Only show results available in Virginia? Ok

flap gate (Water Gates) equipment

  • Model 450 - Flap Gate

    Series 450 Flap Gates are used for backflow prevention in gravity flow; pump discharge and tidal applications. Fabricated Flap Gates offer high performance and long life in designs that accommodate a wide range of mounting arrangements and flow conditions. Rugged, reinforced construction is combined with a resilient seal to provide a heavy-duty, ...

    By Whipps, Inc. based in Athol, MASSACHUSETTS (USA). from Flap Gate Product line

  • Flap Gates

    Rodney Hunt and Fontaine Flap Gates are designed to prevent the reverse flow of water through an opening. They feature adjustable hinges, which control the force needed to move the flap. Several different models are available for specific applications.

    By FONTAINE-AQUANOX based in Sherbrooke, QUEBEC (CANADA). from Flap Gates Product line

  • Rodney Hunt - Flap Gate

    Rodney Hunt Circular and Rectangular Flap Gates are designed to withstand the stresses resulting from high seating heads, and to maintain maximum sensitivity to unseating heads. Backflow prevention in free discharge. Cast or fabricated, rigid or flexible designs. Circular or rectangular openings to 96’ for gravity flow.

    By Rodney Hunt Company - VAG Valve and Gate Group based in Orange, MASSACHUSETTS (USA).

  • Coldwell-Wilcox - Flap Gates

    Flap gates are the simplest way to prevent water from returning back into pipes and openings. The gate is designed so that whatever the size, a small flow will open the gate with unseating pressure and will remain watertight with seating pressure. Also known as tide gates and floodgates because of their ability to prevent back flow into a ...

    By Coldwell-Wilcox Technologies, LLC based in Cincinnati, OHIO (USA). from Flap Gates Product line

  • Flap Gates

    Waterman Flap gates are installed at the end of pipe lines to allow free outflow and prevent backflow. Waterman Flap Gates can be made of either Stainless steel (304L or 316L) or Aluminum to provide a corrosion-resistant rust-proof automatic drainage and backflow prevention system. With J-bulb neoprene adjustable seats, they assure excellent ...

    By Waterman Industries of Egypt based in Cairo, EGYPT.

  • Flap Gates

    Flap gates are back flow prevention devices that are designed to open under an unseating head condition and close under a seating head condition. The flap is mounted offset from vertical to ensure a positive closing via gravity. A resilient seal is utilized to achieve low leakage between the frame and flap. Flap gates can be provided in ...

    By RW Gate Company based in Troy, NEW YORK (USA).

  • Armtec - Water Control Gates

    Armtec is an industry leader in water control gates for wastewater treatment plants, water treatment plants, and irrigation and flood control projects. Thousands of customers globally can attest to the high quality of Armtec’s gate products.

    By Armtec based in Concord, ONTARIO (CANADA). from Water Control Gates Product line

  • Model RR Series - Round Flap Gate

    Round swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated construction, with tight sealing by means of an elastomer seal. Available in a wide range of dimensions and for many different pressure heads. May include a ...

    By Orbinox based in Anoeta, SPAIN. from Round Flap Gate Product line

  • Coldwell-Wilcox - Flexible Flap Gates

    Flexible flap gates are excellent for water and wastewater applications. Suited for gravity flow by opening under very low unseating head. Also suited for pump discharge and withstanding the pump discharge slamming action. A flexible flap gate usually consists of a stainless steel frame, minimum 1' thick reinforced flexible neoprene cover, ...

    By Coldwell-Wilcox Technologies, LLC based in Cincinnati, OHIO (USA). from Flexible Flap Gates Product line

  • Neoprene Flap Gates

    The Plasti-Fab flexible Neoprene Flap Gate is the answer for applications requiring corrosion resistant equipment suitable for sea water and most low pH water. Simple construction and light weight make installation and maintenance easy. The Flap Gate's molded body of reinforced copolymer has a 125 lb. pattern flange and a molded neoprene flap ...

    By Plasti-Fab, Inc. based in Tualatin, OREGON (USA). from Neoprene Flap Gates Product line

  • Model F-55 - Heavy Duty Flap Gates

    WATERMAN F-55 HEAVY DUTY FLAP GATES are designed for applications with maximum 55 foot seating heads.  Each gate is custom-made to job requirements.

