Only show results available in Virginia? Ok

Water Leak Detection Applications

  • Premium

    Water treatment solutions for cooling water treatment

    Efficiency is everything in the cooling water circuit. Everything at ProMinent revolves around the perfect cooling water circuit, which needs to experience few losses over its long life. The precise metering of inhibitors and biocides and suitable filters make this possible.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Water control for water loss management industry

    By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA).

  • Premium

    Mining & minerals solutions for acid mine drainage industry

    Through the application of modern mining technologies, WesTech helps to assure that the byproducts of minerals extraction process are made inert, reliably contained and kept from causing environmental damage. Implementation of WesTech tailings processing technology assures protection of the groundwater, surface waters, wildlife and communities which in the past have been the victims of tailings dam leaks and levy failures.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Monitoring of leaks in heat exchangers

    Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample analysis.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Assessing underground infrastructure for water industry

    America’s growth and development is dependent on reliable water provisions. Currently 3.9 trillion gallons of water are consumed in the United States per month, & the average American uses 176 gallons of water per day. Sources for drinking water are becoming less reliable as time passes. While nearly 70 percent of the world is covered by water, only 2.5 percent of it is fresh with the rest being saline and ocean-based. Water is a precious resource, therefore needs to be conserved and used appropriately. In order to achieve this, water utilities must increase efficiency. Much of current water loss is blamed on outdated infrastructure since a large part of the water delivery systems in the United States dates back to years shortly after World War II. Water utilities require a thorough and cost-effective means of inspecting their assets. EnTech can help you meet your water sustainability and efficiency needs.

    By EnTech Engineering Company based in Saint Louis, MISSOURI (USA).

  • Premium

    Water Leak Location for the Water Utilities

    Sewerin`s water leak noise loggers are used to monitor water networks for early warning of water leaks. Alarms are sent via SMS or received by radio drive by. Our correlators and ground microphones are then used to pinpoint the water leak`s position. Our equipment is used to save water in many countries by all the world`s major water companies.

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Hose pumps for gold mining industry

    Gold mining is a tough, uncompromising process and the mining industry is equally demanding being driven by the goals of mine profitability, plant efficiency, cost minimisation and yield maximisation.

    By Albin Pump SAS based in Montelimar, FRANCE.

  • Premium

    Water Leak Location for the Leak Detection Industry

    Our water leak location instruments are used to firstly identify leaks in water distribution networks (pre-locate) and then to pinpoint their position using one of our correlators and/or ground microphones.

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Flow & Energy Management Solutions for Plant & Machine

    Spire Metering offers several solutions for leakage detection. The flowmeters are used to monitor cooling water in machining process. They are used also in liquid process control and leakage detection applications.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Gas Monitoring and Leak Detection in Underwater Application for the Offshore Oil and Gas

    With over 300 sensors and systems sold world-wide and over 35 scientific users publications, Franatech is market leader for underwater methane detection and monitoring. Franatech is a developer and supplier of sensors for detection of gases in water. The company has more than 15 years experience in subsea applications, working with all kinds of sensing technologies. Coming from a scientific environment and further engaged in long term co-operation with universities and institutions, the company has been involved in several oil and gas projects, piloting the use of point sensors for continuous monitoring of gas leakages.

    By Franatech GmbH based in Lüneburg, GERMANY.

  • Inspection Equipment for the Process Industry

    Safety and cost are two of the biggest concerns in industry today. At Inspectahire we realise this and aim to minimise the effect of them both. We do this by using the latest inspection technology which can either be operated remotely or if the requirements allow, by man.

    By Inspectahire Instrument Company Ltd. based in Aberdeen, UNITED KINGDOM.

  • Kytola Oilan A4 for Paper Machine Circulating Lube Systems

    Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation point.

    By Kytola Instruments Oy based in Muurame, FINLAND.

  • Smoke generator device for leak testing & building envelope testing

    Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak. After Concept developed a bespoke system for their aircraft testing requirements, a spokesperson for the RAF commented: `The use of smoke as a means by which to detect cabin pressurisation leaks has been shown to be extremely effective and is unquestionably superior to any alternative detection method used to date!`

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically influenced corrosion (MIC).

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • manufactuer of geophysical exploration equipment

    Resources Prospecting - Underground water detection - Geothermal prospecting - Energy resource prospecting - Metal and nonmetal mineral resources survey Engineering Geology Exploration - City engineering exploration - Cave exploration - Pile foundation Environment Detection - Underground pollutant change detection - Seawater Intrusion Detection - Dam Detection - Underground tank leak detection - Slope failure detection Others - Geological mapping - Archaeology - Drilling/cross hole detection

    By ST Geomative Co., Ltd based in shenzhen, CHINA.

  • Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Smoke generator device for building envelope, energy studies & air tightness testing

    The air tightness or leakage rate of a building is the uncontrolled flow of air through holes, gaps and cracks in the fabric of a building, which may not be detectable simply by looking at the outside of the building. Filling a building or void with smoke and pressurising that volume, will result in a visible discharge of smoke from any problem areas. Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Water Monitoring and Flow Measurement Systems for Water Supply

    Although there is enough water on earth, its uneven distribution, the rising population and our carelessness drinking water starts to get short. In the future more and more pipelines for drinking water will be built all over the globe. In order to operate huge and complex pipe networks efficiently, water flow measurement and flow monitoring will become necessary. The increasing efficiency of ultrasonic flow meters will make such calculations more and more effective.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you