wastewater mixing Articles
-
District of Salmon Arm - Case Study
Turborator® technology has been providing aeration and mixing solutions to the wastewater industry since 1989 and is a featured component in the first ATAD system in North America, The District of Salmon Arm Water Pollution Control Centre, Salmon Arm, BC which continues to operate today. ...
-
Analysis of key aspects of the dispersion of industrial wastewaters to delimit environmental mixing zones
In the VERTITOX research project (018/RN08/02.1), where the Principal Researcher (IP) of this application took part, a methodology for delimitation of environmental mixing zones of urban and industrial discharges was developed. That work allowed verification of the existence of critical issues in establishing the extent of these areas. Such issues lie in the statistical treatment of the ...
-
Development of adsorbent for the simultaneous removal of organic and inorganic contaminants from aqueous solution
In this study, a modified adsorbent, alginate complex beads, was prepared and applied to the removal of mixed contaminants from wastewater. The alginate complex beads were generated by the immobilization of powdered activated carbon and synthetic zeolites onto alginate gel beads, which were then dried at 110 °C for 20 h until the diameter had been reduced to 1 mm. This dry technique increased the ...
-
Electrochemical decomposition of fluorinated wetting agents in plating industry waste water
Electrochemical decomposition of fluorinated surfactants (PFAS, perfluorinated alkyl substances) used in the plating industry was analyzed and the decomposition process parameters optimized at the laboratory scale and production scale of a 500-liter reactor using lead electrodes. The method and system was successfully demonstrated under production conditions to treat PFAS) with up to 99% ...
-
Energy savings & fast pay-back for Industrial / Municipal Wastewater Lagoon System USWWOR-LOC757.001 (ID150) - Case Study
Topics: Wastewater, complete mix, partial mix, sludge reduction, energy savings Overview: The City wastewater treatment plant (WWTP) consists of two lagoons. The primary lagoon is a complete mix pond covering 2.8 acres with a 12 ft operating depth and a total volume of 6.9 MG. The secondary lagoon is a partial mix pond with three cells covering 35.2 acres with a total operating depth of 20-25 ft ...
-
Simulation of municipal-industrial full scale WWTP in an arid climate by application of ASM3
In developing countries, and due to the high cost of treatment of industrial wastewater, municipal wastewater treatment facilities usually receive a mixture of municipal wastewater and partially treated industrial wastewater. As a result, an increased potential for shock loads with high pollutant concentrations is expected. The use of mathematical modelling of wastewater treatment is highly ...
-
Usak Karma OSB - Case Study
Project name Usak Mixed Organized Industrial Zone Wastewater Treatment Plant Employer Usak Mixed Organized Industrial Zone Head of Entrepreneur Association Contractor Enta Muhendislik Antma Taah. San. Ve Tic. Ltd. Sti. Location of the plant Usak/TURKEY Scope of work Industrial and Domestic Wastewater Treatment Plant Contract Date 2005 Completion Date 2006 Flowrate of the plant:24.000 mJ/ ...
-
City / Paper WWTP / Tissue Manufacturer - Case study
Topics: Wastewater, complete mix, partial mix, sludge reduction, energy savings Overview: The City wastewater treatment plant (WWTP) consists of two lagoons. The primary lagoon is a complete mix pond covering 2.8 acres with a 12 ft operating depth and a total volume of 6.9 MG. The secondary lagoon is a partial mix pond with three cells covering 35.2 acres with a total operating depth of 20-25 ft ...
-
Membrane filtration and sonication for industrial wastewater reuse
This paper presents an experimental study aimed at estimating the efficiency of the innovative process of ultrafiltration (UF) combined with sonication (Son.) for the refinement of treated effluent to be reused in wet textile processes. Such a novel approach, which has not yet been employed on a full industrial scale, has been experienced at pilot scale on the secondary effluent of the ...
-
An outline of textile wastewater treatment
The issues of wastewater are not restricted to any particular industry. Almost every sect including textile, manufacturing, and food processing industry are going through the harsh situation of wastewater, and with the implementation of versatile technologies, different organisations are trying their best to eradicate the soaring volume of wastewater. The textile industry is characterized its ...
-
Effective carbon and nutrient treatment solutions for mixed domestic-industrial wastewater in India
The present study evaluates effectiveness of up-flow anaerobic sludge blanket (UASB) reactor followed by two post-anaerobic treatment options, namely free-surface, up-flow constructed wetland (FUP-CW) and oxygen-limited anaerobic nitrification/denitrification (OLAND) processes in treating sewage from the peri-urban areas in India receiving illegal industrial infiltrations. The UASB studies ...
-
TOTALOX Odor Eliminator: The Two Step Treatment in One Package - Case Study
Collection Systems Are Tough! With miles of pipe and multiple pumping stations, managing the complexity of a wastewater collection system is a full time job. The main task is to maintain the system and keep it flowing. But also near the top of that task list is preventing nuisance odors. When the phone starts ringing, you become a detective. First, you have to find the site or sites of odor ...
-
Energy Savings, Mixing, & Odor Control- Industrial & Municipal Wastewater (ID168) - Wastewater Treatment Plant USCAWW-LOC465.001 - Case Study
Topics: wastewater ,industrial, complete mix, odor control, sludge reduction, energy savings Overview: This wastewater treatment plant (WWTP) consists of two separate treatment avenues for residential and industrial wastewater flows. The industrial waste stream varies seasonally, and comes from food processing wastes from poultry processing, baby food processing, and winery waste. Average ...
-
Metals & Finishing Industrial Wastewater Treatment
Industrial Wastewater Treatment Success Stories Metals and Finishing Industrial Wastewater Treatment Aircraft Components - 80% Cost Reduction A major manufacturer of aircraft engine components was having difficulty meeting their effluent limits for COD (limit 235 ppm) and Zinc (limit 1.0 ppm). The source of the wastewater came from these processes: Mop water with alkaline cleaner ...
-
Reduced Emissions for Landfill Gas Installations
The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by the ...
By Sulzer Ltd.
-
Happy Customers, Healthy Business
As the wastewater treatment industry becomes more competitive, customer service gives businesses the chance to rise above their competitors. Customer service is key in all industries. The water treatment industry is no exception. As the treatment of both drinking water and wastewater becomes a continually more competitive industry, with an ever-growing number of new companies offering ...
-
Industrial Wastewater Treatment
Industrial wastewater contains many toxic and harmful substances, which not only pollute the environment, but also endanger human health. Industrial wastewater treatment has always been concerned by people and social. Industrial wastewater is divided into phenol wastewater, mercury-containing wastewater, oil-containing wastewater, heavy metal wastewater, cyanide-containing wastewater, Paper mill ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you