definition of layer boundaries using fixed values or an interpolation mesh (data import of ASCII-Data of GGU-GEO GRAPH), Graphically oriented data input and editor for fixed boundary conditions such ...

    By Civilserve GmbH - DP for Civil Engineering based in Braunschweig, GERMANY. from FEM Groundwater Flow Modelling Software line

  • GGU-Transient

    Program Capabilities: Consideration of seepage lines and the unsaturated zone, Graphically oriented data input and change of time-dependent boundary conditions using polygons for potentials and flux, Graphically oriented data input and change fixed boundary conditions using polygons for potentials and flux (single, line and area flux), Color ...

    By Civilserve GmbH - DP for Civil Engineering based in Braunschweig, GERMANY. from FEM Groundwater Flow Modelling Software line

  • Groundwater Vistas - Graphical User Interface for Groundwater Flow & Contaminant Transport Modeling

    Graphical User Interface for Groundwater Flow & Contaminant Transport Modeling. Groundwater Vistas is a state of the art software package for 3D groundwater flow and contaminant transport modeling, calibration and optimization using the MODFLOW suite of codes. The advanced version of Groundwater Vistas provides the ideal groundwater risk ...

    By RockWare, Inc. Office in Cureglia, SWITZERLAND.

  • Version BIBER - Flow Measurement Software

    BIBER is a discharge measurement application you can useboth in the field and in the office. BIBER provides all necessary functions for direct collection of discharge measurement data through a field computer and for manual collection and evaluation of the flow measurement data in the office. In the field, BIBER works with all common measuring ...

    By KISTERS AG based in Aachen, GERMANY. from Water Software line

  • Canarina DESCAR · outfall modeling · buoyant jet model

    DESCAR is a software for wastewater dispersion analysis. Outfall modeling. This module is for the buoyant jet model. The necessary data in the Buoyant jet model is:Effluent velocity ua (m/s): The average velocity of the pollutant effluent. It can be around 1 m/s.Pollutant concentration (g/m3): The discharge concentration of the material of ...

    By Canarina Environmental Software based in Canary Islands, SPAIN. from Canarina DESCAR · water pollution Software line

  • Canarina DESCAR · wastewater effluent modeling · modifying data

    DESCAR is a software for wastewater dispersion analysis. Wastewater effluent modeling and agricultural effluent. This module is for modifying data. Some discharge data can vary with time (velocity of the current, pollutant concentration,...). Taking this into account, the program can do temporal averages in the calculation. In the DESCAR software, ...

    By Canarina Environmental Software based in Canary Islands, SPAIN. from Canarina DESCAR · water pollution Software line

  • FlowSource - Groundwater Software

    FlowSource provides a greater understanding of the where, when and how of groundwater flow. FlowSource was released for purchase in 2013 and is an easy to apply groundwater software program that graphically delineates where and how wells and/or rivers obtain their water in groundwater simulations. With this information the full story of where, ...

    By ESI Ltd - Environment Specialists based in Shrewsbury, UNITED KINGDOM. from Environmental Software Software line

  • Aqua3D - Surface Water Modeling

    Are you tired of making compromises with your model conceptualisation and having to dumb down your data because your modelling software is inadequate to the task? Are you looking for a mathematically stable, truly time varying flow and contaminant transport modelling tool which will give you the freedom to model as you want and as the real world ...

    By Vatnaskil Consulting Engineers based in 108 Reykjavik, ICELAND.

  • AquaSea - Surface Water and Contaminant Transport Modeling Software

    Are you looking for a mathematically stable, truly time varying flow and contaminant transport modeling tool which will give you the freedom to model as you want and as the real world demands? If you are then the solution is available now with AQUASEA. AQUASEA for Windows software is a powerful and easy to use finite element program to solve flow ...

    By Vatnaskil Consulting Engineers based in 108 Reykjavik, ICELAND.

  • VINMOD MW - Groundwater Software

    A Windows based tool used to evaluate the state groundwater quality through mathematical inversion of the concentration-time series data that can be recorded during any pumping test operations.

    By Hydroxpert Technology based in Meylan, FRANCE.

  • Surface water option: Overland flow and surface water flow

    Watercourses may be defined by line-elements in multiple layers. In combination with the TOPSYSTEM triwaco can simulate virtually any water system. On a regional scale from a delta to karstic terrain and on a local scale from complex drainage systems to entire artificial recharge & recovery schemes. As part of this it is sometimes useful or ...

    By Triwaco based in Maastricht, NETHERLANDS. from + Simulation Software line

  • PC Progress - Version Hydrus-1D - Windows-based Modeling Environment Software for Analysis

    The program numerically solves the Richards' equation for saturated-unsaturated water flow and Fickian-based advection dispersion equations for heat and solute transport. The Flow equation incorporates a sink term to account for water uptake by plant roots. The Heat transport equation considers conduction as well as convection with flowing water. ...

    By PC-Progress s.r.o. based in Prague,, CZECH REPUBLIC.

  • Version TRACE - Pathlines And Velocity Fields

    The module TRACE calculates the path a particle takes in a steady-state or transient flow field over a given period of time based upon the groundwater flow calculated with TRIWACO-FLAIRS or MODFLOW. The calculation length of the pathlines (in days) can be defined by the user. For a transient groundwater model a velocity field is calculated for ...

    By Triwaco based in Maastricht, NETHERLANDS.

  • iMOD - Software

    iMOD stands for Interactive MODeling and is an user-friendly interface (iMOD and iMODFLOW) to support the use of (large-scale) groundwater flow models, based upon the concept of MODFLOW 1. Specially designed such that is can handle large models that can not be supported by commercial GUIs, such as GMS, Visual Modflow.

    By Deltares based in Delft, NETHERLANDS.

  • 2D PlaxFlow Module

    Plax Flow is an add on module to the PLAXIS 2D program. Geotechnical applications require advanced numerical tools and constitutive models for the simulation of the non-linear, time dependent and anisotropic behaviour of soils and/or rock in saturated and partially saturated situations. For many practical applications it is necessary to take into ...

    By Plaxis B.V. based in Delft, NETHERLANDS. from PLAXIS 2D Software line

  • GeoHECRAS - HEC-RAS Modeling and 3D Visualization Software

    GeoHECRAS significantly speeds up HEC-RAS model creation and review, producing better and more accurate results. Rapidly construct HEC‑RAS models from a variety of data sources. Accelerate engineering workflow and streamline analysis review. Compute water surface profiles for steady and unsteady flow models, bridge and culvert roadway ...

    By CivilGEO, Inc. Office in FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you