Water Monitor (Water Intake Structures) Equipment
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pCO2 system operates ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Relay Assembly for Intake pump PCO2 Optional relay to control an external water pump. The 8050 system includes a leak detection circuit that shuts off the water intake valve if a leak is detected inside the system. This switch would be used to turn off an external pump. Kit, Relay Assembly for Intake pump PCO2 Optional relay to ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-4100XDC is a closed cell version of the rugged, world industry standard TD-4100XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning systems. It utilizes a clear tube flow cell to contain ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-120 Oil in Water Monitor, developed from more than 20 years of real-world experience with UV fluorescence technology, offers industry leading features. The online monitor is resistant to dirty or turbid water influences that typically impact UV absorption or light scatter instrument measurements—allowing ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-4100XDC General Purpose oil in water monitor is a lower cost version of the industry standard TD-4100XDC and is designed for use in non-explosive atmospheres. It was designed for normally clean water applications, or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning ...
-
Manufactured by Turner Designs Hydrocarbon Instruments, Inc.based in USA
The TD-4100XD General Purpose monitor is a lower cost version of the industry standard TD-4100XD and is designed for use in non-explosive atmospheres. It was designed for dirty water applications and uses our standard EZ Access noncontact flow cell for lower maintenance. Field validation is via our CheckPOINT™ solid calibration ...
-
Manufactured by Multisensor Systems Ltd.based in UNITED KINGDOM
The MS1200-T (Touchscreen version) is an on-line Oil in Water monitoring system which provides low level measurements of Hydrocarbon, Oil and VOCs concentrations in water. It is the ideal water intake protection system for drinking and industrial water treatment plants. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pC02 system operates ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Optional relay to control an external water pump. The 8050 system includes a leak detection circuit that shuts off the water intake valve if a leak is detected inside the system. This switch would be used to turn off an external ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Water Intake W/O Pump . Kit does not include water intake pump (A pump must be specified for the desired voltage (110 or 220 Volt) and flow rate, Includes .375 ID reinforced tubing (specify length needed), tube fittings for the pump, and six hose clamps. Plase call for a quotation including the ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Water Intake W/O Pump PCO2 Kit, Water Intake W/O Pump Kit does not include water intake pump (A pump must be specified for the desired voltage (110 or 220 Volt) and flow rate, Includes .375 ID reinforced tubing (specify length needed), tube fittings for the pump, and six hose clamps. Plase call for a quotation including the pump. Kit, ...
-
Manufactured by AquaDectbased in NETHERLANDS
The MOSSELMONITO (Musselmonitor) is a biological early warning system for continuous on-line monitoring of surface waters, seawater, effluents, drinking water intakes, even of drinking ...
-
Manufactured by Multisensor Systems Ltd.based in UNITED KINGDOM
The MS1200-S (Standard version) is an on-line Oil in Water monitoring system which provides low level measurements of Hydrocarbon, Oil and VOCs concentrations in water. It is the ideal water intake protection system for drinking and industrial water treatment plants. ...
-
Manufactured by Lafayette Instrument Companybased in USA
These systems automatically measure and record the undisturbed, real-time feeding and activity behavior of socially housed rodents in a standard home environment around the clock. The HM-2 Feed and Water Intake and Activity Monitor Systems automatically measure and record the undisturbed, real-time feed and water intake and the ...
-
Manufactured by In-Situ Processbased in USA
The TurbiTechw² LR Sensor has been specifically designed to monitor final treated, portable and filter water. The sensor is extremely sensitive and is capable of discriminating changes in Turbidity of less than 0.1 FTU. The 90º light scatter monitoring technique makes the sensor sensitive to a wide range of particle sizes, from ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The NivuFlow Mobile 600 was developed particularly for long-term measurements in field operation without external power supply. Measurements for checking and verifying can be carried out with the self-sufficient and portable system without any problems even in harsh environments. Battery lifetimes of several weeks or even months reduce personnel costs for maintenance and data readout ...
-
Manufactured by Aquas Inc.based in TAIWAN
The Sampler is ideal for automatic collection and preservation of liquid samples for water and wastewater monitoring applications. There are multiple modes of sampling such as manual operation and triggered via signals from external ...
-
Manufactured by bbe Moldaenke GmbHbased in GERMANY
human health and to monitor ...
-
Manufactured by ISH Pumps Olomouc A.S.based in CZECH REPUBLIC
Medium temperature from –40 up to +160o oC C; intake working pressure for DN up to 80 – 5 bars, DN from 100 – 2 bars; outlet working pressure for DN up to 80 – 10 bars, DN from 100 – 8 bars; medium density from 600 kg. up to 1900 kgm m-3 -3; k mm .sinematic viscosity up to 75 2 -1; ph 0-14, acc. to the used materials; contents of solid particles up to 15% of weight ...
-
Manufactured by Enerquip ASbased in NORWAY
The Thor TRCM is for the larger water intakes and trash racks that goes deep and needs to handle large waste fractions with a great removal capacity up to heavy logs and waste ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you