Only show results available in Virginia? Ok

coal-to-liquid Equipment

  • FLUXUS - Model F401 - Single Channel Portable Flow Meter

    The FLUXUS F401 is FLEXIM's dedicated single channel portable flow meter for applications in the municipial water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor. As the measurement is carried out from the pipe wall outside and without contact with the water column, there is no ...

    By Flexim GmbH based in Berlin, GERMANY. from Portable Flowmeters for Liquids Product line

  • Liquid Cooled Eddy Current Absorbers

    Liquid-Cooled Eddy-Current Absorbers offer load-control response times measured in milliseconds, very-low rotating inertia, and compact high-specific load capacity. Compared to water-brake absorbers, they are especially well suited for applications that require plenty of low RPM torque capacity - as do many industrial-type engines. For ...

    By Land & Sea, Inc. based in Concord, NEW HAMPSHIRE (USA). from Absorbers / Water-Brake Product line

  • TankGuard - Model PPL and RMS - Liquid Monitor/Loss Alarm System

    Suitable for measuring both liquids and solid materials. It is suitable for use with the storage of diesel fuel, kerosene, gas oil types A2, C1, C2 and D as defined by BS 2869. It can be used with other liquids such as water and some chemicals but for suitability please check with the Andel Ltd.

    By Andel Ltd based in Huddersfield, UNITED KINGDOM. from Andel PPL Products Product line

  • Birkett - Model WB200 Series - Conventional Liquid Type Safety Relief Valve

    A full lift, full nozzle, conventional valve with dimensions to API526, the W200 is designed to safely relieve excess pressure in pumps, pipework, tanks, calorifiers, gas and oil separators and other process vessels. It is suitable for liquid applications.

    By Safety Systems UK Ltd. based in Manchester, UNITED KINGDOM. from Safety Relief Valves Product line

  • Model URVC05-02T - Liquid & Gas High Pressure Relief Valve

    Body: 303SS.Poppet: 303SS.Piston Seal: Viton.Spring Chamber & Ext. Spring Hardware (nonwetted): Carbon Steel.Spring Range: 20 – 55 psig / 1.38 – 3.79 barg.Can be factory set at a specific psi.Estimated Flow Cv: 2.71

    By Uehling Instrument Co based in Paterson, NEW JERSEY (USA).

  • Model CRLC series - Vertical Long-Shaft Pump

    CRLC series vertical long-shaft pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not ...

    By Hunan Credo Pump Co., Ltd. based in Xiangtan City, CHINA. from Vertical Pump Product line

  • Premium

    Shand & Jurs - Model 94630 - Pilot Operated Relief Valve (Magnetic Pilot)

    The Shand & Jurs Model 94630 Pilot Operated Relief Valves are designed to meet low pressure applications within a relief range from 1.0 psi thru 15 psi. These Magnavalves are ideally suited for land or marine use, specifically marine cargo tankers transporting LNG, cryogenic or low temperature liquids.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Pilot Operated Relief Valves Product line

  • Powell Railcar Padding System for Chlorine and Sulfur Dioxide

    Pressurized railcars of chlorine and sulfur dioxide frequently require additional pressure to facilitate the railcar unloading operation at user facilities. This practice - often called pressure padding - introduces air or nitrogen into the vapor space above the liquid in the railcar to force the liquid out of the liquid angle valve at the top of ...

    By Powell Fabrication & Manufacturing, Inc. based in Saint Louis, MICHIGAN (USA). from Chlorine Unloading Equipment Product line

  • WATER SEAL

    CRA designs & manufactures Water (liquid) Seals which provide prevention from flame flash-back, act as gas recovery systems and operate as an upstream pressure relief valve preventing gas flow from the inlet to the outlet.

    By Combustion Research Associates based in Noida (New Delhi-NCR), INDIA.

  • Bailey - Model 756 - Safety Relief Valve

    A safety relief valve is designed to automatically discharge gas, vapour or liquid from any pressure containing system, preventing a predetermined safe pressure being exceeded, and protecting plant and personnel.

    By Safety Systems UK Ltd. based in Manchester, UNITED KINGDOM. from Safety Relief Valves Product line

  • Numak - Model LAG14ER - Fluids System Control

    Safety system mod. LAG14ER, complete with control unit, antistatic plastic tank, two-electrode probe, assembly set. The system exploits the conductive property of water and by the two electrodes of the probe, set in the tank, it activates the possible alarm circuit. The controller controls the probe; when a loss occurs, the liquid level in the ...

