Water Liners Equipment For Water And Wastewater Available In British Columbia
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
CorGal tanks are available without a roof for those applications that do not need to protect the stored product from the sun. The no roof or open top tank consists of corrugated galvanized steel wall sheets only. The no roof tanks are equipped with a geotextile preliner and a flexible membrane main liner for water containment and these tanks are pre-engineered for water containment only. An ...
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
CorGal tanks are available with flexible membrane covers for those applications that do not require a pitched roof and where snow loads are not a concern, however the possible reflection off the roof of the tanks is a concern. The membrane cover tank consists of corrugated galvanized steel wall sheets with a round flexible membrane that is stretched across the top of the tank opening. The cover ...
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
CorGal is an acronym used to describe corrugated and galvanized steel. CorGal is a registered trademark of Water Storage Tanks, Inc., the manufacturer of CorGal tanks. The CorGal tank was developed to provide a non-corrosive storage vessel for the liquid containment industry. Our tanks are popular and diverse with solutions for rainwater harvesting, stormwater management, fire protection, ...
-
PremiumManufactured by Reef Industries, Inc.based in USA
Permalon cross laminated, alloyed polyethylene pond liners are manufactured to exacting standards and provide superior performance in almost any environment. Managing water resources in demanding environments is often best accomplished with what are generally termed geomembranes or liners. Agricultural, aquaculture, recreational and other markets benefit from the use of hydraulic barriers that ...
-
PremiumManufactured by Water Storage Tanks, Inc.based in USA
The most common CorGal tanks in use are the tanks with 30-degree roofs. This standard tank consists of corrugated galvanized steel wall sheets with a 30-degree galvanized steel roof system. The standard 30-degree roof tanks are equipped with a geotextile preliner and a flexible membrane main liner for water containment. The corrugated high-rib roof (CHR) design is standard on all models 12′ ...
-
PremiumManufactured by Reef Industries, Inc.based in USA
Handling, treating and containing liquids is a requirement for a wide and varied array of businesses and industries. From raw water to hazardous waste leachate solutions, pit and lagoon liners conserve or contain liquids as reserves or to segregate them from the environment. Chemical inertness in the presence of aggressive media and long-term service life in exposed and extreme conditions are the ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
Manufactured by Fabric Solutions Australiabased in AUSTRALIA
And this is where DURATANK can save you a lot of hassle and save you from losing a lot of water. The versatility of a DURATANK water tank liner means a liner can be installed into most tanks. The essential thing is that the water tank shell is still structurally sound (it will still need to be able to hold the weight of the water) and there is internal access.So why not get an obligation free ...
-
Manufactured by Layfield Groupbased in CANADA
Enviro Liner 6000x is Layfield's flagship flexible membrane liner geomembrane brand with exceptional UV resistance and performance ...
-
Manufactured by Flow-Liner Systems, Ltd.based in USA
The Flow-Liner Sizing Tool™ is a must-have tool for the pipe lining company. This inexpensive technology could potentially save thousands of dollars in missed sized liners. Easily adapts to existing pipe inspection ...
-
Manufactured by RS Technik AGbased in SWITZERLAND
RS BlueLine is a liner technique cured-in-place pipe system for the renovation of potable water pipes and other pressure pipe systems, e.g. sewer rising mains, cooling mains pipes such as potable and waste water and other raw water pressurized systems. RS BlueLine® can be installed with either pressure drum or water column method and is subsequently cured with hot water or ...
-
Distributed by BTL Linersbased in USA
Storm water management, stormwater harvesting, stormwater attenuation and stormwater retention is increasingly critical in urban areas. A wide variety of stormwater catch basins and stormwater detention systems have been developed in recent years to support stormwater runoff solutions and to provide underground stormwater storage until the water can be used in a more controlled manner. Virtually ...
-
Manufactured by H. Butting GmbH & Co. KGbased in GERMANY
BUTTING has developed a glued mechanically lined pipe that can be laid using the reel-lay process, without using inner pressure or increasing the wall thickness of the corrosion-resistant liner: the GluBi pipe! The principle behind the pipe is very innovative: The basis is a mechanically lined BuBi® pipe, which is provided with an additional special adhesive between the carbon-manganese steel ...
-
Manufactured by Titan Environmental Containment Ltd.based in CANADA
EPDM geomembrane liner is an unreinforced, highly flexible material that is incredibly durable. With a soft rubber-like feel, similar to an inner tube, this UV-stable product has excellent tensile strength, is highly resistant to punctures, ozone, and weathering. EPDM geomembrane liners are an excellent choice for exposed applications or as water barriers within earthed dams. Its easy ...
-
Manufactured by FLUTebased in USA
During the installation process (a process known as eversion), a small everted segment of the liner is placed within the well casing. Water is then added to the interior of the liner to create an annular pocket. The addition of water in the liner to a level above the head of the water in the formation created a driving pressure between the liner's internal pressure and the pressure beneath the ...
-
Distributed by BTL Linersbased in USA
Reinforced polyethylene liners and polypropylene liners by BTL are outstanding choices for water storage, water retention or detention. Whether used in an underground tank, vault or cistern, or any above ground application, our flexible membrane liners are your best choice for the following: industrial pond liners, reservoir lining, lagoon liners, pit liners, cistern liners, agricultural pond ...
-
Manufactured by Rawell Environmental Limitedbased in UNITED KINGDOM
For below-ground structures, walls and roofing projects, the lining of small ponds and lagoons and the containment of fuels, oils and other ...
-
Manufactured by Buwatec B.V.based in NETHERLANDS
BUWAliner Extreme 0,75 mm is the solution for storage of water containing limited amounts of ...
-
Manufactured by Buwatec B.V.based in NETHERLANDS
The BUWAliner Fecatex is the ideal storage solution for manure and ...
-
Manufactured by CTO Enterprisesbased in USA
Your source for water storage tank liners made of flexible PVC for liquid containment. PVC tank liners are UV resistant, extend the life of your tank, and lightweight for easy installation. Water tank liners can be customized to perfectly fit any size tank. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you