Water Leaks Equipment For Water And Wastewater Available In Alberta
-
PremiumManufactured by Cornell Pump LLCbased in USA
The immersible motor is a unique concept that allows it to operate in flooded conditions up to 30 feet deep for up to two weeks. It offers the safety of a submersible motor and the convenience of off-the-shelf maintenance. The motor is a premium-efficiency, inverter-duty TECB (totally enclosed, blower-cooled) motor. The blower shuts down if the motor becomes submerged without affecting the main ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
The AQUASCOPE 3 is a high performance water leak detector designed for use by leakage technicians and plumbers to find leaks on water mains, water services and in residential or commercial properties. The acoustic microphone in this water leak detector amplifies the mechanical vibration created when water in a pressurized system exits the pipe wall. With an electronic listening stick, magnet, ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
A portable, easy to use, thick black aerosol coating that seals water leaks and fills cracks and voids on most roofing surfaces. It is an extremely durable sealer and coating that will not sag or drip in summer heat or crack or peel in winter cold. It sprays as a liquid, flows into low spots, cracks and crevices then dries to a thick, black rubberized coating. ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Powerful high-end touchscreen correlator designed specifically to find leaks on large diameter pipes over long distances – intelligent, non-intrusive and user-friendly. This correlator is currently the most advanced correlator in the ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 330Z high-pressure plunger pump provides a max. operating pressure of 1500 bar and a max. flow rate of 319 l/min. With operating pressure up to 1500 bar and flow rates of up to 605 l/min, these Z-series plunger pumps are the ideal manual tool for industrial cleaning tasks such as paint stripping and descaling. The plunger guide ensures a long service life for the seal system. The sealing ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 150M high-pressure plunger pump provides a max. working pressure of 3000 bar and a max. flow rate of 34 l/min. The M-series pumps are ideally suited for tasks such as cutting, dismantling, decoating and derusting. With the built-in central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
The AquaScope 550 is the world’s first and only acoustic leak detector to have 'frequency shifting' to assist in the pinpointing of low frequency leaks found in PVC and large diameter pipes. Furthermore, the AquaScope 550 possesses impressive amplification capabilities. The professional leak hunter will therefore find even difficult leaks that are undetectable with other equipment. With a ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
A portable, easy to use, thick black aerosol coating that seals water leaks and fills cracks and voids on most roofing surfaces. It is an extremely durable sealer and coating that will not sag or drip in summer heat or crack or peel in winter cold. It sprays as a liquid, flows into low spots, cracks and crevices then dries to a thick, black rubberized coating. ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Controlled Atmosphere Glove Boxes provide a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment. Fiberglass-lined models are performance tested to maintain oxygen levels a low as 0.4 ppm and moisture levels as low as 2 ppm. Stainless steel-lined models are performance tested to maintain oxygen levels as low as 0.2 ppm and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen InstaPlug F-180 is a rapid setting, hydraulic water plug for sealing active water leaks, filling small voids and special anchoring applications. Typical industry applications are: eliminating water leakage in below grade concrete and masonry structures, manhole rehabilitation, and patches in new precast concrete sections and mortar joints. InstaPlug F-180 is also used for sealing ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
2-in-1-SOLUTION: House connection with integrated data logger. Easy set-up with tablet and servicemaster. Free sense app with automatic updates. Can be equipped with different sensors: acoustic / pressure / ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 400M high-pressure plunger pump provides a max. working pressure of 3000 bar and a max. flow rate of 67 l/min. The M-series pumps are ideally suited for tasks such as cutting, dismantling, decoating and derusting. With the built-in central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 70Y high-pressure plunger pump provides a max. operating pressure of 1,000 bar and a max. flow rate of 40 l/min. The ultra high pressure pumps of the Y-series are particularly compact. Due to the small size and low weight, they can be easily installed in unit with very small base frames. With operating pressures of up to 1000 bar, the Y-series pumps are ideally suited to a wide variety ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
Ultrasound flow-rate measurement on filled pipes. Measurements on any customary pipe material feasible. Data transfer via wifi, gsm, or usb interface possible. Easy to operate with any wifi-enabled terminal. Extremely long lifetime with exchangeable accummulator. Suitable for short-term and long-term ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Socks remove oil from troughs, vats, catch basins and sumps, Can be used indoors or out and will not absorb water, Absorbs oil from water around leaking machines exposed to rain and various other oil/water separation applications, Polypropylene socks are wringable for reclaiming liquids, Very high absorbency ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 250M high-pressure plunger pump provides a max. working pressure of 3000 bar and a max. flow rate of 40 l/min. The M-series pumps are ideally suited for tasks such as cutting, dismantling, decoating and derusting. With the built-in central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
The All-in-one smart leak locator that is both leak noise correlator, acoustic ground microphone and electronic listening stick in one single powerful product. It is operated by smartphone or tablet, using a great-looking, very intuitive and easy-to-use Android app. With EASYSCAN even beginners get good results. With just a few quick manipulations you transform your EASYSCAN from the correlation ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
GRP water tankmeans glass fiber reinforced modular water tank. These warehouses, which are produced with 100% domestic technology, are also known as glass reinforced polyester. It is among the preferred ones in the field of water storage. Its raw material consists of glass fiber clipped with polyester resin. The panels are produced by hot pressing method and are manufactured in high tonnage ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 550M high-pressure plunger pump provides a max. working pressure of 3000 bar and a max. flow rate of 105 l/min. The M-series pumps are ideally suited for tasks such as cutting, dismantling, decoating and derusting. With the built-in central valve design, these plunger pumps also have high volumetric efficiencies at high pressures. The carbide plungers used are extremely robust, provide ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The AquaTest T10 is a test rod with innovative technology and ergonomic design. Its strength lies in the prelocation of leaks in water pipe networks. The AquaTest T10 is the first test rod made by SEWERIN for which no additional receiver is required. The headphones are activated not by any common key but by a special sensor area. The noises that are picked up are visualised on a display ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you