    By Numak Srl based in Castello D`Argile (BO), ITALY. from Fluids System Control Product line

  • Model PPR15/25, SST - Pressure Relief Valve

    Relief valves control primary pressure (p1, ahead the valve) and can be used for gas and liquids applications. The pressure relief valve PPR15/25 is the ideal regulator for primary pressure control (back pressure control) and can be used wherever pressure has to be kept constant or limited.

    By ZIMMERLI Messtechnik AG based in Riehen, SWITZERLAND. from P-Valve Series- Relief Valve Product line

  • Model PPR50, SST - Pressure Relief Valve

    Relief valves control primary pressure (p1, ahead the valve) and can be used for gas and liquids applications. The pressure relief valve PPR50 is the ideal regulator for primary pressure control (back pressure control) and can be used wherever pressure has to be kept constant or limited.

    By ZIMMERLI Messtechnik AG based in Riehen, SWITZERLAND. from P-Valve Series- Relief Valve Product line

  • Model 9400 Series - High Pressure Valve

    The 9400 Series High Pressure Relief Valve provides pressure protection for various types of equipment at high-pressure conditions with liquid media. The 9400 Series valve exhibits the characteristics of a modulating relief valve in that there is virtually no blow-down, and therefore will reseat very near set point following relief.

    By Taylor Valve Technology based in Oklahoma City, OKLAHOMA (USA). from Safety Relief Valves Product line

  • CEI - Vacuum Pressure Trees

    Vacuum Pressure Trees Combine A 2'Brass Pressure Relief Valve, 1.5' Brass Vacuum Relief Valve, and A 2.5' Liquid Filled Vacuum Pressure AUGE. ALSO AVAILABLE AS AN OPTION FOR JURO-PAKS. Ttma Lever Valve Flange Assumblies Combine A Ttma Aluminum Flange, 'F' Coupling, Dust Cap, And A Brass Lever Valve.

    By Chandler Equipment, Inc. based in Springdale, ARKANSAS (USA). from Vacuum Pressure Trees & Ttma Assemblies Product line

  • ATLAS - High Performance Rupture Disc

    ATLAS offers higher pressure capability, while still featuring high performance benefits including a 95% operating ratio, liquid or vapor service, back pressure resistance and unrivaled cycling capability. Higher burst pressures of up to 1375 PSIG (94.8 BARG), makes ATLAS the endurance workhorse of the G2 Technology line of products.

    By Fike UK based in Maidstone, UNITED KINGDOM. from Safety Relief Valve/Pressure Relief Valve Protection Product line

  • Flow Accelerated Corrosion Simulator/Monitor

    Flow-accelerated corrosion (FAC) is the combined actions of corrosion and erosion in the presence of a moving fluid (liquid water or wet steam), resulting in the loss of material and localized reduction of wall thickness. The geometry of each piping component and the temperature of the fluid are the major influences on the rate of FAC. The highest ...

    By Jonas Inc. based in Pomfret, MARYLAND (USA).

  • mROY - Model LMI Series - Electromagnetic Dosing Pumps

    The LMI range's electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or ...

    By Milton Roy Europe based in PONT SAINT PIERRE, FRANCE. from Dosing Pumps Product line

  • Model Type A - Pressure Relief Valves

    The thermoplastic pressure relief valve protects equipment and systems against overpressures or sudden pressure surges. Able to handle highly corrosive or ultrapure liquids, the relief valve prevents pumps from dead-heading due to unexpected shut-offs downstream (also known as a bypass relief valve). It maintains back pressure in closed-loop ...

    By Asahi/America, Inc. based in Lawrence, MASSACHUSETTS (USA). from Pressure Relief Valves Product line

  • Series 100 - Cartridge Check Valves and Pressure Relief Valves

    Used for liquid or air, our cartridge check valves can be incorporated into virtually any mounting design. They are easily inserted into fittings, manifolds, or installed in-line. Available in standard or manual relief bleed styles, Series 100 Standard Check Valves and/or Pressure Relief Valves range from 1/4' to 3/4' sizes and opening pressures ...

    By Smart Products based in Morgan Hill, CALIFORNIA (USA). from Valves Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you