Water Gates Equipment For Water And Wastewater Available In Australia
-
ShowcaseManufactured by Finn Corporationbased in USA
Designed with time-tested features, the T330 HydroSeeder offers value, reliability and productivity to meet the needs of large-scale applications. The T330 features the highly efficient FINN proprietary centrifugal slurry pump with a 134hp John Deere diesel engine and an independently controlled pump ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex 720 in-line flanged rubber duckbill check valve is designed to fit directly inside of an existing pipe. This particular valve is supplied with a flat face rubber flange, which allows installation between existing pipe flanges, and eliminates the need for a valve body. Various drilling standards are available upon ...
-
PremiumManufactured by Proco Products, Inc.based in USA
TheProco ProFlex Style 710 flanged duckbill check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
-
PremiumManufactured by AMS, Inc.based in USA
2" X 12" Multi-Stage Soil Core Sampler Complete, Hex Quick Pin. The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000W model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the flow. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates a true average flow reading. The OFS 2000-W model is equipped with Automatic Gain Control (AGC) to ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 770 and 780 wafer style rubber check valves feature many design benefits, including: All-rubber construction to resist abrasive slurries. NSF 61 standard construction. Ultra-quiet operation, with no water hammer. Unique design to prevent backflow. Negligible maintenance and energy costs. Will not warm or freeze. Quick interchange with any flap type check valve. Available ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000 has a range of 0-40m/sec and is the only flow sensor that gives a true non-contracting cross-stack flow measurement of the process. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex™ Style 730 rubber duckbill check valves are designed to easily slip over an existing pipe and be attached with heavy-duty stainless steel clamps. It can be installed in both vertical and horizontal ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-GATE Flushing Gate System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, as well as sewer inverts, using a single flush. It has been used in CSO, SSO applications and can be used in agricultural and industrial applications ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 740 slip-on in-line rubber duckbill check valves are designed to slip directly into an existing pipe, and are supplied with an expandable clamp to secure it in ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco ProFlex Style 750 jacketed flanged rubber check valves are designed with a full metal enclosure, for easy installation within existing piping ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2" X 12" Multi-Stage Soil Core Sampler Complete collects an approximate 2" diameter undisturbed core sample down to 48" deep when optional extension sections are attached. This sampler has an outside diameter of 2-3/8" and accepts a 2" liner. The cap, sampler base, extension section, and auger tip are constructed of 300 series stainless steel (SST). The core tip is constructed of 400 series ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000P Particulate and Flow sensors report Air Flow and a general Particulate loading and percent opacity in virtually any operating condition. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ProSens was specially developed to carry out reliable dust measurement on clean sides after ...
-
Manufactured by Bike Dock Solutions - UK Aggregates Ltdbased in UNITED KINGDOM
Our best selling style of cycle shelter, comes with all-round features to suit any environment and is also used and approved by Transport for London. Mild steel cycle shelter with bolt down fixing or underground fixing available. The Bike Shelter is available in a galvanised, polyester powder coated RAL code colour finish or hot dipped galvanised and polyester powder coated RAL code colour ...
-
Manufactured by elomat GmbHbased in GERMANY
Slide Gate Valve Devices for buried slide valves an above floor hydrants. Voltage: Accu 20 V ...
-
Manufactured by Saikrupa Industriesbased in INDIA
Saikrupa's dense phase system is based on a unique design that offers true dense phase conveying with low conveying velocities and high material to air ratio. It incorporates an indigenously designed material inlet valve that can take high head load and seals perfectly. This inlet valve does not require frequent seal replacement as in slide gate valves, still used by many other manufacturers. The ...
-
Manufactured by Evenproducts Limitedbased in UNITED KINGDOM
The heavy-duty reinforced PVC material prevents Algae growth and wind-borne debris or rain water entering the water. The ball valve flap allows access for the supply as well as access for sampling the water. The cover is a heavy duty tailored PVC material which is draped over a centre support structure. This is held in position and tensioned throughout, using adjustable polypropylene guy ropes ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you