    By Waterman Industries based in Exeter, CALIFORNIA (USA). from Heavy Duty Flap Gates Product line

  • Model F-40 - Heavy Duty Flap Gates

    WATERMAN F-40 HEAVY DUTY FLAP GATES are designed for applications with maximum 40 foot seating heads.

    By Waterman Industries based in Exeter, CALIFORNIA (USA). from Heavy Duty Flap Gates Product line

  • Flap Gates and Bear Trap Gates

    The functional principle of weir flaps may be simple, the technology behind it is all the more complex. Because of the hydro-dynamic forces associated with discharging high water the demands on design are exacting. BRAUN flap gates are customized to specific requirements. Our competent engineering department develops the best and most efficient ...

    By Braun Maschinenfabrik Gesellschaft m.b.H. based in Vöcklabruck, AUSTRIA. from Flap Gates and Bear Trap Gates Product line

  • Golden Harvest - Model GH-39 - Stainless Steel & Aluminum Flap Gates

    Golden Harvest, Inc. supplies Flap Gates in stainless steel, aluminum, and spun aluminum and supplied with neoprene seals. Flexible design available in square, rectangular and circular shapes. Automatic, circular opening for gravity flow and pump discharge can be aluminum or stainless steel. Stainless steel construction is recommended for pump ...

    By Golden Harvest, Inc. based in Burlington, WASHINGTON (USA). from Stainless Steel & Aluminum Flap Gates Product line

  • Crest Gate (Bottom hinged flap gate)

    It consists of a straight or curved retaining surface, pivoted on a fixed axis at the sill. Flap gates are also used on top of segment gates and fixed-wheel gates.

    By Mecan-Hydro based in Granby, QUEBEC (CANADA). from Crest Gate (Bottom hinged flap gate) Product line

  • Pivot Gates

    Produced in sizes width = B up to 6,000 mm and in heights = H up to 2,000 mm. The main axle of the gate plate can be positioned top or bottom. The pivot gate is available as overflow gate or underflow gate. The pivot gate may be driven by hydraulics from a dry machine room or by electrical actuator. The main axle is equipped with greased bronze ...

    By Gerhardt Christensen A/S based in Storvorde, DENMARK. from Pivot Gates Product line

  • Double Pendelum Gate

    Double flap gates are used to seal vacuum chambers with simultaneous discharging of dust-based and flowing material. KREISEL double flap gates are particularly suitable for discharging of highly abrasive bulk materials at the basic industry as well as the chemical industry: minerals, nature stone, ash, cement, ceramics and coal. The operating ...

    By KREISEL GmbH & Co. KG based in Krauschwitz, GERMANY. from Double Pendelum Gate Product line

  • Weir Gates

    Kuenz weir gates are designed and manufactured specific to a project. Our weir gates are installed with or without flaps and are in particular suited for silt removal in case of flood waters. The world needs energy. Kuenz´s innovative technologies take care of that. Kuenz provides customized, integrated concepts for every customer. Decades ...

    By Kuenz GmbH based in Hard, AUSTRIA. from Weir Gates Product line

  • Canal Valve (Slide Gate)

    Slide Gate Valve assemblies help control the desired water level elevations in rivers, canals, wastewater treatment plants and recreational lakes and are found in engineering specifications for airports, fire departments, bus barns, city maintenance departments, agriculture facilities, chemical storage areas, fish hatcheries and equipment auction ...

    By ParkUSA based in Houston, TEXAS (USA). from Canal Valve (Slide Gate) Product line

  • 14″ Electric Sand & Salt Spreaders

    1/2 HP Electric, Stainless motor. 1/2 HP Electric, Stainless motor. 50:1 gearbox reduction @ conveyor. Enclosed motor platform w/ rear venting. 1 1/8″ diameter conveyor shafts w/ 6T cast sprockets. 662 Pintle chain w/ 8500# tensile strength. Greasable, self aligning, drive bearings throughout. Recessed lifting hook & 4 corner tie down ...

    By Coastal Metal Fab based in Topsham, MAINE (USA). from 14″ Electric Sand & Salt Spreaders Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you