Water Infiltration Equipment For Water And Wastewater Near Massachusetts
-
PremiumManufactured by Cornell Pump LLCbased in USA
The immersible motor is a unique concept that allows it to operate in flooded conditions up to 30 feet deep for up to two weeks. It offers the safety of a submersible motor and the convenience of off-the-shelf maintenance. The motor is a premium-efficiency, inverter-duty TECB (totally enclosed, blower-cooled) motor. The blower shuts down if the motor becomes submerged without affecting the main ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching and drainage efficiencies. The rings are centered by the cross handle – which is welded in place at the top of the unit. The rings are inserted into the turf by pushing and twisting on this cross handle. An optional dead blow ...
-
Manufactured by Plasti-Fab, Inc.based in USA
Available in fully insulated or general purpose models to provide complete security and weatherization for expensive instrument and sampler ...
-
Manufactured by Roctest - part of Nova Metrix LLCbased in CANADA
The multi-level vibrating wire piezometer is perfect for measuring pore pressures at various depths beneath a single surface location. It allows for quick and reliable installations because multiple PW-series piezometers are connected to a single communication cable. The multi-level piezometer provides significant advantages in terms of time, resources and cost reduction related to installation, ...
-
Manufactured by EcoBailers | Environmental Test Products, Inc.based in USA
Waterra Water Level Indicators / Sensors are 5/8 inch ( 1.6 cm ) diameter 316 stainless steel probes attached to graduated tapes. The dog bone design prevents adherence to wet surfaces such as well casings.Waterra Water Level Indicators / Sensors are available in open or closed reel configurations.The 3/8″ stainless steel flat tape tapes are Polyethylene coated and graduated to the nearest ...
-
Manufactured by Stancor-Industrial Flow Solutionsbased in USA
Design Advantages: 304 Stainless steel construction. Double mechanical seals run in a separate oil-filled com partment. Outboard lip seal helps prevent solids from infiltrating primary sealing unit. High Torque motor with large service factor. Thermal overload protection. Diffuser solid silicon, prevents wear and resists chemical attack. Stainless steel impeller for extended life. Viton ...
-
Manufactured by Stancor-Industrial Flow Solutionsbased in USA
Stancor’s Oil Minder Systems have been utilized with customers existing controls and pumps. Options are almost limitless with the adaptive features of our Oil Minder® logic. We are able to operate and shut down multiple pumps, send a variety of alarms and notifications via SCADA or traditional hardwiring. We have installations in warm liquids, freezing temperatures with sump heaters as ...
-
Manufactured by American Concrete Industriesbased in USA
As traditional wastewater disposal areas age, the infiltration rate of the soil decreases causing effluent to pond in the disposal field. This ponding progresses over time until eventually the disposal field "fails." Failures usually take the form of effluent breakouts on the top or sides of the disposal area or effluent back-ups into the building. Often there is no warning that a disposal area ...
-
Manufactured by Preload LLCbased in USA
Combined sewer overflows (CSO’s) and sanitary sewer overflows (SSO’s) occur during major storm events due to a wastewater system’s design or infiltration into piping. Sewage system overflows can create serious health hazards and can endanger habitats, leading to closure of streams and recreation waterways. Preload tanks are the cost-effective solution to collect sewage system ...
-
Manufactured by ULC Technologies, LLC, part of SPX Technologiesbased in USA
The PRX250 Live High Pressure Gas Main Camera Inspection System is the most comprehensive, innovative live gas main camera system to provide gas networks with the highest quality, most cost effective and reliable pipeline inspection possible. The use of our PRX250 system is proven to provide significant cost savings, improved safety, increased efficiency and higher customer ...
-
Manufactured by CVD Equipment Corporationbased in USA
Chemical vapor infiltration (CVI) is a chemical vapor deposition (CVD) process that is performed at low pressures to allow for coating the internal surfaces of a porous material. Using heat and low pressure, precursor vapors penetrate the pores / fibers of the material and deposit to form a conformal coating on the internal surfaces. Our CVI platform is used to coat the internal surfaces of ...
-
Manufactured by Fabco Industries, Incbased in USA
FocalPoint is a scalable biofiltration system with high flow rate, box-shaped underdrain that can be constructed for water detention, retention/infiltration and recycling/harvesting. FocalPoint’s next generation high-flow biofiltration system is the key to its high performance. This advanced media technology provides high flow rates and best available pollutant removal rates for common ...
-
Manufactured by Garrison Flood Control, a Division of Garrison Systems, LLCbased in USA
The Serpent™ Flood Control Tube is a rapidly deployable flood control tube, that can be easily brought on site and quickly inflated to create a protective barrier between rising flood waters and your property and assets. Each 30ft tube has a diameter of 40.5” and includes a 6ft skirt that is extended in the direction of water, providing ballast when water levels rise. Multiple inflatable flood ...
-
Manufactured by Garrison Flood Control, a Division of Garrison Systems, LLCbased in USA
The Minnow sandbag alternative offers compact storage, incredible water absorption, and a no-mess clean up after a flood. Unlike sand bags, which must be filled and deployed using a large crew, the Minnow sandless sandbag contains a super absorbent gel, which absorbs water and inflates, creating a solid barrier against flooding. Minnow bags can be stored flat, transported quickly to the flood ...
-
Manufactured by Garrison Flood Control, a Division of Garrison Systems, LLCbased in USA
The Serpent™ Flood Control Tube is a rapidly deployable flood control tube, that can be easily brought on site and quickly inflated to create a protective barrier between rising flood waters and your property and assets.Each 30ft tube has a diameter of 40.5” and includes a 6ft skirt that is extended in the direction of water, providing ballast when water levels rise. Multiple inflatable flood ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
The reliable ABS Nopon disk diffuser system is one of the world’s most widely-installed fine-bubble aeration systems, available in five alternative diffuser models. Preassembled diffuser elements enable fast and easy installation. Retrofits are available to increase aeration ...
-
Manufactured by Process Wastewater Technologies LLCbased in USA
Process Wastewater Technologies and Applied Engineering Technologies (AET) have partnered together to develop a fully-automated, patented* treatment shaft process for CSO control systems. The technology provides proper disinfection contact time, vessel flushing, air venting, odor control, surge control, skimming, and settling in a footprint that is less than 15% of a surface storage ...
-
Manufactured by AquaShield, Incbased in USA
Aqua-Ponic Biofiltration System is the latest technology to provide a modular proprietary, permanent, post-construction biofiltration system. The innovative Aqua-Ponic™ design is unique when compared to other manufactured biofilters in terms of filtration, treatment flow rates and importantly, plant ...
-
Manufactured by Imbrium Systems Inc.based in CANADA
Jellyfish Filter is a stormwater quality treatment technology featuring pretreatment and membrane filtration in a compact stand-alone system. Jellyfish Filter removes floatables, trash, oil, debris, TSS, fine silt-sized particles, and a high percentage of particulate-bound pollutants; including phosphorus and nitrogen, metals and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you